|◀ ◀ 469 - 480 of 569 ▶ ▶|
View:

Up To 92.1% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Single-stage gas valve and fixed-speeds, constant torque ECM.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • NOx emissions less than 40 ng/J; can be installed in California air quality management districts with a 40 ng/J NOx emission limit.
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosion-resistant, prepainted steel cabinet



    R92ESN0801716A


    R92ESN0801716A

    • Item#:
    R92ESN0801716A
    Manufacturer Item:
    R92ESN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92ESN-ICP-Warranty_Misc
    R92ESN-ICP_Install
    R92ESN-ICP_Spec

    80% Low NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • High temperature limit control prevents overheating
  • 1-piece pre-painted steel cabinet
  • Quieter in-shot burners
  • Innovative knobs for easy door removal and secure attachment
  • 4-position - Upflow/downflow/horizontal (left/right) installation
  • 3-position inducer elbow capability
  • Through the casing flue pipe for counterflow applications



    R80MSL0701716A


    R80MSL0701716A

    • Item#:
    R80MSL0701716A
    Manufacturer Item:
    R80MSL0701716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSL-ICP-Warranty_Misc
    R80MSL-ICP_Install
    R80MSL-ICP_Spec

    Up to 97% Multi-Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartment
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)



    R96MSN0401712A


    R96MSN0401712A

    • Item#:
    R96MSN0401712A
    Manufacturer Item:
    R96MSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R96MSN-ICP_Spec

    80% Multi-Speed Category I Venting Gas Heating Furnace 33-1/3" H x 14-3/16" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193



    R80MSN0701412A


    R80MSN0701412A

    • Item#:
    R80MSN0701412A
    Manufacturer Item:
    R80MSN0701412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSN-ICP-Warranty_Misc
    R80MSN-ICP_Install
    R80MSN-ICP_Spec

    Electric Duct Heater 14 KW 240 VAC 2 Step

    Warren SL15A Electric Duct Heater 14 KW 240 VAC 2 Step



    SL15A


    SL15A

    Item#:
    SL15A
    Manufacturer Item:
    SL15A
    Manufacturer:
    WARREN TECHNOLOGY
     
    SL15A

    Electric Duct Heater 15KW 240 VAC

    Warran SL15T Electric Duct Heater 15KW 240 VAC
    ,



    SL15T


    SL15T

    Item#:
    SL15T
    Manufacturer Item:
    SL15T
    Manufacturer:
    WARREN TECHNOLOGY
     
    SL15T_Spec

    Electric Duct Heater 5 KW 240 VAC 1 Step

    Warren SL5A Electric Duct Heater 5 KW 240 VAC 1 Step



    SL5A


    SL5A

    Item#:
    SL5A
    Manufacturer Item:
    SL5A
    Manufacturer:
    WARREN TECHNOLOGY
     
    SL5A_Spec

    Electric Duct Heater 10 KW 240 VAC 1 Step

    Warren SL10A Electric Duct Heater 10 KW 240 VAC 1 Step



    SL10A


    SL10A

    Item#:
    SL10A
    Manufacturer Item:
    SL10A
    Manufacturer:
    WARREN TECHNOLOGY
     
    SL10A

    Electric Duct Heater 10 KW 240 VAC 1 Step

    Warren SL10B Electric Duct Heater 10 KW 240 VAC 1 Step



    SL10B


    SL10B

    Item#:
    SL10B
    Manufacturer Item:
    SL10B
    Manufacturer:
    WARREN TECHNOLOGY
     
    SL10B

    Unit Heater Natural Gas Power Vented 400K BTU 83% 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)

    UDXC-400

    • Item#:
    UDXC-400
    Manufacturer Item:
    UDXC-400
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 75K 83% AFUE 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)

    UDXC-75

    • Item#:
    UDXC-75
    Manufacturer Item:
    UDXC-75
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 45K 83% AFUE 120 VAC

    Item#:
    UDXC-45
    Manufacturer Item:
    UDXC-45
    Manufacturer:
    REZNOR LLC
    |◀ ◀ 469 - 480 of 569 ▶ ▶|
    View: