|◀ ◀ 313 - 324 of 591 ▶ ▶|
View:

Ion 98 Variable-Speed Modulating Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • Operates quieter at lower heating rates
  • Variable speed induced draft combustion blower
  • Variable speed, constant airflow, communicating ECM blower motor
  • Insulated steel cabinet

    International Comfort Products G97CMN0601714B

    • Item#:
    G97CMN0601714B
    Manufacturer Item:
    G97CMN0601714B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G97CMN-ICP-Care_Misc
    G97CMN-ICP_Install
    G97CMN-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0451712B

    • Item#:
    G80CTL0451712B
    Manufacturer Item:
    G80CTL0451712B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    80% Gas Furnace 70K BTU 2-Stage 17-1/2" Wide

    Features & Benefits:
  • Variable 25-speed blower motor and two-stage gas valve provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • Wi-Fi enabled remote access with the Ion Gray Smart Thermostat
  • 5-Year No Hassle Replacement Limited Warranty
  • 10-Year Parts Limited Warranty upon timely registration
  • Lifetime Heat Exchanger Limited Warranty upon timely registration

    International Comfort Products G80VTL0701716B

    • Item#:
    G80VTL0701716B
    Manufacturer Item:
    G80VTL0701716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    QuietComfort 96 Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

    FEATURES:
  • Up to 96% AFUE in upflow and horizontal positions 95% AFUE in downflow position
  • All models earn the ENERGY STAR®
  • Two-stage heating operation
  • Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193 TOUGHER
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor QUIETER
  • Operates at quieter, lower heating rates
  • Two-speed induced draft combustion motor
  • Variable speed, constant torque ECM blower motor
  • Fully insulated steel cabinet EASIER TO INSTALL AND SERVICE
  • Direct vent (2-pipe), single-pipe venting or ventilated combustion air
  • 24 VAC humidifier terminal and electronic air cleaner terminal
  • 35 (889mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment conversion kits available
  • Four position upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Concentric vent available
  • Slide out heat exchanger assembly and blower assembly

    International Comfort Products G96VTN0401712B

    • Item#:
    G96VTN0401712B
    Manufacturer Item:
    G96VTN0401712B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96VTN

    QuietComfort 96 Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

    FEATURES:
  • Up to 96% AFUE in upflow and horizontal positions 95% AFUE in downflow position
  • All models earn the ENERGY STAR®
  • Two-stage heating operation
  • Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193 TOUGHER
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor QUIETER
  • Operates at quieter, lower heating rates
  • Two-speed induced draft combustion motor
  • Variable speed, constant torque ECM blower motor
  • Fully insulated steel cabinet EASIER TO INSTALL AND SERVICE
  • Direct vent (2-pipe), single-pipe venting or ventilated combustion air
  • 24 VAC humidifier terminal and electronic air cleaner terminal
  • 35 (889mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment conversion kits available
  • Four position upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Concentric vent available
  • Slide out heat exchanger assembly and blower assembly

    International Comfort Products G96VTN0601412B

    • Item#:
    G96VTN0601412B
    Manufacturer Item:
    G96VTN0601412B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96VTN

    96% Variable-Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Variable-speed blower motor and two-stage gas valve provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with compatible heat pump & thermostat for energy-saving heating performance
  • As a two-stage furnace, it operates at low stage most of the time to save energy, smoothly ramping up the heat to high stage as temperatures drop
  • Fully insulated cabinet helps keep the heat moving to your ductwork and provides quiet operation
  • Air purifier and humidifier compatible
  • Wi-Fienabled remote access with the IonSystem Control±

    International Comfort Products G96CTN0801714B

    • Item#:
    G96CTN0801714B
    Manufacturer Item:
    G96CTN0801714B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96CTN-Care_Misc
    G96CTN_Install
    G96CTN_Spec

    Variable 25-Speed Non-Communicating Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Variable 25-speed, constant torque ECM motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Supports two-stage cooling units
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • All units can be installed in air
    quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products G80VTL1102122B

    • Item#:
    G80VTL1102122B
    Manufacturer Item:
    G80VTL1102122B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80VTL_Spec.
    G80VTL1102122B_Spec

    80% Variable Speed Gas Heating Furnace

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL1352422B

    • Item#:
    G80CTL1352422B
    Manufacturer Item:
    G80CTL1352422B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    96% Variable-Speed Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Variable-speed blower motor and two-stage gas valve provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with compatible heat pump & thermostat for energy-saving heating performance
  • As a two-stage furnace, it operates at low stage most of the time to save energy, smoothly ramping up the heat to high stage as temperatures drop
  • Fully insulated cabinet helps keep the heat moving to your ductwork and provides quiet operation
  • Air purifier and humidifier compatible
  • Wi-Fienabled remote access with the IonSystem Control±

    International Comfort Products G96CTN1002122B

    • Item#:
    G96CTN1002122B
    Manufacturer Item:
    G96CTN1002122B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96CTN-Care_Misc
    G96CTN_Install
    G96CTN_Spec

    Variable 25-Speed Non-Communicating Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Variable 25-speed, constant torque ECM motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Supports two-stage cooling units
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • All units can be installed in air
    quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products G80VTL0902120B

    • Item#:
    G80VTL0902120B
    Manufacturer Item:
    G80VTL0902120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80VTL

    Unit Heater Gas Fired 60K BTU Separated Combustion

    Modine HDS60AS0111FBAN Unit Heater Gas Fired 60K BTU
    ,
    ,

    Modine HDS60AS0111FBAN

    Item#:
    HDS60AS0111FBAN
    Manufacturer Item:
    HDS60AS0111FBAN
    Manufacturer:
    MODINE MFG COMPANY
     
    HDS60AS0111FBAN_Spec

    Hot Water/Steam Heater Propeller Type Heater Water/Steam 18k BTU 120 VAC

    Available with top/bottom (Model HS) or side (Model HC) inlet/outlet piping, Modine horizontal steam/hot water unit heaters install quickly, easily and at low cost because they are lightweight. These units are particularly useful in greenhouses with low ceilings and are normally placed around the perimeter of the greenhouse to create a warm air blanket along the walls.
    • HSB units have top and bottom supply and return connection
    • This permits the units to be rotated 360 deg without piping change
    • This permits the units to be installed in low clearance areas
    • Units have a 2-piece casing for easy coil access
    • All model have tapped holes for suspension by threaded rod
    • Optional pipe hanger adapter kit, except HSB 18 and HSB 24 which mount directly to and are supported by the supply and return piping
    • Serpentine copper tube coil design has high resistance to thermal shock, event under high steam pressure
    • Absence of coil headers eliminate potential leak and increases coil face area without increasing overall size of units
    • Coil designed for greater water carrying capacity with lower friction loss
    • Dimensions are for standard and low outlet temperature model
    • 18000 BTU input at 2 lb steam 60 deg F E.A.T
    • Standard coil
    ,

    Modine HSB18S01

    Item#:
    HSB18S01
    Manufacturer Item:
    HSB18S01
    Manufacturer:
    MODINE MFG COMPANY
     
    Modine-HS-HSB-Catalog_Misc
    Modine-HS-HSB_Install
    |◀ ◀ 313 - 324 of 591 ▶ ▶|
    View: