Refrigeration Research 3738 Suction Accumulator 7/8" Vertical,

Refrigeration Research 3706 Suction Accumulator 1-3/8" Vertical,

Refrigeration Research 3703 Suction Accumulator 3/4" Vertical,

Refrigeration Research 3702 Suction Accumulator 5/8" Vertical,

Air conditioning, heat pump, truck refrigeration and many other applications require intermittent operation of the refrigeration compressor. Especially in remote applications, the suction line may trap or hold quantities of liquid which are suddenly dumped into the compressor as it starts up. This is frequently the cause of broken valves, pisTons, broken or bent connecting rods, blown gaskets and bearing washout. Proper installation of the Refrigeration Research suction accumulator in the suction line, just before the compressor, eliminates damage. If correctly sized, relatively large quantities of liquid refrigerant may return through the suction line and the suction accumulator prevents damage to the compressor. Liquid is temporarily held in the suction accumulator and metered back to the compressor along with any oil, at a controlled rate, through the metering orifice. Therefore, damage to the compressor is prevented and the compressor immediately and quietly goes to work.

Refrigeration Research 5315 Refrigeration Receiver, 6 lb Capacity, 3/8" SAE Inlet x 3/8" SAE Valve Outlet, 10" L x 5" Diameter

Refrigeration research receivers have been made continuously for over 50 years
• They are used widely by original equipment manufacturers throughout the industry
• They are backed by a reputation for quality and service
• These receivers with valves and fittings attached are hydrogen brazed for cleanliness and pressure tested for reliability
• 430 deg F fusible plug is installed on all receivers except #2030, #2039, and #9028
• All valves are supplied with steel stem caps with copper gaskets and brass flare nuts and caps, all receivers are powder coated for excellent corrosion resistance
• Pressure tested for 500 psi maximum working pressure
  

Designed to operate in a range of +40°F to -40°F evaporator temperature Fusible plug available on larger diameter units Solid copper fittings for easy brazing Corrosion resistant epoxy powder paint finish Inlet deflector blends refrigerant flow to prevent internal splashing and aids in the collection of refrigerant oil in the bottom of the accumulator Internal orifice with strainer for optimum oil return Maximum working pressure 3  4 diameter: 300 psig 5  6 diameter: 575 psig Fusible Plug: 430°F

Designed to operate in a range of +40°F to -40°F evaporator temperature Fusible plug available on larger diameter units Solid copper fittings for easy brazing Corrosion resistant epoxy powder paint finish Inlet deflector blends refrigerant flow to prevent internal splashing and aids in the collection of refrigerant oil in the bottom of the accumulator Internal orifice with strainer for optimum oil return Maximum working pressure 3  4 diameter: 300 psig 5  6 diameter: 575 psig Fusible Plug: 430°F

Designed to operate in a range of +40°F to -40°F evaporator temperature Fusible plug available on larger diameter units Solid copper fittings for easy brazing Corrosion resistant epoxy powder paint finish Inlet deflector blends refrigerant flow to prevent internal splashing and aids in the collection of refrigerant oil in the bottom of the accumulator Internal orifice with strainer for optimum oil return Maximum working pressure 3  4 diameter: 300 psig 5  6 diameter: 575 psig Fusible Plug: 430°F

International Comfort Products Fast Parts 1173719 Accumulator

Temprite 62028000 Steel and Borosilicate Glass Standard Filter Kit, 14" L x 3-1/2" Diameter

62028000

Henry Technologies S-5585 Oil Separator 5/8" OD