Henry Technologies S-8066 Receiver Vertical 3/8" Flare x 1/2" Flare,
,

Henry Technologies S-5587

Henry Technologies S-5587 Non Serviceable Conventional Oil Separator, 7/8" ODS, 3/8" SAE Return, 1/8" NPT Drain

• The function of a helical oil separator is to remove oil from the discharge gas and return it to the compressor either directly or through an oil management system
• Conventional oil separators can be used in a wide variety of applications, common applications include multi-compressor racks and remote condensing units
• These separators are designed for use with scroll and reciprocating type compressors, they are not recommended for screw or rotary vane compressors
• Conventional oil separators are intended for low pressure oil management systems
• ODS refrigerant connection
• SAE flare oil connections
• Low pressure drop
• No moving parts within oil separation zone
• Magnet on oil float to collect debris
• The main components- shell, end caps and connections are made from carbon steel
• The separation screens are made from brass
• The float assemblies are made from stainless steel, brass and copper

,
,

Henry Technologies S-5188

Henry Technologies 2-023-001

• Oil Separator Gasket for 1900 Series,
  ,
  
  
  
  

  Tjernlund 950-0020

Refrigeration Research 1918 Liquid Receiver 5" x 10" 6 Pounds,
,

Refrigeration Research 1911

Refrigeration Research 1921 Liquid Receiver Tank Assembly 4" x 10" 4 LBS,
,

Refrigeration Research 1918

Refrigeration Research 1911 Liquid Receiver 6" x 12" 10 Pounds 3/8" Flare x 3/8" Flare,
,

International Comfort Products Fast A/C Parts 1053427

Refrigeration Research 3738 Suction Accumulator 7/8" Vertical,
,

Refrigeration Research 3706

Refrigeration Research 3706 Suction Accumulator 1-3/8" Vertical,
,

Refrigeration Research 3703

Refrigeration Research 3703 Suction Accumulator 3/4" Vertical,
,

Refrigeration Research 3702

Refrigeration Research 3702 Suction Accumulator 5/8" Vertical,
,

Refrigeration Research 3700-01

Refrigeration Research 3212 Liquid Receiver Tank Assembly 6" x 8" 16 LBS,

,

Refrigeration Research 1921

Air conditioning, heat pump, truck refrigeration and many other applications require intermittent operation of the refrigeration compressor. Especially in remote applications, the suction line may trap or hold quantities of liquid which are suddenly dumped into the compressor as it starts up. This is frequently the cause of broken valves, pisTons, broken or bent connecting rods, blown gaskets and bearing washout. Proper installation of the Refrigeration Research suction accumulator in the suction line, just before the compressor, eliminates damage. If correctly sized, relatively large quantities of liquid refrigerant may return through the suction line and the suction accumulator prevents damage to the compressor. Liquid is temporarily held in the suction accumulator and metered back to the compressor along with any oil, at a controlled rate, through the metering orifice. Therefore, damage to the compressor is prevented and the compressor immediately and quietly goes to work.

,
,

Refrigeration Research 3212