Refrigeration Research 3738 Suction Accumulator 7/8" Vertical,
,

Refrigeration Research 3738

Refrigeration Research 3706 Suction Accumulator 1-3/8" Vertical,
,

Refrigeration Research 3706

Refrigeration Research 3703 Suction Accumulator 3/4" Vertical,
,

Refrigeration Research 3703

Refrigeration Research 3702 Suction Accumulator 5/8" Vertical,
,

Refrigeration Research 3702

Air conditioning, heat pump, truck refrigeration and many other applications require intermittent operation of the refrigeration compressor. Especially in remote applications, the suction line may trap or hold quantities of liquid which are suddenly dumped into the compressor as it starts up. This is frequently the cause of broken valves, pisTons, broken or bent connecting rods, blown gaskets and bearing washout. Proper installation of the Refrigeration Research suction accumulator in the suction line, just before the compressor, eliminates damage. If correctly sized, relatively large quantities of liquid refrigerant may return through the suction line and the suction accumulator prevents damage to the compressor. Liquid is temporarily held in the suction accumulator and metered back to the compressor along with any oil, at a controlled rate, through the metering orifice. Therefore, damage to the compressor is prevented and the compressor immediately and quietly goes to work.

,
,

Refrigeration Research 3700-01

Refrigeration Research 5315 Refrigeration Receiver, 6 lb Capacity, 3/8" SAE Inlet x 3/8" SAE Valve Outlet, 10" L x 5" Diameter

• Refrigeration research receivers have been made continuously for over 50 years
• They are used widely by original equipment manufacturers throughout the industry
• They are backed by a reputation for quality and service
• These receivers with valves and fittings attached are hydrogen brazed for cleanliness and pressure tested for reliability
• 430 deg F fusible plug is installed on all receivers except #2030, #2039, and #9028
• All valves are supplied with steel stem caps with copper gaskets and brass Flare nuts and caps, all receivers are powder coated for excellent corrosion resistance
• Pressure tested for 500 psi maximum working pressure

,
,

Refrigeration Research 5315 6 LB RECEIVER

Hoshizaki 435092-01 Drain Hose

Hoshizaki 435092-01

JB Industries SHLD-G4 Locking Refrigerant Cap 1/4" R22 4 PK

SHLD-G4

Everpure 3112-40 Buna-N O-Ring for E-10 and E-20 SRx Series Feeders

,
,

Everpure 3112-40

Temprite 62028000 Steel and Borosilicate Glass Standard Filter Kit, 14" L x 3-1/2" Diameter

Temprite 62028000

Make sure you ask for and use genuine Copleand parts. Copeland parts fit right, first time. Insisting on genuine Copeland parts will keep your refrigeration & A/C Compressor running reliably for the long haul

Copeland Parts 971-0329-04