Nu-Calgon 4207-47 Liquid ice machine cleaner is a 75% phosphoric acid of the highest food-grade quality. It is fast acting yet very safe to use and it does not give off any harsh fumes. Because of its 75% phosphoric acid content, it is the most concentrated ice machine cleaner in the market. It has a specific gravity of 1.63 and weighs 13.6 Lbs../Gallon. Usage rate is 8 fl oz. with three Gallons of water. The number one category of problems troubling an ice machine are water-related and the most frequently is lime scale. As the water is froz.en into ice during an ice maker's cycle, the naturally occurring dissolved minerals in the water, some of which can combine to form lime scale, remain behind in the unfrozen recirculating ice water simply because water tries to freeze in its pure state. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit. As the scale begins to form, it creates a physical obstruction that results in: plugged distribution holes, restricted water flow and eventually the ice maker will hang-up or jam. Ice harvest is reduced and eventually the machine will shut down, requiring service. This sequence of events can affect both Cubers and flakers. Some believe that flakers are free of scale problems since all of the water is made into ice. Not true. Flakers can scale-up as well, jamming the auger and eventually resulting in a broken belt or drive mechanism.

Nu-Calgon 4207-47

Nu-Calgon 4295-34 Pan Pads Condensate Pan Treatment, 3/4 oz., Light Brown Contents

• Integral part of the clean coil program
• Treats up to 5 Ton
• Control slime build-up, eliminating overflow of condensate pans
• Control the growth of harmful bacteria, including those causing legionnaire's disease
• Eliminate objectionable or musty odors caused by bacterial slime build-up
  
  

  Nu-Calgon 4295-34

Nu-Calgon 4299-T8 Pump Protector, 10 oz. Spray Can, Colorless Foam-in shut down corrosion protection for all types of pumps any pump that is shut down and drained part of the time should be safeguarded with aerosol pump protector. Pumps used in cooling towers, swimming pools and vacation homes, auxiliary pumps, marine and industrial pumps can develop corrosion deposits on the impeller and other close-tolerance areas during shut down, causing the pump to bind. Aerosol pump protector prevents this corrosion and lubricates the pump so that it starts right up every time! pump protector is water soluble and will not cause any foaming problem when the pump is started. If the pump is used for drinking water, flush it thoroughly by running water off a few minutes before placing the pump back in service. Protects seasonally operated pumps against corrosion during shutdowns by "winterizing" them. When corrosion occurs in close-tolerance areas, it can cause the impeller to stick or bind. Protect your clients investment and your reputation! Safe for all types of water pumps and it requires no special rinsing at start-up.

• Protects against corrosion and ends-pump impeller binding
• Convenient aerosol package
• Safe for all types of water pumps
• One can is enough for most pumps
• Requires no special rinsing at startup
• Protects pool pumps throughout the winter
• This product has been authorized by the USDA for use in federally inspected meat and poultry plants
• 95% volatile
• Level 1 heat of combustion
• 13 cm flame height, 4 - 5 sec flammability duration Foam-in shut down corrosion protection for all types of pumps any pump that is shut down and drained part of the time should be safeguarded with aerosol pump protector. Pumps used in cooling towers, swimming pools and vacation homes, auxiliary pumps, marine and industrial pumps can develop corrosion deposits on the impeller and other close-tolerance areas during shut down, causing the pump to bind. Aerosol pump protector prevents this corrosion and lubricates the pump so that it starts right up every time! pump protector is water soluble and will not cause any foaming problem when the pump is started. If the pump is used for drinking water, flush it thoroughly by running water off a few minutes before placing the pump back in service. Protects seasonally operated pumps against corrosion during shutdowns by "winterizing" them. When corrosion occurs in close-tolerance areas, it can cause the impeller to stick or bind. Protect your clients investment and your reputation! Safe for all types of water pumps and it requires no special rinsing at start-up.
  
  

  Nu-Calgon 4299-T8

Nu-Calgon 4167-05 Biodegradable Eco-Lyme Descaler 5 Gallon,

4167-05

Nu-Calgon 4188-02 Freez-Kontrl Propylene Glycol, 55 Gallon Drum, Light Blue Freez-Kontr'l is a formulation of propylene glycol, dipotassium phosphate corrosion inhibitor and de-ionized water. The fluid is colored blue to aid in leak detection. It has an operating temperature range from below -60 to 230 deg F and solutions in water provide freeze protection to below -60 deg F and burst protection to below -100 deg F. Freez-Kontr'l is nearly odorless and the product of choice when contact with potable water is possible. The ingredients used in its manufacture are GRAS (generally recognized as safe), under title 21, part 182 of the US code of Federal regulations, where accidental or incidental contact with potable water could occur.

• Provides greater than -60 deg F freeze protection and greater than -100 deg F burst protection
• Complete solubility in water
• 371 deg C auto-ignition temperature
• Formulated for chilled water, hydronic and other closed systems
• Fully inhibited to prevent corrosion
• Non-flammable
• Non-toxic
• Low in acute oral toxicity Freez-Kontr'l is a formulation of propylene glycol, dipotassium phosphate corrosion inhibitor and de-ionized water. The fluid is colored blue to aid in leak detection. It has an operating temperature range from below -60 to 230 deg F and solutions in water provide freeze protection to below -60 deg F and burst protection to below -100 deg F. Freez-Kontr'l is nearly odorless and the product of choice when contact with potable water is possible. The ingredients used in its manufacture are GRAS (generally recognized as safe), under title 21, part 182 of the US code of Federal regulations, where accidental or incidental contact with potable water could occur.
  
  

  4188-02

Nu-Calgon 4108-P2 No. 85 Algaecide, is a polymeric, cationic biocide that has been developed for controlling the growth of algae, bacteria, and fungi in recirculating water systems such as cooling towers, evaporative condensers, closed cooling water systems and industrial air-washing systems. Algae are microscopic plants that grow rapidly in cooling towers, spray ponds and other recirculating systems exposed to sunlight. These free-floating growths can be carried to the condenser or heat exchanger by the condenser or heat exchanger by the recirculating water where they lodge and act as binders for sludge and suspended matter. In addition, algae can contribute to the formation of slime deposits by providing organic matter necessary for the growth of bacteria. These biological growths restrict water flow, reduce heat transfer efficiency and increase head pressures, all of which result in lower efficiency and increased power and service costs. Treatment of recirculation water with No. 85 Algaecide prevents growths of algae and bacteria from developing to the point where they cause the problems described.

Controls the growth of algae, bacteria, and fungi in recirculating water systems
• Can be slug fed, drip fed or fed with a chemical solution pump
• Effective in both alkaline and acid waters
• Does not cause foam like most algaecides
• Non-volatile
  
  

  4108-P2

Nu-Calgon 4296-60 Pan-Treat condensate tablets control odors can prevent overflows by plugged condensate drain lines. They can also be used on humidifiers. Pan-Treat is extremely easy to use, and is safe, non-corrosive, non-toxic and biodegradable. The product is completely soluble in water and it does not form any deposits in the pan or drain. Left untreated, condensate pans can suffer from the build-up of sludge, scum and other accumulations. This build-up can cause odors as well as plugged drains and overflows, which in turn result in water damage. Pan-Treat is formulated with ingredients proven effective in cleaning and preventing these deposits, and its use will eliminate the extra maintenance costs associated with odors, plugged drains and overflows.

Controls odors
• Prevents overflows and water damage caused by plugged drain lines
• Easy to install tablets completely dissolve, nothing to remove
• Non-corrosive and non-toxic
• For use in humidifiers too
• 200 tablets per jar
  
  

  4296-60

Nu-Calgon 4084-75 Stainless Steel Cleaner, 15 oz. Can, Colorless

• Nu-Calgon's aerosol stainless steel cleaner removes light soil and restores shine to stainless steel, chrome and hard, washable surfaces
• Polishes and protects
• Removes light soil
• Restores shine and luster
• Oil-based cleaner
• Convenient aerosol spray
• Pleasant lemon scent
• Spray on a small area at a time and overlap cleaned areas, polishing to perfection
• 12" flame projection
• Flammability
• 37.89 kJ/g heat of combustion
• Not oxidizing properties
  
  

  4084-75

Nu-Calgon 4167-08 Eco-Lyme is a new odorless chemistry for the HVAC/R market that provides a unique blend of performance and safety to the environment and user. The product is specially formulated to achieve descaling behavior of competing hydrochloric acid based descalers. However, the active ingredient is substantially safer on equipment metals. Eco-Lyme is ideal for stainless steel construction - eliminates the issue of localized corrosion/pitting caused by repeated use of hydrochloric acid. Eco-Lyme is readily biodegradable per OECD 301A, a recognized international method for determining biodegradability for applicable chemistry. Eco-Lyme uniquely provides top-tier performance with a validated eco-profile when a 'green' descaler is sought.

Powerful environmentally friendly descaler
• New chemistry rapidly removes scale and rust - similar in performance to hydrochloric acid (also described as hydrogen chloride)
• Significantly safer on metals than competing hydrochloric acid based descalers
• Safe on carbon steel, aluminum, stainless steel and copper
• Readily biodegradable
• Odorless - making it safer to handle
• Low foaming chemistry for added safety
  
  

  Nu-Calgon 4167-08

Nu-Calgon 4188-05 Freez-Kontr'l is a formulation of propylene glycol, dipotassium phosphate corrosion inhibitor and de-ionized water. The fluid is colored blue to aid in leak detection. It has an operating temperature range from below -60 to 230 deg F and solutions in water provide freeze protection to below -60 deg F and burst protection to below -100 deg F. Freez-Kontr'l is nearly odorless and the product of choice when contact with potable water is possible. The ingredients used in its manufacture are GRAS (generally recognized as safe), under Title 21, Part 182 of the US Code of Federal Regulations, where accidental or incidental contact with potable water could occur.

Optimum freeze or burst protection
• Fully inhibited to prevent corrosion
• Non-flammable
• Uses renewable resourced propylene glycol
• Low in acute oral toxicity
• Colored blue for easy leak detection
• The complete heat transfer fluid and antifreeze
  
  

  Nu-Calgon 4188-05

Nu-Calgon 4287-34 Nickel-Safe ice machine cleaner is a specially formulated citric/phosphoric food-grade product for removing scale deposits from ice makers having nickel-plated or tin-plated evaporators. It is acceptable for use in machines made by Manitowoc and other manufacturers using nickel. In fact, it was the industry's first nickel-safe product, introduced in collaboration with Manitowoc. Usage rate should be in accordance with the manufacturers instructions or 16 fl oz. with 3 Gallon of system water. The number one category of problems troubling an ice machine are water-related and the most frequently is lime scale. As the water is froz.en into ice during an ice maker's cycle, the naturally occurring dissolved minerals in the water, some of which can combine to form lime scale, remain behind in the unfrozen recirculating ice water simply because water tries to freeze in its pure state. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit. As the scale begins to form, it creates a physical obstruction that results in: plugged distribution holes, restricted water flow and eventually the ice maker will hang-up or jam. Ice harvest is reduced and eventually the machine will shut down, requiring service. This sequence of events can affect both Cubers and flakers. Some believe that flakers are free of scale problems since all of the water is made into ice. Not true. Flakers can scale-up as well, jamming the auger and eventually resulting in a broken belt or drive mechanism.

Nickel-safe ice machine cleaner is a specially formulated food-grade product
• Complete family of liquid ice machine cleaners
• Formulated for use in all makes and models of ice makers including those with nickel and tin plated evaporators
• Functional in Cubers, flakers, drum and tube machines
  
  

  Nu-Calgon 4287-34

Nu-Calgon 4165-24 Drain Solve Drain Opener, 1 qt Bottle, Odorless, Clear, Drain Solve is an alkaline-based drain opener which removes grease, hair, vegetable and other organic matter. It is non-fuming and it will clean and clear drains quickly. Simply pour it down the drain and let it work without fear of noxious fumes or reactions that may squirt corrosive chemicals into face and eyes. This product is NSF registered.

Nu-Calgon 4165-24