Packless vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping. Packless vibration absorbers are recognized under the component programs of Underwriter's Laboratories for application on both suction and discharge lines. Packless vibration absorbers are compatible with all HFC, HCFC and CFC refrigerants. Packless vibration absorbers are constructed of deep pitch corrugated tubing for increased flexibility and vibration absorption, covered by high tensile wire braid for superior strength. The vibration absorbers have female copper end connections for making sweat connections to refrigerant piping. Each vibration absorber is pressure tested and then carefully VAC uum tested using a highly sensitive helium mass spectrometer leak detection device. Units are cleaned, dehydrated and sealed in plastic film after final inspection to maintain cleanliness and dryness prior to installation. These are available either in bulk or individually boxed. Packless can customize the length and type of end connection for the vibration absorber to meet the individual needs of your application.

• The Packless VAFS line of improved vibration absorbers are electrically welded with no braze joints for improved strength and reliability and designed for use with modern high pressure refrigerants
• 3/4"

,
,

Cello WP02-08-04

Packless vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping. Packless vibration absorbers are recognized under the component programs of Underwriter's Laboratories for application on both suction and discharge lines. Packless vibration absorbers are compatible with all HFC, HCFC and CFC refrigerants. Packless vibration absorbers are constructed of deep pitch corrugated tubing for increased flexibility and vibration absorption, covered by high tensile wire braid for superior strength. The vibration absorbers have female copper end connections for making sweat connections to refrigerant piping. Each vibration absorber is pressure tested and then carefully VAC uum tested using a highly sensitive helium mass spectrometer leak detection device. Units are cleaned, dehydrated and sealed in plastic film after final inspection to maintain cleanliness and dryness prior to installation. These are available either in bulk or individually boxed. Packless can customize the length and type of end connection for the vibration absorber to meet the individual needs of your application.

• The Packless VAFS line of improved vibration absorbers are electrically welded with no braze joints for improved strength and reliability and designed for use with modern high pressure refrigerants
• 5/8"

,
,

Cello WP02-06-04

Packless vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping. Packless vibration absorbers are recognized under the component programs of Underwriter's Laboratories for application on both suction and discharge lines. Packless vibration absorbers are compatible with all HFC, HCFC and CFC refrigerants. Packless vibration absorbers are constructed of deep pitch corrugated tubing for increased flexibility and vibration absorption, covered by high tensile wire braid for superior strength. The vibration absorbers have female copper end connections for making sweat connections to refrigerant piping. Each vibration absorber is pressure tested and then carefully VAC uum tested using a highly sensitive helium mass spectrometer leak detection device. Units are cleaned, dehydrated and sealed in plastic film after final inspection to maintain cleanliness and dryness prior to installation. These are available either in bulk or individually boxed. Packless can customize the length and type of end connection for the vibration absorber to meet the individual needs of your application.

• The Packless VAFS line of improved vibration absorbers are electrically welded with no braze joints for improved strength and reliability and designed for use with modern high pressure refrigerants
• 1/2"

,
,

Cello WP02-04-02

ltraLite is a true concrete equipment pad at the weight of plastic (about 2.5 lbs. per square foot). UltraLite is strengthened by miles of fiber in each square foot of fiber-cement coating. This fiber allows the pad to flex instead of cracking or breaking. The textured surface prevents the condensing unit or portable generator from sliding, and allows water drainage, while the engineered encapsulated polystyrene (EPS) core prevents warping and provides a solid bottom to resist settling. UltraLite is unaffected by soil conditions, ultraviolet (UV) light, temperature extremes, and other weather conditions.
DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensate drain line are fastened in place. The cover then snaps simply on top of the base. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi-Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.

Diversitech U3353-3

Emerson Flow TXVs are designed for a wide range of air conditioning, refrigeration, heat pump, and chiller applications. Emerson uses stainless steel power elements that are unsusceptible to corrosion. We offer products with conventional, as well as balanced ported designs that are advantageous when applied to systems with large load variations and/or floating head applications. Emerson also manufactures bi-flow designs for use in heat pumps and many of our TXVs have a take-apart design for ease of service. Emerson thermal expansion valves cover a wide range of nominal capacity, from 1/2 - 100 Ton.

White Rodgers Cooling Controls V11-301 Solenoid Coil 24 VDC Used On All White Rodgers Solenoid Valves With

V11-301

Danfoss Straightway Version, TX Valve TUA 3/8" x 1/2" Internal Equalizer R134A

• Interchangeable orifice assembly designed for-easy mounting, optimized tightness
• Bi-metal connections-simple, fast soldering without the need for wet cloth or refrigeration pliers
• Stable regulation
• Bi-flow function (orifice 1 - 8)
• Compact design small dimensions and low weight
• Stainless steel, solder version-high connection strength and tightness, capillary tube joints of high strength and vibration resistance
• Laser welded, stainless steel thermostatic diaphragm element-optimum function, long diaphragm life, high pressure resistance
• Stainless steel bulb simple and fast installation, good heat transfer from pipe to bulb
• Adjustable superheat setting, adjustable in operation
• Interchangeable filter for easy cleaning
• 5 k static superheat
• Bi-metal steel/copper connection

,
,

Danfoss 068U1036

Danfoss Straightway Version, TX Valve TUA 3/8" x 1/2" Internal Equalizer

• R-22/R-407C
  
  • Interchangeable orifice assembly designed for-easy mounting, optimized tightness
  • Bi-metal connections-simple, fast soldering without the need for wet cloth or refrigeration pliers
  • Stable regulation
  • Bi-flow function (orifice 1 - 8)
  • Compact design small dimensions and low weight
  • Stainless steel, solder version-high connection strength and tightness, capillary tube joints of high strength and vibration resistance
  • Laser welded, stainless steel thermostatic diaphragm element-optimum function, long diaphragm life, high pressure resistance
  • Stainless steel bulb simple and fast installation, good heat transfer from pipe to bulb
  • Adjustable superheat setting, adjustable in operation
  • Interchangeable filter for easy cleaning
  • 5 k static superheat
  • Bi-metal steel/copper connection
  
  ,
  ,
  
  
  
  

  Danfoss 068U2205

Danfoss offers a complete and Flexible range of solenoid valves for use in refrigeration and A/C systems. EVR solenoid valves are direct or servo-operated solenoid valves for liquid, suction and hot gas lines. They are suitable for all refrigeration, freezing and air conditioning applications and are compatible with fluorinated refrigerants. Versions for high-pressure refrigerants are available by contacting Danfoss. The valves can be delivered as normally open or closed as well as with or without manual operation.
Danfoss Orifice # 4 For TUA/TUAE For Expansion Valve
R-22 .70 Tons R404A .59 Tons R134A .45 Tons,
,

Danfoss 068-2015

White Rodgers Cooling Controls 054939 Expansion Valve 2 Ton R22/R407C Medimum Temp 3/8" x 1/2" Flare

Sporlan FFE-1/4-C

Kason 1094000002 Door Closer W/Hook 1-1/8" Off-Set,

Packless Industries VAFS-11

White Rodgers Cooling Controls refrigeration solenoid valves have the lowest External leakage rates in the industry are less susceptible to scoring, don't hold residual magnetism, and provide trouble-free operation due to their fail-safe design.

• 1-coil fits all valve sizes
• Copper extended ends for easy installation (standard)
• Longlife molded coils
• PTFE O-ring for superior External sealing
  
• Port Size: 1/8"
• Connection Size: 1/4" OD
• R12 Capacity: 2.0
• R22 Capacity: 3.1
• R404A Capacity: 2.0,

  White Rodgers Cooling Controls 1840061