Packless vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping. Packless vibration absorbers are recognized under the component programs of Underwriter's Laboratories for application on both suction and discharge lines. Packless vibration absorbers are compatible with all HFC, HCFC and CFC refrigerants. Packless vibration absorbers are constructed of deep pitch corrugated tubing for increased flexibility and vibration absorption, covered by high tensile wire braid for superior strength. The vibration absorbers have female copper end connections for making sweat connections to refrigerant piping. Each vibration absorber is pressure tested and then carefully VAC uum tested using a highly sensitive helium mass spectrometer leak detection device. Units are cleaned, dehydrated and sealed in plastic film after final inspection to maintain cleanliness and dryness prior to installation. These are available either in bulk or individually boxed. Packless can customize the length and type of end connection for the vibration absorber to meet the individual needs of your application.

• The Packless VAFS line of improved vibration absorbers are electrically welded with no braze joints for improved strength and reliability and designed for use with modern high pressure refrigerants
• 3/4"

,
,

Packless Industries VAFS-6

Packless vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping. Packless vibration absorbers are recognized under the component programs of Underwriter's Laboratories for application on both suction and discharge lines. Packless vibration absorbers are compatible with all HFC, HCFC and CFC refrigerants. Packless vibration absorbers are constructed of deep pitch corrugated tubing for increased flexibility and vibration absorption, covered by high tensile wire braid for superior strength. The vibration absorbers have female copper end connections for making sweat connections to refrigerant piping. Each vibration absorber is pressure tested and then carefully VAC uum tested using a highly sensitive helium mass spectrometer leak detection device. Units are cleaned, dehydrated and sealed in plastic film after final inspection to maintain cleanliness and dryness prior to installation. These are available either in bulk or individually boxed. Packless can customize the length and type of end connection for the vibration absorber to meet the individual needs of your application.

• The Packless VAFS line of improved vibration absorbers are electrically welded with no braze joints for improved strength and reliability and designed for use with modern high pressure refrigerants
• 5/8"

,
,

Packless Industries VAFS-5

Packless vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping. Packless vibration absorbers are recognized under the component programs of Underwriter's Laboratories for application on both suction and discharge lines. Packless vibration absorbers are compatible with all HFC, HCFC and CFC refrigerants. Packless vibration absorbers are constructed of deep pitch corrugated tubing for increased flexibility and vibration absorption, covered by high tensile wire braid for superior strength. The vibration absorbers have female copper end connections for making sweat connections to refrigerant piping. Each vibration absorber is pressure tested and then carefully VAC uum tested using a highly sensitive helium mass spectrometer leak detection device. Units are cleaned, dehydrated and sealed in plastic film after final inspection to maintain cleanliness and dryness prior to installation. These are available either in bulk or individually boxed. Packless can customize the length and type of end connection for the vibration absorber to meet the individual needs of your application.

• The Packless VAFS line of improved vibration absorbers are electrically welded with no braze joints for improved strength and reliability and designed for use with modern high pressure refrigerants
• 1/2"

,
,

Packless Industries VAFS-4

Plastic Plug End Dual Element Non-Indicating Rejecting Time Delay Fuse, 12

Robertshaw V2-408060-170

Emerson Flow TXVs are designed for a wide range of air conditioning, refrigeration, heat pump, and chiller applications. Emerson uses stainless steel power elements that are unsusceptible to corrosion. We offer products with conventional, as well as balanced ported designs that are advantageous when applied to systems with large load variations and/or floating head applications. Emerson also manufactures bi-flow designs for use in heat pumps and many of our TXVs have a take-apart design for ease of service. Emerson thermal expansion valves cover a wide range of nominal capacity, from 1/2 - 100 Ton.

White Rodgers Cooling Controls V11-301 Solenoid Coil 24 VDC Used On All White Rodgers Solenoid Valves With

V11-301

RectorSeal WBB-300SS Condenser Wall Bracket

• 300 Lbs Stainless,
  

  RectorSeal WBB-300SS

Danfoss Straightway Version, TX Valve TUA 3/8" x 1/2" Internal Equalizer R134A

• Interchangeable orifice assembly designed for-easy mounting, optimized tightness
• Bi-metal connections-simple, fast soldering without the need for wet cloth or refrigeration pliers
• Stable regulation
• Bi-flow function (orifice 1 - 8)
• Compact design small dimensions and low weight
• Stainless steel, solder version-high connection strength and tightness, capillary tube joints of high strength and vibration resistance
• Laser welded, stainless steel thermostatic diaphragm element-optimum function, long diaphragm life, high pressure resistance
• Stainless steel bulb simple and fast installation, good heat transfer from pipe to bulb
• Adjustable superheat setting, adjustable in operation
• Interchangeable filter for easy cleaning
• 5 k static superheat
• Bi-metal steel/copper connection

,
,

Danfoss 068U2205

Danfoss Straightway Version, TX Valve TUA 3/8" x 1/2" Internal Equalizer

• R-22/R-407C
  
  • Interchangeable orifice assembly designed for-easy mounting, optimized tightness
  • Bi-metal connections-simple, fast soldering without the need for wet cloth or refrigeration pliers
  • Stable regulation
  • Bi-flow function (orifice 1 - 8)
  • Compact design small dimensions and low weight
  • Stainless steel, solder version-high connection strength and tightness, capillary tube joints of high strength and vibration resistance
  • Laser welded, stainless steel thermostatic diaphragm element-optimum function, long diaphragm life, high pressure resistance
  • Stainless steel bulb simple and fast installation, good heat transfer from pipe to bulb
  • Adjustable superheat setting, adjustable in operation
  • Interchangeable filter for easy cleaning
  • 5 k static superheat
  • Bi-metal steel/copper connection
  
  ,
  ,
  

  Danfoss 068U2235

Danfoss offers a complete and Flexible range of solenoid valves for use in refrigeration and A/C systems. EVR solenoid valves are direct or servo-operated solenoid valves for liquid, suction and hot gas lines. They are suitable for all refrigeration, freezing and air conditioning applications and are compatible with fluorinated refrigerants. Versions for high-pressure refrigerants are available by contacting Danfoss. The valves can be delivered as normally open or closed as well as with or without manual operation.
Danfoss Orifice # 4 For TUA/TUAE For Expansion Valve
R-22 .70 Tons R404A .59 Tons R134A .45 Tons,
,

Danfoss 068U1034

White Rodgers Cooling Controls 054939 Expansion Valve 2 Ton R22/R407C Medimum Temp 3/8" x 1/2" Flare

White Rodgers Cooling Controls 054939

Kason 1094000002 Door Closer W/Hook 1-1/8" Off-Set,

Kason 1094000002