HPR-EXT is a 4 in. gray heat pump riser extension that can be added to either the HPR-3-2P or HPR-6-2P. This provides the flexibility to quickly and easily add another 4 in. rise to these products if conditions require. It is designed to insert easily and securely into the HPR-3-2P or HPR-6-2P, no tools or hardware required.

HPR-EXT

,

HPR-EXT

Diversitech HPR-6 1-Piece Heat Pump Riser
DiversiTech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The one-piece, heavy-duty plastic unit is manufactured in three heights. Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise. Available in 1 or 2 piece risers. Four risers can handle up to 2,000 lb uniform load.,

HPR-6

Diversitech

HPR-6-2P

Heat Pump Riser

6"

Heat Pump & Air Handler Polypropylene Gray Provides

Diversitech

HPR-6-2PG

Heat Pump Riser

6"

Heat Pump & Air Handler Polypropylene Gray Provides

Diversitech HP3232-8 Heat Pump Riser Pad 32" L x 32" W x 8" H for Use With Heat Pump Equipment
Provides an effective base for heat pump equipment installed in snowy climates. Rather than a combination of a typical 2" (or 3") equipment pad and 6in. Heat pump risers, the Heat Pump Pad provides a full 8" of elevation in a simple square footprint. The star pattern of the integral risers allows for installation of equipment with different size footprints up to 36 x 36". Also included are eight anti-vibration pads uniquely designed to fit into the guide slots on the top of the integral risers. The base is sloped outward to allow for easy drainage of condensate or defrost cycle condensate when the outdoor coil is operating in heat pump mode. Nestable for efficient shipping, transportation, and warehousing. Injection molded from concrete gray, recycled polypropylene material, the Heat Pump Pad is environmentally friendly and designed to last longer than the equipment it supports. US Patent Number 7,891,635, and other patent(s) pending.

,

HP3232-8

,

HP3232-8

Diversitech HP3636-8 Heat Pump Riser Pad 36" L x 36" W x 8" H for Use With Heat Pump Equipment
Provides an effective base for heat pump equipment installed in snowy climates. Rather than a combination of a typical 2" (or 3") equipment pad and 6in. Heat pump risers, the Heat Pump Pad provides a full 8" of elevation in a simple square footprint. The star pattern of the integral risers allows for installation of equipment with different size footprints up to 36 x 36". Also included are eight anti-vibration pads uniquely designed to fit into the guide slots on the top of the integral risers. The base is sloped outward to allow for easy drainage of condensate or defrost cycle condensate when the outdoor coil is operating in heat pump mode. Nestable for efficient shipping, transportation, and warehousing. Injection molded from concrete gray, recycled polypropylene material, the Heat Pump Pad is environmentally friendly and designed to last longer than the equipment it supports. US Patent Number 7,891,635, and other patent(s) pending.

,

HP3636-8

,

HP3636-8

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

• 2" x 2" x 3/8"
• Has a solid cross-ribbed design (3/8" thick)
• Made from high quality elastomeric materials
• Compounded for excellent resistance to aging, compression set & oil
• Recommended maximum loading capacity: 50 lbs per square in,
  
  

  6732 BRAMEC

  ,
  

  6732 BRAMEC

Diversitech QSMS1203 Mini-Split Double Stack Stand

• Fits All Mini Split
• 12 Points of anti-vibration isolation
• Total Max weight 400 lbs on the bottom - 200 lbs on top
• Each foot is 6"x6" 11 gauge steel and is adjustable up to 1.25" in height.
• Powder Coated for long lasting outdoor use
• All necessary hardware included,
  
  

  QSMS1203

  ,
  

  QSMS1203

Supreme Stands MIN1832 Mini-Split Heat Pump Stand

MIN1832

Diversitech QSMS1200 Mini-Split Stand

14 gauge square steel tubing

Fits all mini-split brands on the market

6" x 6" w/ 3/8" slotted feet

Adjustable in height up to 1.25"

50 durometer pads on each foot

Max capacity 400 lbs

4 points of anti-vibration isolation washers

Adjustable footprint from 34" to 40" in 1" increments

Available in Stainless Steel (QSMS1201-SS),

Diversitech QSMS1200

,

QSMS1200

Diversitech QSMS1201 Mini-Split Stand

• 14 gauge square steel tubing
• Fits all mini-split brands on the market
• 6" x 6" w/ 3/8" slotted feet
• Adjustable in height up to 1.25"
• 50 durometer pads on each foot
• Max capacity 400 lbs
• 4 points of anti-vibration isolation washers
• Adjustable footprint from 34" to 40" in 1" increments
• Available in Stainless Steel (QSMS1201-SS,
  
  

  QSMS1201

  ,
  

  QSMS1201

Diversitech QSMS1801 Mini-Split Stand

• 14 gauge square steel tubing
• Fits all mini split brands on the market
• 6" x 6" w/ 3/8" slotted feet
• Adjustable in height up to 1.25"
• 50 derometer pads on each foot
• Max capacity 400 lbs
• 4 points of anti-vibration isolation washers
• Adjustable footprint from 34" to 40" in 1" increments
• 2 additional support arms included
• Available in Stainless Steel (QSMS1801-SS,
  
  

  QSMS1801

  ,
  

  QSMS1801