S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsBrand Name
Part Type
Length
Width
Height
Diversitech U4054-3 Ultralite Equipment Pad 40" x 53" x 3 " H Fiber Reinforced Cement Pad
U4054-3
Item#:
U4054-3
Manufacturer Item:
U4054-3
Manufacturer:
DIVERSITECH CORP.
Diversitech UC2442-3 Ultralite Equipment Pad
- 42" x 24" x 3" H Fiber Reinforced Cement Pad
Product Features & Benefits
- Extremely lightweight, the UltraLite® pad is a concrete pad at the weight of plastic, about 2.5 lbs. per square foot
- Concrete outer skin and EPS foam core provide flexibility and vibration dampening
- Flat bottom design provides excellent resistance to sinking and settling
- The textured surface of the UltraLite® prevents equipment sliding and allows water drainage
- Extensive selection of sizes available including wedge-shaped pad
- Drillable for securing unit (¼ x 1-¼" Tapcon® recommended), either side or top surface
- Freeze/thaw, UV, chemical & flame-resistant for long-term life outdoors
- Tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution
- Resistant to heating caused by the compressor and the surface is resistant to heat from incidental torch flame during installation,
UC2442-3
,UC2442-3
Item#:
UC2442-3
Manufacturer Item:
UC2442-3
Manufacturer:
DIVERSITECH CORP.
Diversitech UC2448-3 Ultralite Equipment Pad 48" x 24" x 3" H Fiber Reinforced Cement Pad
UC2448-3
Item#:
UC2448-3
Manufacturer Item:
UC2448-3
Manufacturer:
DIVERSITECH CORP.
ltraLite® is a true concrete equipment pad at the weight of plastic (about 2.5 lbs. per square foot). UltraLite® is strengthened by miles of fiber in each square foot of fiber-cement coating. This fiber allows the pad to flex instead of cracking or breaking. The textured surface prevents the condensing unit or portable generator from sliding, and allows water drainage, while the engineered encapsulated polystyrene (EPS) core prevents warping and provides a solid bottom to resist settling. UltraLite® is unaffected by soil conditions, ultraviolet (UV) light, temperature extremes, and other weather conditions.
DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensate drain line are fastened in place. The cover then snaps simply on top of the base. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi-Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.
DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensate drain line are fastened in place. The cover then snaps simply on top of the base. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi-Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.
U5053-3
Diversitech CladLite equipment pads provide the strength and durability customers demand in an easy to install pad. CladLite pads are to up 80% lighter than solid concrete but still provide rock solidsupport for equipment. Once its set, so are you. CladLite pads stay in place and can withstand anything mother nature can throw at them. These pads provide superior resistance to sun, moisture, and freeze-thaw conditions. And the vibration dampening EPS foam core is unaffected by water, soil, fungus or bacteria. The 3" thick CladLite pad is the choice for equipment pads when required by the local building code.
- 80% lighter than solid concrete
- Continuous steel reinforcement
- Full foam bottom resists settling and vibration
- Impervious to weather
- 30" x 30" x 3"
30X30X3
,30X30X3
Item#:
30X30X3
Manufacturer Item:
UC3030-3
Manufacturer:
CONDENSER PADS
Mitco P4-4 Furnace Block Corner Peel & Stick
Item#:
P4-4
Manufacturer Item:
P4-4
Manufacturer:
MITCO MFG.
Mitco P4-48 Furnace Block Corner Peel & Stick 8" x 8" x 4"
Item#:
P4-48
Manufacturer Item:
P4-48
Manufacturer:
MITCO MFG.
MA-Line MA-68150 Furnace Mounting Block, 5-1/2" L x 2-1/4" H x 4" D
- ,
MA-68150
,MA-68150
Item#:
MA-68150
Manufacturer Item:
MA-68150
Manufacturer:
MONTI & ASSOCIATES INC
Diversitech QSTD3000 Heat Pump Quick Stand
- 14 gauge square steel tubing
- 6" x 6" w/ 3/8" slotted feet
- 12" or 18" fixed height
- Adjustable in height up to 1.25"
- 400 lbs Max Capacity
- (4) 3/8" holes allow the stand to be bolted to any surface for security and stability.
- 2 multi-position clips are provided for mounting the unit to the stand.
- Includes 4 arms, 2 for mounting the unit and 2 for stabilization.
- Adjustable in 2 dimensions: Width 24" x 38" Length 30" to 48",
Diversitech QSTD3000
,QSTD3000
Diversitech HPR-12 Heat Pump Riser 12" Gray
HPR-12
Item#:
HPR-12
Manufacturer Item:
HPR-12
Manufacturer:
DIVERSITECH CORP.
Diversitech HPR-3-2PG Heat Pump Riser 2 Piece 3" Black
HPR-3-2PG
Item#:
HPR-3-2PG
Manufacturer Item:
HPR-3-2PG
Manufacturer:
DIVERSITECH CORP.
Diversitech HPR-3 1-Piece Heat Pump Riser
DiversiTech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The one-piece, heavy-duty plastic unit is manufactured in three heights. Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise. Available in 1 or 2 piece risers. Four risers can handle up to 2,000 lb uniform load.,
DiversiTech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The one-piece, heavy-duty plastic unit is manufactured in three heights. Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise. Available in 1 or 2 piece risers. Four risers can handle up to 2,000 lb uniform load.,