|◀ ◀ 481 - 492 of 1407 ▶ ▶|
View:

Cushion Clamp 7/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    UX7810

    • Item#:
    UX7810
    Manufacturer Item:
    UX7810-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX7810_Broc

    Cushion Clamp 1-1/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    Peerless Boiler WBV-E-03-WPCTL

    • Item#:
    UX11810
    Manufacturer Item:
    UX11810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX11810_Broc

    Cushion Clamp 1-3/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    Systemair WC15

    • Item#:
    UX13810
    Manufacturer Item:
    UX13810-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX13810_Broc

    Cushion Clamp 7/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    Westinghouse WHP07WMA21S

    • Item#:
    UX7834
    Manufacturer Item:
    UX7834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX7834_Broc

    Self-Adhering Foam Insulation Tape 1" x 82' 24 Mil

    Tube and Sheet Insulation is a highly flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation

    TPPR06025025

    Item#:
    TPPR06025025
    Manufacturer Item:
    933-TPPR06025025
    Manufacturer:
    AEROFLEX USA ,INC
     
    Aeroflex-Tape-Broc

    Elbow 90 Degree 1/2" x 3/4" White Expanded Elastomer

    Armacell
  • Black and White Tube Insulation
  • The original, fiber-free, flexible elastomeric pipe insulation for reliable protection against condensation and energy loss.
  • Fiber-free, formaldehyde-free, low VOC and non-particulating formulation protects indoor air quality
  • Closed-cell structure provides excellent condensation control
  • Built-in vapor barrier eliminates need for additional vapor retarder

    Armacell APF01234EL3W

    • Item#:
    APF01234EL3W
    Manufacturer Item:
    APF01234EL3W
    Manufacturer:
    INSULTUBE
     
    Armaflex-Fitting_Spec

    Single White Insulated Refrigerant Line 1/4" x 50' Tear-Resistant

  • Consistent copper, consistent insulation. Our quality never varies.
  • Super-clean inner surface  safe for any application.
  • 99.9% virgin copper. No scrap. No impurities. No corrosion. Longer service life.
  • State of the art machinery assures precision tubes. Less kinks. Better flares.
  • Incised and engraved on every tube we make.
  • Coils pack flat on a 4-way pallet. Safe shipping. Easy storage.
  • Quality control inspection and signature on every carton.
  • Zero gap between insulation and tube = REAL R-value!

    RL-1/4X50

    • Item#:
    RL-1/4X50
    Manufacturer Item:
    C110-U28-050A-01101
    Manufacturer:
    PTUBES INC
     
    RL-Tubing_Broc
    RL-Tubing_Spec

    Single White Insulated Refrigerant Line 1/2" x 50' Tear-Resistant

  • Consistent copper, consistent insulation. Our quality never varies.
  • Super-clean inner surface  safe for any application.
  • 99.9% virgin copper. No scrap. No impurities. No corrosion. Longer service life.
  • State of the art machinery assures precision tubes. Less kinks. Better flares.
  • Incised and engraved on every tube we make.
  • Coils pack flat on a 4-way pallet. Safe shipping. Easy storage.
  • Quality control inspection and signature on every carton.
  • Zero gap between insulation and tube = REAL R-value!

    RL-1/2X50

    • Item#:
    RL-1/2X50
    Manufacturer Item:
    C110-U48-050A-01103
    Manufacturer:
    PTUBES INC
     
    RL-Tubing_Broc
    RL-Tubing_Spec

    Single White Insulated Refrigerant Line 5/8" x 50' Tear-Resistant

  • Consistent copper, consistent insulation. Our quality never varies.
  • Super-clean inner surface  safe for any application.
  • 99.9% virgin copper. No scrap. No impurities. No corrosion. Longer service life.
  • State of the art machinery assures precision tubes. Less kinks. Better flares.
  • Incised and engraved on every tube we make.
  • Coils pack flat on a 4-way pallet. Safe shipping. Easy storage.
  • Quality control inspection and signature on every carton.
  • Zero gap between insulation and tube = REAL R-value!

    RL-5/8X50

    • Item#:
    RL-5/8X50
    Manufacturer Item:
    C110-U58-050A-01104
    Manufacturer:
    PTUBES INC
     
    RL-Tubing_Broc
    RL-Tubing_Spec

    Single White Insulated Refrigerant Line 3/8" x 50' Tear-Resistant

  • Consistent copper, consistent insulation. Our quality never varies.
  • Super-clean inner surface  safe for any application.
  • 99.9% virgin copper. No scrap. No impurities. No corrosion. Longer service life.
  • State of the art machinery assures precision tubes. Less kinks. Better flares.
  • Incised and engraved on every tube we make.
  • Coils pack flat on a 4-way pallet. Safe shipping. Easy storage.
  • Quality control inspection and signature on every carton.
  • Zero gap between insulation and tube = REAL R-value!

    RL-3/8X50

    • Item#:
    RL-3/8X50
    Manufacturer Item:
    C110-U38-050A-01102
    Manufacturer:
    PTUBES INC
     
    RL-Tubing_Broc
    RL-Tubing_Spec

    Self-Adhering Foam Insulation Tape 2" x 82' 24 Mil

    Tube and Sheet Insulation is a highly flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation

    TPPR06050025

    Item#:
    TPPR06050025
    Manufacturer Item:
    934V-TPPR06050025
    Manufacturer:
    AEROFLEX USA ,INC
     
    Aeroflex-Tape-Broc

    Self-Adhering Foam Insulation Tape 4" x 82' 24 Mil

    Tube and Sheet Insulation is a highly flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation

    TPPRV0610025

    Item#:
    TPPRV0610025
    Manufacturer Item:
    954-TPPRV0610025
    Manufacturer:
    AEROFLEX USA ,INC
     
    Aeroflex-Tape-Broc
    |◀ ◀ 481 - 492 of 1407 ▶ ▶|
    View: