|◀ ◀ 469 - 480 of 1407 ▶ ▶|
View:

PVC Pipe 1/2" x 10' SCH 40 Easy to Install, better sound deadening Qualities than PVC Schedule 40 DWV

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry


6085


6085

Item#:
6085
Manufacturer Item:
6085
Manufacturer:
BRAMEC CORP
 
6085_Spec

Cushion Clamp 3/4" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    UX3410

    • Item#:
    UX3410
    Manufacturer Item:
    UX3410
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX3410_Broc

    Cushion Clamp 3/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    UX3810

    • Item#:
    UX3810
    Manufacturer Item:
    UX3810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX3810_Broc

    Cushion Clamp 5/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    Warren Technology WHE1002BX

    • Item#:
    UX5810
    Manufacturer Item:
    UX5810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX5810_Broc

    Cushion Clamp 1/2" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    peerless boiler wbv-e-04-wpcl

    • Item#:
    UX1210
    Manufacturer Item:
    UX1210
    Manufacturer:
    MILWAUKEE ELECTRIC TOOL CORP.
     
    UX1210_Broc

    Elbow 90 Degree Long Radius Cover 3/4" X 3/4" An innovative solution to insulating pipe bends and intersection

    K-flex 801LRE068048 K-Flex Black Long Radius 90 Degree Elbow Cover 1/2" x 3/4"
    Item#:
    801LRE068048
    Manufacturer Item:
    801-LRE-068048
    Manufacturer:
    K-FLEX USA LLC
     
    K-Flex_Broc

    Hydra-Zorb Klo-Shure 724112 Zinc Dichromate Mild Steel Clamp Insulated

    Klo-Shure 724112 Hydra-Zorb Klo-Shure 724112 Zinc Dichromate Mild Steel Clamp Insulated

    724112

    Item#:
    724112
    Manufacturer Item:
    724112
    Manufacturer:
    HYDRA-ZORB COMPANY
     
    724112_Spec

    Cushion Clamp 1-5/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    Warren Technology WHE0502BX

    • Item#:
    UX15834
    Manufacturer Item:
    UX15834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX15834_Broc

    Cushion Clamp 1-3/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    UX13834

    • Item#:
    UX13834
    Manufacturer Item:
    UX13834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX13834_Broc

    Cushion Clamp 5/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    Warren Technology WHE1002X

    • Item#:
    UX5834
    Manufacturer Item:
    UX5834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX5834_Broc

    Cushion Clamp 1/2" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    UX1234

    • Item#:
    UX1234
    Manufacturer Item:
    UX1234-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX1234_Broc

    Cushion Clamp 1-1/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    Peerless Boiler WBV-E-04-W

    • Item#:
    UX11834
    Manufacturer Item:
    UX11834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX11834_Broc
    |◀ ◀ 469 - 480 of 1407 ▶ ▶|
    View: