Home  > BHC RESIDENTIAL AND LIGHT COMM(x)
|◀ ◀ 13 - 24 of 60 ▶ ▶|
View:

Air Handler Multi-Position 230/1 5 Ton R454B TXV ECM

Features
  • Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation
  • Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application
  • Designed for easy installation and service
  • A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion. A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

    York JHE60C5CH2SS1

    • Item#:
    JHE60C5CH2SS1
    Manufacturer Item:
    JHE60C5CH2SS1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Modular Blower 1200 CFM 17.5" W ECM Motor

  • Features Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application.
  • Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

    York JME12B2SN1

    • Item#:
    JME12B2SN1
    Manufacturer Item:
    JME12B2SN1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Modular Blower 800 CFM 17.5"W

  • Features Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application.
  • Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

    York JME08B2SN1

    • Item#:
    JME08B2SN1
    Manufacturer Item:
    JME08B2SN1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Modular Blower 1800 CFM 24.5" W ECM Motor

  • Features Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application.
  • Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

    York JME18D2SN1

    • Item#:
    JME18D2SN1
    Manufacturer Item:
    JME18D2SN1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Modular Blower 1600 CFM 21" W ECM Motor

  • Features Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application.
  • Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

    York JME16C2SN1

    • Item#:
    JME16C2SN1
    Manufacturer Item:
    JME16C2SN1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Package Gas/Electric 5 Ton R454B 14 SEER 230/3 R454B

  • Efficiency - The 3 ton through 5 ton units reach 13.4 SEER2 and 14.0 SEER. The 6 ton unit reaches 15 IEER with the standard, factory-installed IntelliSpeed variable frequency drive. Gas/electric units have electronic spark ignition and power vented combustion with steady state efficiencies of 80%. The heat pumps reach 14.0 SEER, 13.4 SEER2, 8.0 HSPF, and 6.7 HSPF2. These efficiencies meet all legislated minimum levels and provide low operating costs.
  • DOE (Department of Energy) compliant - All KE models meet minimum DOE efficiencies for cooling and fan efficiencies. Single phase gas heating products are fan energy rated (FER) to meet DOE requirements. Note: All single phase 3 to 5 ton gas heating units are equipped with an ECM motor on direct drive units and a VFD on belt drive units. Coil technology  All KE condensers utilize MicroChannel all-aluminum condensers which provide improved heat transfer capabilities and reduced charge volumes. All evaporators utilize a conventional copper tube/aluminum fin design for proven reliability and performance.
  • Convertible airflow design - All models (including those with an economizer) are suitable for either bottom or horizontal duct connections. For bottom duct, remove the sheet metal panels from the supply and return air openings through the base of the unit. For horizontal duct, remove the supply and return air panels on the rear of the unit.

    York KE060H12A2AAAAA1A1

    • Item#:
    KE060H12A2AAAAA1A1
    Manufacturer Item:
    KE060H12A2AAAAA1A1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Package Gas/Electric 7-1/2 Ton R454B 14 SEER 230/3 R454B

    York KJ090N18P2AAAAA1A1

    Item#:
    KJ090N18P2AAAAA1A1
    Manufacturer Item:
    KJ090N18P2AAAAA1A1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Air Handler Multi-Position 230/1 4 Ton R454B TXV ECM

    Features
  • Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation
  • Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application
  • Designed for easy installation and service
  • A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion. A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

    York JHE48D5CG2SS1

    • Item#:
    JHE48D5CG2SS1
    Manufacturer Item:
    JHE48D5CG2SS1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Package Gas/Electric 6 Ton R454B 14 SEER 230/3 R454B

  • Efficiency - The 3 ton through 5 ton units reach 13.4 SEER2 and 14.0 SEER. The 6 ton unit reaches 15 IEER with the standard, factory-installed IntelliSpeed variable frequency drive. Gas/electric units have electronic spark ignition and power vented combustion with steady state efficiencies of 80%. The heat pumps reach 14.0 SEER, 13.4 SEER2, 8.0 HSPF, and 6.7 HSPF2. These efficiencies meet all legislated minimum levels and provide low operating costs.
  • DOE (Department of Energy) compliant - All KE models meet minimum DOE efficiencies for cooling and fan efficiencies. Single phase gas heating products are fan energy rated (FER) to meet DOE requirements. Note: All single phase 3 to 5 ton gas heating units are equipped with an ECM motor on direct drive units and a VFD on belt drive units. Coil technology  All KE condensers utilize MicroChannel all-aluminum condensers which provide improved heat transfer capabilities and reduced charge volumes. All evaporators utilize a conventional copper tube/aluminum fin design for proven reliability and performance.
  • Convertible airflow design - All models (including those with an economizer) are suitable for either bottom or horizontal duct connections. For bottom duct, remove the sheet metal panels from the supply and return air openings through the base of the unit. For horizontal duct, remove the supply and return air panels on the rear of the unit.

    York KE072H12B2AAAAA1A1

    • Item#:
    KE072H12B2AAAAA1A1
    Manufacturer Item:
    KE072H12B2AAAAA1A1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Package Gas/Electric 10 Ton R454B 14 SEER 230/3 R454B

    York KJ120N24R2AAAAA1A1

    Item#:
    KJ120N24R2AAAAA1A1
    Manufacturer Item:
    KJ120N24R2AAAAA1A1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Package Gas/Electric 4 Ton R454B 14 SEER 230/3 R454B

  • Efficiency - The 3 ton through 5 ton units reach 13.4 SEER2 and 14.0 SEER. The 6 ton unit reaches 15 IEER with the standard, factory-installed IntelliSpeed variable frequency drive. Gas/electric units have electronic spark ignition and power vented combustion with steady state efficiencies of 80%. The heat pumps reach 14.0 SEER, 13.4 SEER2, 8.0 HSPF, and 6.7 HSPF2. These efficiencies meet all legislated minimum levels and provide low operating costs.
  • DOE (Department of Energy) compliant - All KE models meet minimum DOE efficiencies for cooling and fan efficiencies. Single phase gas heating products are fan energy rated (FER) to meet DOE requirements. Note: All single phase 3 to 5 ton gas heating units are equipped with an ECM motor on direct drive units and a VFD on belt drive units. Coil technology  All KE condensers utilize MicroChannel all-aluminum condensers which provide improved heat transfer capabilities and reduced charge volumes. All evaporators utilize a conventional copper tube/aluminum fin design for proven reliability and performance.
  • Convertible airflow design - All models (including those with an economizer) are suitable for either bottom or horizontal duct connections. For bottom duct, remove the sheet metal panels from the supply and return air openings through the base of the unit. For horizontal duct, remove the supply and return air panels on the rear of the unit.

    York KE048H12A2AAAAA1A1

    • Item#:
    KE048H12A2AAAAA1A1
    Manufacturer Item:
    KE048H12A2AAAAA1A1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Package Gas Unit 4 Ton 13.4 SEER 230/3 47" H x 45.75"W x 51.25" D R454B

    Proven quality construction
  • Next-generation, high-efficiency blower delivers reduced energy consumption
  • Advanced fan design and vibration-reducing technology minimize noise for peace and quiet
  • Stainless-steel heat exchanger
  • Durable powder-coat paint is 1,000-hour salt-spray rated and in a sleek new color Efficient performance
  • 5.2 SEER2 models meet CEE Tier 1 eligibility requirements for 25C Federal Tax Credits and other rebates/incentives Easy installation and servicing
  • Single- and three-phase models available for residential and light-commercial applications
  • Individual panels and front-facing components for easy access
  • Convertible airflow design allows upflow, downflow or horizontal applications
  • Easy-to-read, color-coded wiring diagrams

    York PG3E48L10S31

    • Item#:
    PG3E48L10S31
    Manufacturer Item:
    PG3E48L10S31
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM
    |◀ ◀ 13 - 24 of 60 ▶ ▶|
    View: