Home  > MALCO PRODUCTS, INC.(x)
|◀ 1 - 12 of 108 ▶|
View:
This unique, exclusive, (U.S. Patent Pending), double-duty chuck driver ensures that popular 1/4" and 5/16" magnetic hex drives are always at hands reach. The dual-sided hex socket fits over a 1/4" magnet-tipped, ball-detent locking hex shaft and is quickly reversed for changing sizes. Tested torque of the socket and shaft is equal to comparable one-piece single size drivers to ensure optimum screw performance. The removable, reversible socket also allows easy access for cleaning the magnet tip to eliminate any troublesome buildup of metal shavings in the hex opening. Positive engagement of hex head fasteners is never compromised. The number MSHC reversible hex chuck driver is ideal for pairing with Malco Zip-In self-piercing or Bit-Tip drill and tap metal screws.
  • Tested one-piece driver strength
  • Easy clean magnet
Item#:
MSHC
Manufacturer Item:
MSHC
Manufacturer:
MALCO PRODUCTS, INC.
A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In`s sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In`s penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.
  • Head Size: 1/4"
  • Length: 1/2"
  • Number: 8
  • Quantity: 1,000
  • Package Type: Tub
  • Single starting thread machined down to very tip of screw point
  • Instantly penetrates and engages in heavy gauge sheet metal and layered light gauge
  • Undercut-indented hex washer slotted head
  • Zinc Plated
  • Burr Fee
  • Full 1/4" (no 8) head will not strip out of hex driver opening
  • One 1/4" hex driver accommodates all sizes
  • Undercut - always seats flush
  • Quality controlled heat treat
  • Sharp tapered point will not mushroom or break
Sid Harvey Item #:T473-2: Replaces Part #:'s : 13318
Item#:
T473-2
Manufacturer Item:
HW8X1/2ZT
Manufacturer:
MALCO PRODUCTS, INC.
Use the Malco C5R Crimper to downsize stove pipe and round metal duct to create a male connection for joining sections. The 5 blades of this versatile job-site hand tool produce a 1-5/8 Inch long, shallow, double crimp that replicates factory indentations and ensures a tight fitting, leak-proof connection. The connection is also more self-supporting during installation. A handle closing stop maintains a consistent crimp. Hardened all-steel construction and a nickel chrome finish ensure long service life. The Malco C5R Crimper also features ergonomic RedLine Handle technology. An engineered handle opening compliments the natural power stroke of any user's hand and maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage. Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job.
  • Quickly downsize ends of round duct and stove pipe
  • Creates a tight fitting, more self supporting crimp connection
  • Compound leverage produces 7 to 1 mechanical advantage
  • Ergonomic redline handles won't wear you down
Item#:
C5R
Manufacturer Item:
C5R
Manufacturer:
MALCO PRODUCTS, INC.
Malco C-RHEX MSHXLC Cleanable Reversible Dual Side Magnetic Hex Driver, Quickly change between 1/4 and 5/16" hex sizes with Malcos unique, exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits over a 1/4" magnet-tipped, ball locking hex shaft, and can be quickly reversed to change sizes. Eliminate troublesome buildup of metal shavings in the hex tip with the easy clean magnet. Just swipe with a glove or shop towel to clear any metal shavings. Tested torque of the reversible hex chuck driver design is equal to one-piece drivers.
Item#:
MSHXLC
Manufacturer Item:
MSHXLC
Manufacturer:
MALCO PRODUCTS, INC.
Malco C-RHEX MSHMLC Cleanable Reversible Dual Side Magnetic Hex Driver, Quickly change between 1/4 and 5/16" hex sizes with Malcos unique, exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits over a 1/4" magnet-tipped, ball locking hex shaft, and can be quickly reversed to change sizes. Eliminate troublesome buildup of metal shavings in the hex tip with the easy clean magnet. Just swipe with a glove or shop towel to clear any metal shavings. Tested torque of the reversible hex chuck driver design is equal to one-piece drivers.
Item#:
MSHMLC
Manufacturer Item:
MSHMLC
Manufacturer:
MALCO PRODUCTS, INC.
Malco C-RHEX MSHLC Cleanable Reversible Dual Side Magnetic Hex Driver, Quickly change between 1/4 and 5/16" hex sizes with Malcos unique, exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits over a 1/4" magnet-tipped, ball locking hex shaft, and can be quickly reversed to change sizes. Eliminate troublesome buildup of metal shavings in the hex tip with the easy clean magnet. Just swipe with a glove or shop towel to clear any metal shavings. Tested torque of the reversible hex chuck driver design is equal to one-piece drivers.
Item#:
MSHLC
Manufacturer Item:
MSHLC
Manufacturer:
MALCO PRODUCTS, INC.
A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.
  • Head will not strip out of hex driver opening
  • Undercut - always seats flush
  • Burr free
  • Patented head markings U.S. patent number D524638
  • Sharp tapered point will not walk, mushroom or break Malco Zip-In HW8X3/4ZT Bright Zinc-Plated Steel Indented Hexagonal Washer Head Self Piercing Screw, #8 x 3 Inch, Slotted, 1000/Pack Sid Harvey Item #:T473-3: Replaces Part #:'s : 13328
Item#:
T473-3
Manufacturer Item:
HW8X3/4ZT
Manufacturer:
MALCO PRODUCTS, INC.
The time-saving Turboshear model number TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. Its that easy to convert your power drill to a power shear! This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20-gauge (1.02 mm) galvanized steel. Blind cuts require only a 1/2 Inch starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, ductwork, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. Long-wearing hardened jaws are also replaceable. For premium performance without the premium price of a dedicated power shear, Turboshear is an easy addition to every tool bag.
  • Inserts into chuck of A/C or cordless drill
  • Offset design saves hands
  • Navigates tight patterns and square cuts
  • Cuts a variety of building materials
  • Cut-away view
  • Tsdc drill clamp (optional)
  • Made in the U.S.A.
Item#:
TS1
Manufacturer Item:
TS1
Manufacturer:
MALCO PRODUCTS, INC.
Bit-Tip has a wide range of industry applications. Select the Bit-Tip that's right for the job. Point length will determine metal thickness that can be drilled, tapped and fastened. Also, plywood, soft wood, composition board, drywall, insulation and laminates may be fastened to metal framing or components. Made from strong, high quality, specially heat treated steel. Bit-Tip self drilling and tapping screws are precision cold forged insuring uniformity of dimension and drill point contours. The versatile Bit-Tip screw is an excellent replacement for fastening operations now using rivets, nuts and bolts, spot welds or adhesives. Bit-Tip also eliminates the need for costly auxiliary fastening equipment such as drill bits, taps and welding equipment.
  • Bit-tip drill and tap screws produce the optimum hole size for a quick tight fit
  • Bit-tip also eliminates the need for costly auxiliary fastening equipment such as drill bits, taps and welding equipment
  • Precision cold forged insuring uniformity of dimension and drill point contours Requires only a standard screw gun power tool rated at 2500 rpm equipped with drilling depth locator
  • Patented head markings U.S. patent number D524638
Sid Harvey Item #:BT133T: Replaces Part #:'s : 13113
Item#:
BT133T
Manufacturer Item:
BT133T
Manufacturer:
MALCO PRODUCTS, INC.
Malco 24F Folding Tool, 24 Inch L
  • Folding tool seams are formed from two steel halves, permanently joined together
  • Handy sight holes assure proper depth alignment Sid Harvey Item #:T646-3B: Replaces Part #:'s : 13044
Item#:
T646-3B
Manufacturer Item:
24F
Manufacturer:
MALCO PRODUCTS, INC.
Malco D6AST Galvanized Steel Single Bearing Pre-assembled Round Damper with Handle and Wingnut, 6 Inch
Sid Harvey Item #:D6AS: Replaces Part #:'s : 13145
Item#:
D6AS
Manufacturer Item:
D6AST
Manufacturer:
MALCO PRODUCTS, INC.
A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.
  • Undercut-indented hex washer slotted head
  • Burr free
  • Full 1/4 Inch (number 8) head will not strip out of hex driver opening
  • (1) 1/4 Inch hex driver accommodates all sizes
  • Undercut - always seats flush
  • Trademarked and patented head markings indicate 1 and only genuine zip-ins US patent number D524, 638
  • Combination lead double thread design: single starting thread machined down to very tip of screw point, instantly penetrates and engages in heavy gauge sheet metal and layered light gauge
  • Consistent hard point: quality controlled heat treat, sharp tapered point will not mushroom or break, no walking
Sid Harvey Item #:T473-4: Replaces Part #:'s : 11695
Item#:
T473-4
Manufacturer Item:
HW8X1ZT
Manufacturer:
MALCO PRODUCTS, INC.
|◀ 1 - 12 of 108 ▶|
View: