Home  > MALCO PRODUCTS, INC.(x)
|◀ 13 - 24 of 116 ▶|
View:
Malco T646-16 Divider 24"
Item#:
T646-16
Manufacturer Item:
50916
Manufacturer:
MALCO PRODUCTS, INC.
Malco T611-70 Double Ender Drill Bit 1/8"
Item#:
T611-70
Manufacturer Item:
DE18
Manufacturer:
MALCO PRODUCTS, INC.
Malco DE30 135 deg Polished Alloy Steel Double Ender Drill Bit, 0.1285Sid Harvey Item #:DE30: Replaces Part #:'s : 13158
Item#:
DE30
Manufacturer Item:
DE30
Manufacturer:
MALCO PRODUCTS, INC.
Malco C-RHEx MSHxLC Cleanable Reversible Dual Side Magnetic Hex Driver, Quickly change between 1/4 and 5/16" hex sizes with Malcos unique, exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits over a 1/4" magnet-tipped, ball locking hex shaft, and can be quickly reversed to change sizes. Eliminate troublesome buildup of metal shavings in the hex tip with the easy clean magnet. Just swipe with a glove or shop towel to clear any metal shavings. Tested torque of the reversible hex chuck driver design is equal to one-piece drivers.
Item#:
MSHXLC
Manufacturer Item:
MSHXLC
Manufacturer:
MALCO PRODUCTS, INC.
Malco C-RHEx MSHMLC Cleanable Reversible Dual Side Magnetic Hex Driver, Quickly change between 1/4 and 5/16" hex sizes with Malcos unique, exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits over a 1/4" magnet-tipped, ball locking hex shaft, and can be quickly reversed to change sizes. Eliminate troublesome buildup of metal shavings in the hex tip with the easy clean magnet. Just swipe with a glove or shop towel to clear any metal shavings. Tested torque of the reversible hex chuck driver design is equal to one-piece drivers.
Item#:
MSHMLC
Manufacturer Item:
MSHMLC
Manufacturer:
MALCO PRODUCTS, INC.
Malco C-RHEx MSHLC Cleanable Reversible Dual Side Magnetic Hex Driver, Quickly change between 1/4 and 5/16" hex sizes with Malcos unique, exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits over a 1/4" magnet-tipped, ball locking hex shaft, and can be quickly reversed to change sizes. Eliminate troublesome buildup of metal shavings in the hex tip with the easy clean magnet. Just swipe with a glove or shop towel to clear any metal shavings. Tested torque of the reversible hex chuck driver design is equal to one-piece drivers.
Item#:
MSHLC
Manufacturer Item:
MSHLC
Manufacturer:
MALCO PRODUCTS, INC.
Specially angled ground tip easily punctures and rips duct to the desired length starting hole. Hardened tip is ground on both sides to create 2 cutting edges for long, useful life. Cutting edges are aligned with shaft flats for large striking surfaces. Corrosion resistant blade, cushioned grip and a hang hole for storage complete this handy tool.
  • Works with the TurboShear
Sid Harvey Item #:CDR: Replaces Part #:'s : 40949
Item#:
CDR
Manufacturer Item:
CDR
Manufacturer:
MALCO PRODUCTS, INC.
Malco DS1 Anodized Aluminum Duct Stretcher, 16" OAL
  • Use the duct stretcher to hold duct in place with 1 hand while slipping drive cleat in place with other hand
  • The low profile, straight body is designed to go anywhere, even in the tightest quarters
  • Additional spacing holes allow wheels to be adjusted to span greater distances
  • Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up hole
Item#:
T646-5
Manufacturer Item:
DS1
Manufacturer:
MALCO PRODUCTS, INC.
Hex corners of keys are sharp and clean. Finish is black oxide. Smooth zinc plated case can be used as handle for extra leverage. Flat spring holds keys in any work position.
  • 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4" Hex Key
Item#:
W48-MALCO
Manufacturer Item:
W48
Manufacturer:
MALCO PRODUCTS, INC.
Built-in wire cutter lets you finish the job you started with just one tool! double edged blade cleanly pierces through outer skin and insulation. Cuts from either direction around entire circumference of duct. Fine honed blade is long lasting stainless steel. Wire cutter cuts hardened wire rib coil. Compound leverage, for easy wire cutting. comfortable, non-slip vinyl gripped handles.
  • Built-in wire cutter
  • Double edged blade
  • Cuts from either direction
  • Fine honed blade
  • 10.4 to 1 - 11.9 to 1 wire cutter variable leverage ratio (high/low) throughout stroke
Item#:
T671-2
Manufacturer Item:
FDC1
Manufacturer:
MALCO PRODUCTS, INC.
Malco W29 Black Oxide Folding Hex Key Set, 9 Pieces
  • Folds up like a knife, stores easily, eliminates lost keys
  • Sturdy case can be used as a handle for extra leverage to apply torque
Sid Harvey Item #:T650-1: Replaces Part #:'s : T650
Item#:
T650-1
Manufacturer Item:
W29
Manufacturer:
MALCO PRODUCTS, INC.
Malco 12F Folding Tool 12"
Item#:
12F
Manufacturer Item:
12F
Manufacturer:
MALCO PRODUCTS, INC.
|◀ 13 - 24 of 116 ▶|
View: