The ML6425 spring return electric linear valve actuators are floating control actuators used with controllers that provide a switched or floating SPDT output. These actuators operate standard Honeywell valves in heating, ventilating, and air conditioning (HVAC) applications. The ML7425 spring return electric linear valve actuators are modulating control actuators used with controllers that provide an analog output of 0 - 10 VDC or 2 - 10 VDC. These actuators operate standard Honeywell valves in heating, ventilating, and air conditioning (HVAC) applications. An internal selector can be used to reverse the direction of action.

• Easy and quick installation on valves with 1-3/8" bonnet and 3/4" stroke
• No separate linkage required
• Conduit connector standard
• No adjustments required on linkage
• Accurate valve positioning
• Low power consumption
• High close-off ratings
• Force limiting end switches
• Internal manual operator
• Synchronous motor
• Maintenance free
• Directly on V5011/V5013 globe valves and VGF flanged globe valves (3/4" stroke) mounting
• IP54, class I insulation environmental, electrical or ingress protection rating
• Valve actuator type
• 0 - 10 VDC, 2 - 10 VDC control signal
• Stem down on power failure fail safe mode or spring return direction
• Conduit connector and one knockout on actuator case cable
• Manual override winding operation

,
,

ML7425A3013

ML7425A3013

Honeywell ML7984A4009 Actuator 24 VAC 70-90SEC Used On V5011 & V5013 Valves,
,

Honeywell ML7984A4009

Honeywell ML7984A4009

Honeywell ML6161A2009/B Steel Plate and Plastic Non-Spring Return Damper,
,

ML616A2009

ML616A2009

Honeywell ML6984A4000 Non-Spring Return Actuator 24 VAC 135 Lbs,
,

Honeywell ML6984A4000

Honeywell ML6984A4000

Honeywell ML6425A3022 Actuator Direct Mount Spring 24 VAC,
,

ML6425A3022

ML6425A3022

Honeywell ML6161B2024 Non-Spring Return Damper Actuator 24 VAC 90 Seconds,
,

Honeywell ML6161B2024

Honeywell ML6161B2024

Honeywell M7415A1006 Actuator 24 VAC CW 90 Second Spring Return,
,

M7415A1006

M7415A1006

Honeywell Home M847D-VENT/U 2-Position Replacement Spring Return Actuator, 24 volt, Power Open/Spring Closed Motor

• The M847D is a two position, 24 VAC spring return actuators designed to operate ARD, EARD and ZD zone dampers
• Low voltage, spring return damper actuators
• Equipped with anti-rotation and drive shaft extensions for direct mounting to 7 or 16 Inch diameter coupling style dampers
• Adjustable range stops

,
,

Honeywell M847D-VENT

Honeywell M847D-VENT

Honeywell M7215A1008 Actuator 24 VAC 2-10VDC 90 Second Spring Return,
,

M7215A1008

M7215A1008

25 lb-Inch spring return damper actuators provide two-position, three-position, floating, or modulating control of economizer systems, ventilation dampers and combustion air dampers used in residential or commercial HVAC equipment.

• Thermistor modulating synchronous motor
• Quiet, high efficiency drive motor
• Spring returns motor shaft to normal position in the event of power failure
• High impact, glass-fiber reinforced plastic case is rugged, lightweight and corrosion-resistant
• 90 sec opening
• 18 sec nominal spring return
• 90 deg fixed stroke
• Thermistor modulating control signal
• Opens CW, spring return CCW

Sid Harvey Item #:M7415B1004: Replaces Part #:'s : 39898,
,

Honeywell M7415B1004

Honeywell M7415B1004

Honeywell Home M847D-ZONE/U 2-Position Replacement Spring Return Actuator, 24 volt, Power Closed/Spring Open Motor

• The M847D is a two position, 24 VAC spring return actuators designed to operate ARD, EARD and ZD zone dampers
• Low voltage, spring return damper actuators
• Equipped with anti-rotation and drive shaft extensions for direct mounting to 7 or 16 Inch diameter coupling style dampers
• Adjustable range stops
• Direct replacement for M847D1004

,
,

Honeywell M847D-ZONE

Honeywell M847D-ZONE