• Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• Include diaphragm powerhead and micro Switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Electrical burner rating: full load - 7.4 amp at 120 VAC line voltage, 3.7 amp at 240 VAC; locked rotor - 44.4 amp at 120 VAC line voltage, 22.7 amp at 240 VAC
• Electrical circulator rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor Honeywell L8124G1020 High Limit Triple Aquastat Relay, 120 VAC at 60 Hz, SPST
  
  

  Honeywell C317-8

Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems, including domestic hot water service
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• Include diaphragm powerhead and micro Switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Electrical burner rating: 1.25 amp at 24 VAC; 30 VA (total load) terminals B1-B2 and TV-Z
• Electrical circulator rating: at full load: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC; at locked rotor: 44.4 amp at 120 VAC, 22.2 amp at 240 VAC
  
  

  C317-7

Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• Include diaphragm powerhead and micro Switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Electrical burner rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor
• Electrical circulator rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor
• Includes 3" insertion well and ground screw
  
  

  Honeywell C317-2B

Honeywell C293-3

• Electric heat thermostats provide line VAC age control of electric heating systems
• Easy to install, color coded leads
• Rugged, plastic mounting base
• Mount on standard 2 x 4" outlet box or 4 x 4" junction box
• Select models include extra knob decal for recalibration, if necessary

HONEYWELL C182-5

HONEYWELL C182-5

Totally enclosed micro switch snap acting switches operate on temperature rise to setpoint
• Visible control point scale and external adjustments screw permit easy setting
• Horizontal or vertical insertion of the sensing element
• Direct/well immersion of the sensing element
• Remote buLbs. model may be used to sense air temperature in ducts and in outside air sensing applications
• Contacts break on temperature rise
• Screw terminals wiring
  
  

  Honeywell C290-6A

• 3 wiring terminal options available for easy installation
• Push-in receptacles for stripped wire
• Female receptacles for 1/4" male flag connectors
• Field add-on screw terminals
• Controls adapt to many competitive mounting holes in replacement applications
• Available in a variety of fan and high limit setting ranges
• L4064B, W models have manual fan switch that overrides fan control to keep fan running continuously
• Super tradeline models with mounting adapters for easy installation and strain relief bushings to protect wiring from field abuse

Honeywell C434-12

Honeywell C434-12

DR65A3000