S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
OLR154F20
Item#:
OLR154F20
Manufacturer Item:
OLR154F20A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB448090H000B
Manufacturer Item:
PGB448090H000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB436060H000B
Manufacturer Item:
PGB436060H000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
t
International Comfort Products N96MSN1002120A
Item#:
N96MSN1002120A
Manufacturer Item:
N96MSN1002120A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB448090K001B
Manufacturer Item:
PGB448090K001B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
Fully insulated cabinet helps keep the heat moving to your ductwork
Air purifier and humidifier compatible
High temperature limit control prevents overheating
10-Year Parts Limited Warranty upon timely registration+
Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
Fully insulated cabinet helps keep the heat moving to your ductwork
Air purifier and humidifier compatible
High temperature limit control prevents overheating
10-Year Parts Limited Warranty upon timely registration+
Lifetime Heat Exchanger Limited Warranty upon timely registration+
Lifetime Heat Exchanger Limited Warranty upon timely registration+
International Comfort Products N96VSN0401410B
Item#:
N96VSN0401410B
Manufacturer Item:
N96VSN0401410B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
t
International Comfort Products N96MSN0401712A
Item#:
N96MSN0401712A
Manufacturer Item:
N96MSN0401712A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products N95ESN0601412A
Item#:
N95ESN0601412A
Manufacturer Item:
N95ESN0601412A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB436060K000B
Manufacturer Item:
PGB436060K000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products PHJ460000K000K
Item#:
PHJ460000K000K
Manufacturer Item:
PHJ460000K000K
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Package Gas/Electric 3 Ton 36K BTU Cooling 90K BTU Heating 208/230/3 R410A 51-3/4 x 48-3/16 x 32-5/8
INTERNATIONAL COMFORT PRODUCTS PGD436090H000K
Item#:
PGD436090H000K
Manufacturer Item:
PGD436090H000K
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Item#:
PHB430000K000B
Manufacturer Item:
PHB430000K000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS