Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 721 - 732 of 1370 ▶ ▶|
View:

Heil Air Conditioning Condensing Unit 2 Ton

  • 17 SEER R410A 2-Stage Communicating
    • Copeland Scroll® Ultratech compressors on all models
    • Filterdrier supplied with every unit for field installation
    • External high and low refrigerant service ports
    • High and low pressure switches
    • Copper tube / aluminum fin coil
    • Selfconfiguring installation capabilities with Observer Communicating Wall Control
    • Outdoor temperature sensor factory installed
    • Ball Bearing PSC fan motors on all models
    • High performance compressor sound shield standard
    • Isolation compressor grommets
    • Text based diagnostics with Observer CommunicatingWall Control
    • Only 2 control wires required from communicating indoor unit to condenser
    • Easy access service valves on all models
    • Innovative control box design
    • Only two screws to access control panel
    • Factory charged with R410A refrigerant
    • High gloss, bakedon powder coat finish over Gallonvanized steel
    • Postpainted (black) coil fins
    • Coated, weatherresistant cabinet screws
    • Coated inlet grille with 3/8 (10mm) spacing for extraprotection
    • Corner posts for extra strength and style
    • 10 year No Hassle Replacement limited warranty 5 year parts limited warranty (including compressor andcoil)
    • Item#:
    HCA724GK
    Manufacturer Item:
    HCA724GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    HCA7-ICP-Care_Misc
    HCA7-ICP_Broc
    HCA7-ICP_Install
    HCA7-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
    • Item#:
    G80CTL0902120B
    Manufacturer Item:
    G80CTL0902120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    QuietComfort 96 Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Gas Furnace 80K BTU 96% AFUE ECM Motor Multipoise 2 Stage 17"
    • Item#:
    G96VTN0801716B
    Manufacturer Item:
    G96VTN0801716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96VTN

    Mainline Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D>>LIMITED STOCK CLEARANCE ITEM<<

  • G8MVL Series Steel 2-Stage Mainline Variable Speed Gas Furnace,
      Supports 2-stage cooling units
    • Flame roll-out sensors standard
    • Dehumidification feature in cooling
    • 24 VAC humidifier terminal and electronic air cleaner terminal
    • Tougher - variable speed blower motor, adjustable heating blower off delay, factory set blower on delay, RPJ aluminized steel heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter, 1-piece preprinted steel cabinet
    • Quieter - 2-stage heating operation, 2-stage induced draft blower, in-shot burners, insulated blower compartment
    • Innovative knobs for easy door removal and secure attachment
    • Through the casing flue pipe for counterflow or horizontal applications with accessory
    • 4-position - upflow/downflow/horizontal installation
    • 3-position vent elbow capability
    • Slide out blower assembly
    • 10 years no hassle replacement, 5 years parts and 20 years heat exchanger limited warranty
    • Solid state time operation heating blower control
    • 4.5 - 13.6" WC inlet gas pressure
    • Low NOx
    • Item#:
    G8MVL0701716
    Manufacturer Item:
    G8MVL0701716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G8MVL0701716_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
    • Item#:
    G80CTL0901716B
    Manufacturer Item:
    G80CTL0901716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    96% Variable-Speed Gas Heating Furnace

  • Variable-speed blower motor and two-stage gas valve provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with compatible heat pump & thermostat for energy-saving heating performance
  • As a two-stage furnace, it operates at low stage most of the time to save energy, smoothly ramping up the heat to high stage as temperatures drop
  • Fully insulated cabinet helps keep the heat moving to your ductwork and provides quiet operation
  • Air purifier and humidifier compatible
  • Wi-Fienabled remote access with the IonSystem Control±
    • Item#:
    G96CTN0401410B
    Manufacturer Item:
    G96CTN0401410B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96CTN-Care_Misc
    G96CTN_Install
    G96CTN_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
    • Item#:
    G80CTL0701716B
    Manufacturer Item:
    G80CTL0701716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    QuietComfort 96 Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Gas Furnace 80K BTU 96% AFUE ECM Motor Multipoise 2 Stage 21"
    • Item#:
    G96VTN0802120B
    Manufacturer Item:
    G96VTN0802120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96VTN

    Ion 98 Variable-Speed Modulating Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • Operates quieter at lower heating rates
  • Variable speed induced draft combustion blower
  • Variable speed, constant airflow, communicating ECM blower motor
  • Insulated steel cabinet


    • Item#:
    G97CMN1002122A
    Manufacturer Item:
    G97CMN1002122A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G97CMN-ICP-Care_Misc
    G97CMN-ICP_Install
    G97CMN-ICP_Spec

    Ion 98 Variable-Speed Modulating Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • Operates quieter at lower heating rates
  • Variable speed induced draft combustion blower
  • Variable speed, constant airflow, communicating ECM blower motor
  • Insulated steel cabinet
    • Item#:
    G97CMN1002122B
    Manufacturer Item:
    G97CMN1002122B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G97CMN-ICP-Care_Misc
    G97CMN-ICP_Install
    G97CMN-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
    • Item#:
    G80CTL0702120A
    Manufacturer Item:
    G80CTL0702120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    • Item#:
    G80CTL0702120B
    Manufacturer Item:
    G80CTL0702120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec
    |◀ ◀ 721 - 732 of 1370 ▶ ▶|
    View: