Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 709 - 720 of 1041 ▶ ▶|
View:

Up to 92% Standard NOX Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Singlestage gas valve and fixedspeeds, constant torque ECM
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOX emissions requirement.
  • Flame rollout sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosionresistant, prepainted steel cabinet

    International Comfort Products N92ESN0401410A

    • Item#:
    N92ESN0401410A
    Manufacturer Item:
    N92ESN0401410A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92ESN-Care_Misc
    N92ESN_Install
    N92ESN_Spec

    Air Conditioning Condensing Unit 1-Stage 1.5 Ton 15 SEER R454B

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-oz.one depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N5A5S18CKAWA
    Manufacturer Item:
    N5A5S18CKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A5S-Series_Spec

    Air Conditioning Condensing Unit 3 Ton 13.4 SEER 2 Stage R454B

    Efficiency
  • 13.4 - 16.0 SEER2 / 11.0  13.5 EER2
  • Indoor air quality accessories available Comfort
  • System supports programmable or standard thermostat controls Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier Durability Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard Applications
  • Longline  up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.)
  • Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits.
    • Item#:
    N5A4S36AKANA
    Manufacturer Item:
    N5A4S36AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A4S_SPEC

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0801716A

    • Item#:
    N92MSN0801716A
    Manufacturer Item:
    N92MSN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    ICP Heat Pump Condensing Unit 1-Stage

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-oz.one depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard

    N5H5S18AKAAA

    • Item#:
    N5H5S18AKAAA
    Manufacturer Item:
    N5H5S18AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5H5S-Series-ICP_Spec

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    • Item#:
    N80ESN1552420A
    Manufacturer Item:
    N80ESN1552420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN1552420A_Spec

    ICP Heat Pump Condensing Unit 4 Ton 18 SEER 2 Stage 230/1 R454B

    Efficiency
  • Up to 18.5 SEER2 / Up to 14 EER2 / Up to 8.5 HSPF2
  • Indoor air quality accessories available Sound
  • Sound level as low as 67 dBA Comfort
  • System supports Thermidistat or standard 2-stage thermostat controls Reliability
  • Non-ozone depleting and low global warming potential R-454B refrigerant
  • Front-seating service valves
  • 2-stage scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability Durability
  • Protection Package: Solid, durable sheet metal construction
  • Post-painted cabinet finish over galvanized steel Applications
  • Long-line - up to 250 feet (76.2 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Long Line Guide for more information.)
  • Low ambient cooling (down to 0°F / -17.8°C ) with approved low ambient accessory kits.
    • Item#:
    N5H8T48AKAAA
    Manufacturer Item:
    N5H8T48AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5H8T_SPEC

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN1102120A

    • Item#:
    N80MSN1102120A
    Manufacturer Item:
    N80MSN1102120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    Air Conditioning Condensing Unit 1-Stage 2 Ton 15 SEER R454B

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-oz.one depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard

    N5A5S24AKAWA

    • Item#:
    N5A5S24AKAWA
    Manufacturer Item:
    N5A5S24AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A5S-Series_Spec

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products N80ESN0902120A

    • Item#:
    N80ESN0902120A
    Manufacturer Item:
    N80ESN0902120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN0902120A_Spec

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    N80MSN0701716A

    • Item#:
    N80MSN0701716A
    Manufacturer Item:
    N80MSN0701716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    ICP Heat Pump Condensing Unit 5 Ton 18 SEER 2 Stage 230/1 R454B

    Efficiency
  • Up to 18.5 SEER2 / Up to 14 EER2 / Up to 8.5 HSPF2
  • Indoor air quality accessories available Sound
  • Sound level as low as 67 dBA Comfort
  • System supports Thermidistat or standard 2-stage thermostat controls Reliability
  • Non-ozone depleting and low global warming potential R-454B refrigerant
  • Front-seating service valves
  • 2-stage scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability Durability
  • Protection Package: Solid, durable sheet metal construction
  • Post-painted cabinet finish over galvanized steel Applications
  • Long-line - up to 250 feet (76.2 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Long Line Guide for more information.)
  • Low ambient cooling (down to 0°F / -17.8°C ) with approved low ambient accessory kits.
    • Item#:
    N5H8T60CKAAA
    Manufacturer Item:
    N5H8T60CKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5H8T_SPEC
    |◀ ◀ 709 - 720 of 1041 ▶ ▶|
    View: