Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 637 - 648 of 1069 ▶ ▶|
View:

QuietComfort 96 Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

FEATURES:
  • Up to 96% AFUE in upflow and horizontal positions 95% AFUE in downflow position
  • All models earn the ENERGY STAR®
  • Two-stage heating operation
  • Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193 TOUGHER
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor QUIETER
  • Operates at quieter, lower heating rates
  • Two-speed induced draft combustion motor
  • Variable speed, constant torque ECM blower motor
  • Fully insulated steel cabinet EASIER TO INSTALL AND SERVICE
  • Direct vent (2-pipe), single-pipe venting or ventilated combustion air
  • 24 VAC humidifier terminal and electronic air cleaner terminal
  • 35 (889mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment conversion kits available
  • Four position upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Concentric vent available
  • Slide out heat exchanger assembly and blower assembly

    International Comfort Products G96VTN0401410B

    • Item#:
    G96VTN0401410B
    Manufacturer Item:
    G96VTN0401410B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96VTN

    97% Modulating Communicating Gas Heating Furnace 35" H x 24-1/2" W x 29-1/2" D

  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • Operates quieter at lower heating rates
  • Variable speed induced draft combustion blower
  • Variable speed, constant airflow, communicating ECM blower motor
  • Insulated steel cabinet

    International Comfort Products G97CMN1202422B

    • Item#:
    G97CMN1202422B
    Manufacturer Item:
    G97CMN1202422B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G97CMN-Care_Misc
    G97CMN_Install
    G97CMN_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL1102120B

    • Item#:
    G80CTL1102120B
    Manufacturer Item:
    G80CTL1102120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0902120B

    • Item#:
    G80CTL0902120B
    Manufacturer Item:
    G80CTL0902120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    QuietComfort 96 Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

    FEATURES:
  • Up to 96% AFUE in upflow and horizontal positions 95% AFUE in downflow position
  • All models earn the ENERGY STAR®
  • Two-stage heating operation
  • Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193 TOUGHER
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor QUIETER
  • Operates at quieter, lower heating rates
  • Two-speed induced draft combustion motor
  • Variable speed, constant torque ECM blower motor
  • Fully insulated steel cabinet EASIER TO INSTALL AND SERVICE
  • Direct vent (2-pipe), single-pipe venting or ventilated combustion air
  • 24 VAC humidifier terminal and electronic air cleaner terminal
  • 35 (889mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment conversion kits available
  • Four position upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Concentric vent available
  • Slide out heat exchanger assembly and blower assembly

    International Comfort Products G96VTN0801716B

    • Item#:
    G96VTN0801716B
    Manufacturer Item:
    G96VTN0801716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96VTN

    Mainline Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D >>LIMITED STOCK CLEARANCE ITEM<<

  • G8MVL Series Steel 2-Stage Mainline Variable Speed Gas Furnace,
    • Supports 2-stage cooling units
    • Flame roll-out sensors standard
    • Dehumidification feature in cooling
    • 24 VAC humidifier terminal and electronic air cleaner terminal
    • Tougher - variable speed blower motor, adjustable heating blower off delay, factory set blower on delay, RPJ aluminized steel heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter, 1-piece preprinted steel cabinet
    • Quieter - 2-stage heating operation, 2-stage induced draft blower, in-shot burners, insulated blower compartment
    • Innovative knobs for easy door removal and secure attachment
    • Through the casing flue pipe for counterflow or horizontal applications with accessory
    • 4-position - upflow/downflow/horizontal installation
    • 3-position vent elbow capability
    • Slide out blower assembly
    • 10 years no hassle replacement, 5 years parts and 20 years heat exchanger limited warranty
    • Solid state time operation heating blower control
    • 4.5 - 13.6" WC inlet gas pressure
    • Low NOx

      International Comfort Products G8MVL0701716

    • Item#:
    G8MVL0701716
    Manufacturer Item:
    G8MVL0701716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G8MVL0701716_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0901716B

    • Item#:
    G80CTL0901716B
    Manufacturer Item:
    G80CTL0901716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0701716B

    • Item#:
    G80CTL0701716B
    Manufacturer Item:
    G80CTL0701716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    QuietComfort 96 Gas Heating Furnace 35" H x 21" W x 29-1/2" D

    FEATURES:
  • Up to 96% AFUE in upflow and horizontal positions 95% AFUE in downflow position
  • All models earn the ENERGY STAR®
  • Two-stage heating operation
  • Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193 TOUGHER
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor QUIETER
  • Operates at quieter, lower heating rates
  • Two-speed induced draft combustion motor
  • Variable speed, constant torque ECM blower motor
  • Fully insulated steel cabinet EASIER TO INSTALL AND SERVICE
  • Direct vent (2-pipe), single-pipe venting or ventilated combustion air
  • 24 VAC humidifier terminal and electronic air cleaner terminal
  • 35 (889mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment conversion kits available
  • Four position upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Concentric vent available
  • Slide out heat exchanger assembly and blower assembly

    International Comfort Products G96VTN0802120B

    • Item#:
    G96VTN0802120B
    Manufacturer Item:
    G96VTN0802120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96VTN

    Ion 98 Variable-Speed Modulating Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • Operates quieter at lower heating rates
  • Variable speed induced draft combustion blower
  • Variable speed, constant airflow, communicating ECM blower motor
  • Insulated steel cabinet

    International Comfort Products G97CMN1002122A

    • Item#:
    G97CMN1002122A
    Manufacturer Item:
    G97CMN1002122A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G97CMN-ICP-Care_Misc
    G97CMN-ICP_Install
    G97CMN-ICP_Spec

    Ion 98 Variable-Speed Modulating Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • Operates quieter at lower heating rates
  • Variable speed induced draft combustion blower
  • Variable speed, constant airflow, communicating ECM blower motor
  • Insulated steel cabinet

    International Comfort Products G97CMN1002122B

    • Item#:
    G97CMN1002122B
    Manufacturer Item:
    G97CMN1002122B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G97CMN-ICP-Care_Misc
    G97CMN-ICP_Install
    G97CMN-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0702120A

    • Item#:
    G80CTL0702120A
    Manufacturer Item:
    G80CTL0702120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec
    |◀ ◀ 637 - 648 of 1069 ▶ ▶|
    View: