Nu-Calgon 4320-W8 Phase III Oil Test Kit,

Nu-Calgon 4320-W8

Nu-Calgon 4369-75 Spray-n-Bond-LV Gas Spray Adhesive, 12 oz. Aerosol Can

Nu-Calgon 4369-75

Nu-Calgon 4314-46 The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with base fluids that are specifically formulated to deliver optimum performance with minimal additive levels.

4314-46

Nu-Calgon 4300-52 Flush Service Hose for Flushing Refrigeration and Air Conditioning Systems, 24"

The Rx11-flush Hose is a 24" service hose that is perfect for applying Rx11-flush
• It is particularly useful in flushing line sets when using the Rx11-flush gun
  
  

  Nu-Calgon 4300-52

Nu-Calgon 4300-51 RX11-Flush Gray Flush Gun for Use with Rx11 Flush Rx11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems. The Rx11-flush gun is a trigger mechanism that attaches to a standard charging hose when applying Rx11-flush. Control at the injection point makes flushing easy and more practical for the technician, and the rubber flush tip makes it versatile in flushing lines as small as 1/4" and upto 1-1/8".

Nu-Calgon 4300-51

Nu-Calgon 4300-50 Flushing Tool for Flushing Refrigeration and Air Rx11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems. Its patented HFC based solvent formulation is powerful enough to flush away sludge, carbon residue, oils, acids, water and other particulate. This makes it ideal for system flushing after burnouts, retrofits and for flushing line sets for R-410A conversions. It is non-toxic, non-flammable and is non-oz.one depleting. From time to time, refrigeration and air conditioning systems suffer failures which result in contamination. The most common such failure is a compressor burnout. During such an event, the refrigeration system becomes contaminated with large quantities of unwanted particulate, sludge, acids, carbon residues and possibly moisture. All of these contaminants must be removed before the system can be returned to duty.

Nu-Calgon 4300-50

Nu-Calgon 4297-75 Pipe-Dri is an aerosol insulation which provides a moisture barrier to stop sweating and dripping on refrigeration lines, air conditioning lines, and other cold surfaces. Quickly adheres and dries to a hard water proof coating. Pipe-Dri's spray pattern permits spraying of odd shaped fittings and makes it possible to insulate hard to reach areas. Sweating and dripping are eliminated by this durable, waterproof protective barrier. It separates the warm moist air and the cold surface, preventing condensation from occurring. Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of 1" water pipe or eight square feet of flat surface area with two coats. Ideally, the product should be at room temperature (70- 75 deg F) and the surface to be coated at a lower temperature. A thick application is hard to form on warmer surfaces (above 80 deg F), however, a thicker coat may be achieved by applying 2 or more light coats. Once a coating has been allowed to dry and harden, it will be stable at temperatures up to 120 deg F.

4297-75

Nu-Calgon 4297-76 Pipe-Dri Spray Insulation

Pipe-Dri is an aerosol insulation which provides a moisture barrier to stop sweating and dripping on refrigeration lines, air conditioning lines, and other cold surfaces. Quickly adheres and dries to a hard water proof coating. Pipe-Dris spray pattern permits spraying of odd shaped fittings and makes it possible to insulate hard to reach areas.

This product is ideal for providing a moisture barrier for refrigeration and air conditioning lines, and cold water pipes, etc. Sweating and dripping are eliminated by this durable, waterproof protective barrier. It separates the warm moist air and the cold surface, preventing condensation from occurring. Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of one inch water pipe or eight square feet of flat surface area with two coats.

Ideally, the product should be at room temperature (70-75°F) and the surface to be coated at a lower temperature. A thick application is hard to form on warmer surfaces (above 80°F); however, a thicker coat may be achieved by applying 2 or more light coats. Once a coating has been allowed to dry and harden, it will be stable at temperatures up to 120°F.

Nu-Calgon 4300-89 System Flushing Injection Valve for Refrigeration

Nu-Calgon 4300-89

Nu-Calgon 4770-2 The No. 100P poly sprayer is constructed of high-density polyethylene. It has a funnel top which provides for easy chemical pouring and has a one Gallon working capacity. It comes with a 10" polypropylene pump, brass handle and extension wand with adjustable nozzle, a wear-resistant hose and a pressure relief valve.

4770-2

Nu-Calgon 4771-20 Chemical Sprayer 2 Gallon

4771-20