Nu-Calgon 4296-51 Pan-Spray Condensate Pan Leak Sealer, 16 oz. Can, Gas, Pan-Spray is an effective, easy-to-use water proof rubberized coating that won't chip, flake, or peel. It's ideal for sealing out rust and corrosion as well as repairing leaky condensate pans, cooling towers, swamp coolers, roofing, gutters, and down spouts. Pan Spray is the perfect solution for emergency and permanent repair. It is a quick, easy and economical repair on troublesome leaks. Use on condensate pans, swamp coolers, humidifier pans, plumbing and pipe fixtures, roofing, downspouts or gutters.

Nu-Calgon 4296-51

Nu-Calgon 4314-46 The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with base fluids that are specifically formulated to deliver optimum performance with minimal additive levels.

4314-46

Nu-Calgon 4184-08 Fluorescent Leak Detector 1Gallon

4184-08

Nu-Calgon 4300-52 Flush Service Hose for Flushing Refrigeration and Air Conditioning Systems, 24"

The Rx11-flush Hose is a 24" service hose that is perfect for applying Rx11-flush
• It is particularly useful in flushing line sets when using the Rx11-flush gun
  
  

  Nu-Calgon 4300-52

Nu-Calgon 4300-51 RX11-Flush Gray Flush Gun for Use with Rx11 Flush Rx11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems. The Rx11-flush gun is a trigger mechanism that attaches to a standard charging hose when applying Rx11-flush. Control at the injection point makes flushing easy and more practical for the technician, and the rubber flush tip makes it versatile in flushing lines as small as 1/4" and upto 1-1/8".

Nu-Calgon 4300-51

Nu-Calgon 4300-50 Flushing Tool for Flushing Refrigeration and Air Rx11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems. Its patented HFC based solvent formulation is powerful enough to flush away sludge, carbon residue, oils, acids, water and other particulate. This makes it ideal for system flushing after burnouts, retrofits and for flushing line sets for R-410A conversions. It is non-toxic, non-flammable and is non-oz.one depleting. From time to time, refrigeration and air conditioning systems suffer failures which result in contamination. The most common such failure is a compressor burnout. During such an event, the refrigeration system becomes contaminated with large quantities of unwanted particulate, sludge, acids, carbon residues and possibly moisture. All of these contaminants must be removed before the system can be returned to duty.

Nu-Calgon 4300-50

Nu-Calgon 4126-34 Bio-fresh CD is a ready-to-use bacteriostat, fungistat and deodorizer based upon chlorine dioxide technology. It is recommended for control of bacteria, mold, mildew, fungi and yeast in IAQ applications. Its EPA registration includes application in HVACR ventilating equipment, including coils, condensate pans, filters and duct-work.

A concentrated, ready-to-use bacteriostat that is a fungistat and deodorant
• EPA registered for application in HVACR systems no. 9804-3-65516
• Can be sprayed in occupied areas
• Kills odors and controls bacteria
• Eliminates odors where they exist
  
  

  Nu-Calgon 4126-34

Nu-Calgon 4182-08 One of the most important tasks of today's technician is refrigerant management and specifically leak detection. For this job, the technician requires a quality, effective leak detector and Cal-Blue products meet that need. There are 2 formulations in the Cal-Blue product line. Outstanding freeze-protection: 5 deg F. Cal-Blue products are the complete gas leak detector. Not only do they detect the smallest leak, they also provides other significant benefits. The high viscosity formula provides long-lasting bubbles and enables the product to remain in contact with the applied surface for an extended period of time, thereby allowing the smallest of leaks to be detected. It is also non-corrosive to metal and this is a significant feature as it helps to maintain the integrity of piping, tubing and fittings.

4182-08

Nu-Calgon 4297-75 Pipe-Dri is an aerosol insulation which provides a moisture barrier to stop sweating and dripping on refrigeration lines, air conditioning lines, and other cold surfaces. Quickly adheres and dries to a hard water proof coating. Pipe-Dri's spray pattern permits spraying of odd shaped fittings and makes it possible to insulate hard to reach areas. Sweating and dripping are eliminated by this durable, waterproof protective barrier. It separates the warm moist air and the cold surface, preventing condensation from occurring. Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of 1" water pipe or eight square feet of flat surface area with two coats. Ideally, the product should be at room temperature (70- 75 deg F) and the surface to be coated at a lower temperature. A thick application is hard to form on warmer surfaces (above 80 deg F), however, a thicker coat may be achieved by applying 2 or more light coats. Once a coating has been allowed to dry and harden, it will be stable at temperatures up to 120 deg F.

4297-75

Nu-Calgon 4297-76 Pipe-Dri Spray Insulation

Pipe-Dri is an aerosol insulation which provides a moisture barrier to stop sweating and dripping on refrigeration lines, air conditioning lines, and other cold surfaces. Quickly adheres and dries to a hard water proof coating. Pipe-Dris spray pattern permits spraying of odd shaped fittings and makes it possible to insulate hard to reach areas.

This product is ideal for providing a moisture barrier for refrigeration and air conditioning lines, and cold water pipes, etc. Sweating and dripping are eliminated by this durable, waterproof protective barrier. It separates the warm moist air and the cold surface, preventing condensation from occurring. Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of one inch water pipe or eight square feet of flat surface area with two coats.

Ideally, the product should be at room temperature (70-75°F) and the surface to be coated at a lower temperature. A thick application is hard to form on warmer surfaces (above 80°F); however, a thicker coat may be achieved by applying 2 or more light coats. Once a coating has been allowed to dry and harden, it will be stable at temperatures up to 120°F.

Nu-Calgon 4126-38 Bio-Fresh cd 4126-38 Bacteriastat Deodorizer, 1 Gallon Bottle, Bio-fresh cd is a ready-to-use bacteriostat, fungistat and deodorizer based upon chlorine dioxide technology. It is recommended for control of bacteria, mold, mildew, fungi and yeast in IAQ applications. Its EPA registration includes application in HVACR ventilating equipment, including coils, condensate pans, filters and duct-work.

Nu-Calgon 4126-38

Nu-Calgon 4150-01 Mini-Split Clean Wall Guard Medium 12K Units

Nu-Calgon 4150-01