Nu-Calgon PanPads 4295-34 Condensate Pan Treatment, 3/4 oz, Light Brown Contents

• Integral part of the clean coil program
• Treats up to 5 Ton
• Control slime build-up, eliminating overflow of condensate pans
• Control the growth of harmful bacteria, including those causing legionnaire's disease
• Eliminate objectionable or musty odors caused by bacterial slime build-upSid Harvey Item #:4295-34: Replaces Part #:'s : B14-297,
  
  ,
  

  Nu-Calgon 4295-34

The product is a quaternary-based biocide, formulated in tablet form and enclosed in a plastic housing which in turn is sealed ultrasonically to an absorbent white filter pad. Water is absorbed by the pad and wicked to the tablet, resulting in the immediate, but controlled, release of the powerful biocide. PanPads can be used in any condensate pan arrangements, either horizontally or vertically. Their low profile fits most pan configurations, and they last three months or more. Formulated buffering agents help protect pan against corrosion. When used as part of the Clean Coil Program, equipment is assured of optimum performance at the lowest possible energy cost. Air conditioning and refrigeration evaporator or cooling coils cool the air that is brought across them. In the process, moisture can be removed from the air, resulting in condensate. This condensate is collected in the condensate pan and drained away. Without proper treatment, bacteria can begin to grow in the pan, clogging the drain hole and resulting in overflow. In addition, this bacteria can also cause musty odors as well as respiratory ailments, contributing to an indoor air quality (IAQ) problem. Use of PanPads kills this bacteria, preventing these problems.

• Ideal for all air conditioning and refrigeration condensate applications
• Control slime build-up, eliminating overflow of condensate pans
• Control the growth of harmful bacteria, including those causing legionnaire's disease
• Eliminate objectionable or musty odors caused by bacterial slime build up
• Integral part of the clean coil program

Sid Harvey Item #:4295-36: Replaces Part #:'s : 32699,
,

Nu-Calgon 4295-36

Nu-Calgon 4350-04 Seal lock Thread Sealant 4 oz,
,

Nu-Calgon 4350-04

IMS-III is an economical sanitizer that eliminates odors and slime build-up in all ice machines. This product is a sanitizer designed for general use, in ice machines, ice cream dispensing equipment and other food dispensing equipment. Sanitize previously cleaned and rinsed non-porous food contact surfaces prepare 200 ppm active quaternary solution by adding 1.6 fl-oz of this product to 1 Gallon of water (8 oz per 5 Gallon of water).Sanitize ice machines, ice cream dispensing equipment and other food processing equipment, flood the area with solution, making sure to wet all surfaces completely for at least 60 sec. No rinsing is necessary; air dry and continue with equipment processing. Prepare a fresh solution for each use.,
,

Nu-Calgon 4211-34

Thermo-Trap Gel's unique formula provides a protective barrier from open flames and heat that are present during soldering and brazing. The gel works as a shield that protects the surface from melting or burning. When finished, the remaining gel is easily wiped up and leaves no residue or stain. the gel is not a heat sink, but a protective barrier. Product may need to be added more than once if subjected to open flames for a longer duration. Drywall, wood joists, or other areas are not damaged from the open flames. Apply to drywall, wood joists, wiring or other surfaces before brazing or soldering to protect them from the open flame. Protect adjacent surface areas from over-heating or damage prior to welding, brazing or soldering. Use to cool down heated surfaces. Prevent fires in adjacent areas when welding, brazing or soldering.

• Forms a protective barrier to keep flames or heat from damaging areas beyond direct work surface
• Protects drywall, wiring, joists, and other surrounding areas that a flame could also come in contact with
• Adheres to all surfaces without staining
• Viscous formula will not run or melt
• Harmless to skin and clothing
• Will not stain work surfaces
• Cleans up easily
• Odorless and biodegradable
• Protect adjacent surface areas from over-heating or damage prior to welding, brazing or soldering
• Cool down heated surfaces
• Less than 95% solubility

,
,

Nu-Calgon 4371-53

The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with base fluids that are specifically formulated to deliver optimum performance with minimal additive levels. The requirements of today's refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC's and HCFC's as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.

• Fully formulated polyol ester lubricant
• OEM-approved, including Copeland approved RL32-3MAF
• Compatible with mineral oils, alkylbenzenes and PAG's
• Metal can

,
,

Nu-Calgon 4318-66

A specially formulated chemistry in an easy-to-use packaging. It is tailored for the annual cleaning of residential and light commercial outdoor air conditioning coils. The metal safe, low-foaming biodegradable formula rapidly emulsifies dirt and grime so the system continues to run efficiently, lowering operating costs and increasing system longevity. The value to clean coils and the product's effective simplicity make it a must-have for technicians in preventative maintenance programs with residential and light commercial applications.

• Easy to use - simply connect to hose, clean and rinse
• Restores system efficiency by rapidly emulsifying insulating soils from outdoor coil
• A must have for any clean and check preventative maintenance program
• Cleans where water alone is ineffective
• Metal safe, biodegradable chemistry
• 1-bottle cleans up to (3) 5 Ton coils
• No sprayer required: eliminating sprayer prep time and cost of sprayer maintenance

,
,

Nu-Calgon 4372-24

Nu-Calgon 4383-34 Vacuum Pump Oil 1 Pint,
,

Nu-Calgon 4383-34

FVC68D Refrigeration Polyvinyl Ether Lubricant, 1 qt Can, Clear and Colorless PVE or polyvinyl ether lubricants are finding increased application and use by compressor and equipment manufacturers. The list of OEMs that have tested and approved Idemitsus PVE Lubricants is impressive. PVE lubricants exhibit excellent performance characteristics in air conditioning and refrigeration applications, and they are particularly well suited for use with HFC refrigerants such as R134A, R-404, R-407C, and R-410A. In fact, PVE lubricants are compatible with all HFC refrigerants. In addition to its solubility and miscibily characteristics, the PVE lubricant provides for increased stability and lubrication. In particular, PVE lubricants do not hydrolyze in the presence of moisture, a very important feature in HVAC/R applications. Additionally, they are compatible with other refrigeration oils and process fluids. PVE lubricants also exhibit compatibility and performance with frequently used anti-wear additives.,
,

Nu-Calgon 4319-24

Nu-Calgon Nu-Blast 4290-75 Condenser Coil Cleaner, 18 oz Aerosol Can, A"no rinse required" condenser coil cleaner in a convenient aerosol package. Double action of high pressure blast and solvent cleaning restores design efficiency of condenser coils quickly and easily. It is non-flammable and non-conductive with no rinse required, as the cleaning solvent evaporates completely. This high performance aerosol product offers maximum cleaning of condenser coils. The high solvency formula and blasting nozzle powerfully separates the undesirable materials from the surface. Only use with adequate ventilation.Sid Harvey Item #:4290-75: Replaces Part #:'s : 4768,
,

Nu-Calgon 4290-75

Nu-Calgon 4371-75 Tri-Pow'R Aerosol 19 oz AEROSOL,
,

Nu-Calgon 4371-75