Home  > ADVANCED DISTRIBUTOR PRODUCTS(x)
View:
ADP Healthy Solutions HE31124A130A000453 Galvanized Steel Indoor Left-Hand Uncased Evaporator Coil, 2 ton, 24,000 BTU/hr
  • High efficiency lanced fin design, R-22, R-410A, AC and heat pump compatible
  • All coils have durable packaging with bar coded labels on the box
  • Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air
  • Piston options include externally accessible body for easy piston change out and/or TXV installation
  • Microban antimicrobial additive to inhibit the growth of mold and mildew in the drain pan
  • UV resistant drain pans are molded of high temperature 450 deg F engineered polymer
  • Dual 3/4 " FPT condensate drains on front-left and front-right side of drain pans
  • Patented hydroTEC low water retention drain pan
  • Copper refrigerant connections for easy brazing on both copper and aluminum slab models
  • Intertek lab tested 1% or less cabinet air leakage for better efficiency
  • Cased coil cabinets are fully lined with 5/8 " foil faced insulation
  • Short cabinet and non-captive refrigerant lines with long stubs make for easy installation
  • Enhanced refrigerant pipe grommets secure, tight, and easy to install
  • Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV
  • Expansion valve with improved temperature sensing
  • Cabinet insulation hold down tabs for easy drain pan removal
  • Interlocking doors reduce air leakage and allow for easy access
  • Foam drain seal for reduced air leakage
  • Corrosion resistant coil header plates
  • All a-coils are up flow or down flow capable
  • Copper slab and piston as metering device
  • Uncased cabinet upper notch
  • 5 years warranty
Item#:
HE31124A130A000453
Manufacturer Item:
HE31124A130A000453
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP Healthy Solutions HE32130A155A000459 Galvanized Steel Indoor Left-Hand
Item#:
HE32130A155A000459
Manufacturer Item:
HE32130A155A000459
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP Healthy Solutions HH58636A225 Embossed Indoor Non-Bleed Cased H Evaporator Coil with TXV Metering, 3 ton, 36000 BTU/hr
  • High efficiency lanced fin design
  • All coils have durable packaging with bar coded labels on the box
  • Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs and then charged with dry air
  • Piston options include externally accessible body for easy piston change out and/or TXV installation
  • Microban anti-microbial additive to inhibit the growth of mold and mildew in the drain pan
  • UV resistant drain pans are molded of high temperature 450 deg F engineered polymer
  • Cased coil cabinets are fully lined with 5/8" foil faced insulation
  • Non-captive refrigerant lines with long stubs make for easy installation
  • Copper distributor tube assembly provides brass to brass threads for trouble free service of TXV
  • Corrosion resistant coil header plates
  • 5 years limited warranty
  • Non bleed air conditioner TXV (R-410A)
Item#:
HH58636A225
Manufacturer Item:
HH58636A225
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP Healthy Solutions HE31124A155A000453 Galvanized Embossed Steel Left-Hand Uncased Premier Indoor Evaporator Coil for HE Series Low Height Furnace, 2 ton, 24,000 BTU/hr, 15-1/2 " W
  • High efficiency lanced fin design, R-22, R-410A, AC and heat pump compatible
  • All coils have durable packaging with bar coded labels on the box
  • Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air
  • Piston options include externally accessible body for easy piston change out
  • Microban antimicrobial additive to inhibit the growth of mold and mildew in the drain pan
  • UV resistant drain pans are molded of high temperature 450 deg F engineered polymer
  • Dual 3/4 " FPT condensate drains on front-left and front-right side of drain pans
  • Patented HydroTEC low water retention drain pan
  • Copper refrigerant connections for easy brazing on both copper and aluminum slab models
  • Intertek lab tested 1% or less cabinet air leakage for better efficiency
  • Cased coil cabinets are fully lined with 5/8 " foil faced insulation
  • Short cabinet and non-captive refrigerant lines with long stubs make for easy installation
  • Enhanced refrigerant pipe grommets secure, tight and easy to install
  • Expansion valve with improved temperature sensing
  • Cabinet insulation hold down tabs for easy drain pan removal
  • Interlocking doors reduce air leakage and allow for easy access
  • Foam drain seal for reduced air leakage
  • Corrosion-resistant coil header plates
  • All A-coils are upflow or downflow capable
  • Copper slab and piston as metering device
  • Uncased cabinet upper notch
  • 5 years warranty
Item#:
HE31124A155A000453
Manufacturer Item:
HE31124A155A000453
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP Healthy Solutions HE33136A155A000467 Galvanized Steel Indoor Left-Hand Uncased Evaporator Coil, 3 ton, 36,000 BTU/hr
  • High efficiency lanced fin design, R-22, R-410A, AC and heat pump compatible
  • All coils have durable packaging with bar coded labels on the box
  • Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air
  • Piston options include externally accessible body for easy piston change out and/or TXV installation
  • Microban antimicrobial additive to inhibit the growth of mold and mildew in the drain pan
  • UV resistant drain pans are molded of high temperature 450 deg F engineered polymer
  • Dual 3/4 " FPT condensate drains on front-left and front-right side of drain pans
  • Patented hydroTEC low water retention drain pan
  • Copper refrigerant connections for easy brazing on both copper and aluminum slab models
  • Intertek lab tested 1% or less cabinet air leakage for better efficiency
  • Cased coil cabinets are fully lined with 5/8 " foil faced insulation
  • Short cabinet and non-captive refrigerant lines with long stubs make for easy installation
  • Enhanced refrigerant pipe grommets secure, tight, and easy to install
  • Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV
  • Expansion valve with improved temperature sensing
  • Cabinet insulation hold down tabs for easy drain pan removal
  • Interlocking doors reduce air leakage and allow for easy access
  • Foam drain seal for reduced air leakage
  • Corrosion resistant coil header plates
  • All a-coils are up flow or down flow capable
  • Copper slab and piston as metering device
  • Uncased cabinet upper notch
  • 5 years warranty
Item#:
HE33136A155A000467
Manufacturer Item:
HE33136A155A000467
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP Healthy Solutions HE32130A130A000459 Galvanized Embossed Steel Left-Hand Uncased Premier Indoor Evaporator Coil for HE Series Low Height Furnace, 2.5 ton, 30,000 BTU/hr, 13 " W
  • High efficiency lanced fin design, R-22, R-410A, AC and heat pump compatible
  • All coils have durable packaging with bar coded labels on the box
  • Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air
  • Piston options include externally accessible body for easy piston change out
  • Microban antimicrobial additive to inhibit the growth of mold and mildew in the drain pan
  • UV resistant drain pans are molded of high temperature 450 deg F engineered polymer
  • Dual 3/4 " FPT condensate drains on front-left and front-right side of drain pans
  • Patented HydroTEC low water retention drain pan
  • Copper refrigerant connections for easy brazing on both copper and aluminum slab models
  • Intertek lab tested 1% or less cabinet air leakage for better efficiency
  • Cased coil cabinets are fully lined with 5/8 " foil faced insulation
  • Short cabinet and non-captive refrigerant lines with long stubs make for easy installation
  • Enhanced refrigerant pipe grommets secure, tight and easy to install
  • Expansion valve with improved temperature sensing
  • Cabinet insulation hold down tabs for easy drain pan removal
  • Interlocking doors reduce air leakage and allow for easy access
  • Foam drain seal for reduced air leakage
  • Corrosion-resistant coil header plates
  • All A-coils are upflow or downflow capable
  • Copper slab and piston as metering device
  • Uncased cabinet upper notch
  • 5 years warranty
Item#:
HE32130A130A000459
Manufacturer Item:
HE32130A130A000459
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP M36E342 Manufactured Housing Uncased Evaporator Coil, 1.5 - 3.5 ton,
Item#:
M36E342
Manufacturer Item:
M36E342
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP Healthy Solutions HE33136A200A000467 Galvanized Embossed Steel Left-Hand Uncased Premier Indoor Evaporator Coil for HE Series Low Height Furnace, 3 ton, 36000 BTU/hr, 20" W
  • High efficiency lanced fin design, R-22, R-410A, AC and heat pump compatible
  • R-22, R-410A, AC and heat pump compatible
  • All coils have durable packaging with bar coded labels on the box
  • Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs and then charged with dry air
  • Piston options include externally accessible body for easy piston change out
  • Microban anti-microbial additive to inhibit the growth of mold and mildew in the drain pan
  • UV resistant drain pans are molded of high temperature 450 deg F engineered polymer
  • Dual 3/4" FPT condensate drains on front-left and front-right side of drain pans
  • Patented hydroTEC low water retention drain pan
  • Copper refrigerant connections for easy brazing on both copper and aluminum slab models
  • Intertek lab tested 1% or less cabinet air leakage for better efficiency
  • Cased coil cabinets are fully lined with 5/8" foil faced insulation
  • Short cabinet and non-captive refrigerant lines with long stubs make for easy installation
  • Enhanced refrigerant pipe grommets secure, tight and easy to install
  • Copper distributor tube assembly provides brass to brass threads for trouble free service of TXV
  • Expansion valve with improved temperature sensing
  • Cabinet insulation hold down tabs for easy drain pan removal
  • Interlocking doors reduce air leakage and allow for easy access
  • Foam drain seal for reduced air leakage
  • Corrosion resistant coil header plates
Item#:
HE33136A200A000467
Manufacturer Item:
HE33136A200A000467
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP Healthy Solutions HE351A48A200A000476 Embossed Galvanized Steel Indoor Premier Left-Hand Uncased Evaporator Coil, 3 - 4 ton, 48000 BTU/hr
  • High efficiency lanced fin design, R-22, R-410A, AC and heat pump compatible
  • R-22, R-410A, AC and heat pump compatible
  • All coils have durable packaging with bar coded labels on the box
  • Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs and then charged with dry air
  • Piston options include externally accessible body for easy piston change out and/or TXV installation
  • Microban anti-microbial additive to inhibit the growth of mold and mildew in the drain pan
  • UV-resistant drain pans are molded of high temperature 450 deg F engineered polymer
  • Dual 3/4" FPT condensate drains on front-left and front-right side of drain pans
  • Patented hydroTEC low water retention drain pan
  • Copper refrigerant connections for easy brazing on both copper and aluminum slab models
  • Intertek lab tested 1% or less cabinet air leakage for better efficiency
  • Cased coil cabinets are fully lined with 5/8" foil faced insulation
  • Short cabinet and non-captive refrigerant lines with long stubs make for easy installation
  • Enhanced refrigerant pipe grommets secure, tight and easy to install
  • Copper distributor tube assembly provides brass to brass threads for trouble free service of TXV
  • Expansion valve with improved temperature sensing
  • Cabinet insulation hold down tabs for easy drain pan removal
  • Interlocking doors reduce air leakage and allow for easy access
  • Foam drain seal for reduced air leakage
  • Corrosion-resistant coil header plates
Item#:
HE351A48A200A000476
Manufacturer Item:
HE351A48A200A000476
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP Healthy Solutions HE48160A200A000493 Galvanized Embossed Steel Left-Hand Uncased Premier Indoor Evaporator Coil for HE Series Low Height Furnace, 5 ton, 60000 BTU/hr, 20" W
  • High efficiency lanced fin design, R-22, R-410A, AC and heat pump compatible
  • R-22, R-410A, AC and heat pump compatible
  • All coils have durable packaging with bar coded labels on the box
  • Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs and then charged with dry air
  • Piston options include externally accessible body for easy piston change out
  • Microban anti-microbial additive to inhibit the growth of mold and mildew in the drain pan
  • UV resistant drain pans are molded of high temperature 450 deg F engineered polymer
  • Dual 3/4" FPT condensate drains on front-left and front-right side of drain pans
  • Patented hydroTEC low water retention drain pan
  • Copper refrigerant connections for easy brazing on both copper and aluminum slab models
  • Intertek lab tested 1% or less cabinet air leakage for better efficiency
  • Cased coil cabinets are fully lined with 5/8" foil faced insulation
  • Short cabinet and non-captive refrigerant lines with long stubs make for easy installation
  • Enhanced refrigerant pipe grommets secure, tight and easy to install
  • Copper distributor tube assembly provides brass to brass threads for trouble free service of TXV
  • Expansion valve with improved temperature sensing
  • Cabinet insulation hold down tabs for easy drain pan removal
  • Interlocking doors reduce air leakage and allow for easy access
  • Foam drain seal for reduced air leakage
  • Corrosion resistant coil header plates
Item#:
HE48160A200A000493
Manufacturer Item:
HE48160A200A000493
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP Healthy Solutions HE351A48A170A000476 Embossed Galvanized Steel Indoor Premier Left-Hand Uncased Evaporator Coil, 3 - 4 ton, 48000 BTU/hr
  • High efficiency lanced fin design, R-22, R-410A, AC and heat pump compatible
  • R-22, R-410A, AC and heat pump compatible
  • All coils have durable packaging with bar coded labels on the box
  • Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs and then charged with dry air
  • Piston options include externally accessible body for easy piston change out and/or TXV installation
  • Microban anti-microbial additive to inhibit the growth of mold and mildew in the drain pan
  • UV-resistant drain pans are molded of high temperature 450 deg F engineered polymer
  • Dual 3/4" FPT condensate drains on front-left and front-right side of drain pans
  • Patented hydroTEC low water retention drain pan
  • Copper refrigerant connections for easy brazing on both copper and aluminum slab models
  • Intertek lab tested 1% or less cabinet air leakage for better efficiency
  • Cased coil cabinets are fully lined with 5/8" foil faced insulation
  • Short cabinet and non-captive refrigerant lines with long stubs make for easy installation
  • Enhanced refrigerant pipe grommets secure, tight and easy to install
  • Copper distributor tube assembly provides brass to brass threads for trouble free service of TXV
  • Expansion valve with improved temperature sensing
  • Cabinet insulation hold down tabs for easy drain pan removal
  • Interlocking doors reduce air leakage and allow for easy access
  • Foam drain seal for reduced air leakage
  • Corrosion-resistant coil header plates
Item#:
HE351A48A170A000476
Manufacturer Item:
HE351A48A170A000476
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
ADP Healthy Solutions HE34142A155A000473 Galvanized Embossed Steel Left-Hand Uncased Premier Indoor Evaporator Coil for HE Series Low Height Furnace, 3.5 ton, 42,000 BTU/hr, 15-1/2 " W
  • High efficiency lanced fin design, R-22, R-410A, AC and heat pump compatible
  • All coils have durable packaging with bar coded labels on the box
  • Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air
  • Piston options include externally accessible body for easy piston change out
  • Microban antimicrobial additive to inhibit the growth of mold and mildew in the drain pan
  • UV resistant drain pans are molded of high temperature 450 deg F engineered polymer
  • Dual 3/4 " FPT condensate drains on front-left and front-right side of drain pans
  • Patented HydroTEC low water retention drain pan
  • Copper refrigerant connections for easy brazing on both copper and aluminum slab models
  • Intertek lab tested 1% or less cabinet air leakage for better efficiency
  • Cased coil cabinets are fully lined with 5/8 " foil faced insulation
  • Short cabinet and non-captive refrigerant lines with long stubs make for easy installation
  • Enhanced refrigerant pipe grommets secure, tight and easy to install
  • Expansion valve with improved temperature sensing
  • Cabinet insulation hold down tabs for easy drain pan removal
  • Interlocking doors reduce air leakage and allow for easy access
  • Foam drain seal for reduced air leakage
  • Corrosion-resistant coil header plates
  • All A-coils are upflow or downflow capable
  • Copper slab and piston as metering device
  • Uncased cabinet upper notch
  • 5 years warranty
Item#:
HE34142A155A000473
Manufacturer Item:
HE34142A155A000473
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
View: