Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Fieldpiece Instruments offers several test lead solutions specifically designed for the way HVAC technicians test in the field. Our detachable probe tip silicone test leads allow you to plug one probe tip directly into the top of our stick meter, attach an alligator clip extension tip onto the COM (common lead), and test with one hand, safely and easily. Add the red alligator extension to the volts lead to perform a"no-hands" test. We also offer spring loaded test lead kits, silicone test leads, shorting cables, and a flame diode adapter kit with mini-plug adapter. Just added to our test lead line is the RCT2 extended probe tip set that allows you to test connector plugs without dismantling the connector plug as well as hard to reach test points often found on tightly packed mini-split systems. It comes in the ADK7 deluxe silicone test lead kit.

The ATB1, K-type bead thermocouple is used to take temperatures of air, surfaces, or liquids up to 4 deg F. Use the ATB1 for outdoor dry bulb temperatures when finding target superheat. The ATB1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple. The wrap-tab allows the thermocouple wire to conveniently store on the plug. Just wrap the excess wire around the wrap-tab and feed it through one of the eyes. Keep a few of them set at different lengths for fast, job-specific, switching between thermocouples. No more tangled messes in your tool bag.

• Plus/Minus 4 deg F (2 deg C), Plus/Minus 1 deg F (.5 deg C) after field calibration, 32 - 176 deg F ( to 8 deg C) accuracy
• Calibration and atmosphere will affect maximum useful temperature in applications
• The wire insulation is designed to withstand a maximum continuous use at 4 deg F probe insulation
• K-type thermocouple male mini plug

The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers' specification, so there's no need to carry a large variety of pressure switches on your truck. The Dual Port Manometer has the ranges to measure gas pressure and the resolution needed to measure static pressure. Ideal for HVACR field service technicians, the SDMN6 can determine if the gas pressure coming into the house or out of the regulator are correct. The SDMN6 measures gas pressure up to 60" WC with a resolution of 0.1" WC. In addition, the unit measures both positive and negative pressure, which is used for measurement on vacuum control lines. The unit will take differential pressure readings and display the difference between P1 and P2 at all times in the lower right corner of the easy-to-read LCD. Four different measurement scales can be used:"es of water column, millimeters of water column, Mbars, and PSI. The SDMN6 also has a zero adjust to zero out the meter in different ambient pressures. It has a hold button to hold the currently displayed reading. The auto-power-off function conserves battery life, but can be disabled if desired. In the static pressure mode, the unit can measure up to 2" WC with resolution to 0.010" WC, which enables a technician to measure small differences in air (or static) pressure.

For real-time, instant readings techs use everyday, this pocket digital psychrometer is a must have for every HVACR professional. Wet bulb, dry bulb, dew point, and %RH are shown on the backlight, dual display, and measurements can be taken either in the duct, or while walking around.

• Clip it to your pocket just like a pen
• Narrow tip for insertion into ductwork
• Twist cap protects sensors when not in use
• Bright backlight
• Hold, max, min (HOLD, M/m)
• Press on/off for 3 sec to power on or off
• HI or LO will show if measurement is out of range
• Lo battery is displayed when below operating voltage
• Twist bottom chrome cap to change the AA battery
• Backlight activates on any button press
• Press hold/M/m for 1 sec to exit mode
• Toggle deg F and deg C with a pin through hole on back
• Press hold/M/m and on/off together for 3 sec to disable auto-off (APO)
• 3/8" diameter x 2" tip probe length
• .1 deg F resolution
• 165 hr typical alkaline battery life
• 1 min auto-off

Fieldpiece Instruments SRS3 Heavy Duty Premium Performance Wireless Fieldpiece's SRS2C Wireless Refrigerant Scale is the only scale of its kind. The SRS2C delivers accurate measurements in a heavy duty design and eliminates clumsy wires that normally connect the display to the scale platform. The SRS2C features a wireless remote with a bright blue backlight and a flip-up magnetic hat for easy reading. The heavy duty platform is constructed of solid aluminum with rugged rubber bumpers. A recessed tank cradle and diamond plate pad hold refrigerant cylinders firmly. The remote stores conveniently in the bottom of the platform. The SRS2C features push butTon zeroing (tare) and syncing between the remote and the platform and a 33 feet range.

The newly designed SPK2 folding pocket thermometer is great for taking quick air temperatures. It fits directly in your pocket so you're ready for common temperature checking. The folding rod has a hanging hook so you can easily hang it in a duct or on a grille. The large display shows min/max/hold, has measurements in both fahrenheit and celsius, and has a low battery indicator. It also quickly calculates T1-T2, as well as features an auto power off function to save battery power on it's already phenomenal 8000 hr of battery life on one single AA battery.

• Hang on air registers or duct walls
• Large display
• Rod folds into body
• Auto off after 15 min
• Measuring range -58 to 392 deg F

Fieldpiece Instruments TC24 Type K Thermocouple Pipe Clamp, 3/8 - 1-3/8

Fieldpiece Instruments MR45 Digital Refrigerant Recovery Machine, 95 - 130

The SPK1 pocket knife style thermometer features a sharp tip for punching through flex duct and hangs easily from a vent or thermostat. Pull out the probe rod just like you would a pocket knife. 16 detent position grooves hold the rod at virtually at any angle. The probe rod folds away simply with no cover sleeve to lose. One of our most popular instruments for HVAC/R field service.

• Convenient probe tip protection and storage
• Easily fits in shirt pocket
• Easily hangs from vent or register
• Min/Max function
• Hold function
• Auto off after 10 min

The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. The SDMN5 measures pressure between -6inWC and 6inWC ("es of water column) and -15. to 15. mBar. The SDMN5 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of .1 in WC or .1 mBar. Includes 3/16 to 5/16 in adapter for measuring gas inlet and outlet pressures. The SDMN5 evolved as a result of testing pressures in the field for 2 years. Its range and resolution allow you to measure the HVAC applications you run into everyday in HVAC/R field service. Measure gas pressure on the inlet and outlets with the standard 3/16 in fittings or the included adapters for 5/16 in ports, take static pressure measurements across a blower and get the pressure differential with the push of a button to check drafts. Whether you're holding the ergonomic standalone shape in your hand or hang the SDMN5 on the unit with the magnetic hanger to fill out a work order, the SDMN5 make HVAC/R field service easier and faster, with less fatigue than the other guys.

• Measures duct pressures to balance air flow
• Resolution down to .1" WC for static pressure measurement
• .1" WC resolution
• 15 min auto power off
• Over range - OL or -OL is displayed
• 2 hr battery life with low battery LED indicator on displayed
• Battery - single standard 9 volt, NEDA 164, JIS 6P, IEC 6F22
• Compatible media - dry and non-corrosive gases
• SDMN5 Dual-Port Manometer, 2-3/16" Tubes with Brass Fittings, RMA316 2-3/16 - 5/16" Tube Adapters, 9 volt Battery (Installed), Operator's Manual, (2) 5/16" Adapters for Measuring Inlet and Outlet Pressures

Fieldpiece Instruments VP85 Vacuum Pump 8 CFM 2-Stage 115 VAC

Fieldpiece Instruments SC260 Compact Clamp Meter with True RMS, 600