Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary.

Venting kit for downflow (counter-flow) applications on B, C, and D cabinets where side discharge is not possible.

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Full length fold-up duct connector flanges for application flexibility.

Easy access to controls to connect power and control wiring.

No electrical knockouts to deal with, making installation easier.

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Front-facing screws on flame sensor and hot surgace ignitor for ease of service.

Front-facing screws on blower assembly for easy access and removal of blower.

Constant torque blower motor for cooling SEER2 enhancement.

Blower-off delay for cooling SEER2 improvement

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Blower-off delay for cooling SEER2 improvement

Easy access to controls to connect power and control wiring

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit current requirement for easy replacement application

All models are convertible to use propane (LP) gas.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety

Five-speed direct drive standard ECM blower motor

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling

Hi-tech tubular aluminized steel primary heat exchanger

Timed on, adjustable off blower capability for maximum comfort

Blower door safety switch

Solid removable bottom panel allows easy conversion for bottom return air applications

Low NOx models have been designed to meet specific code requirements.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions

No electrical knockouts to deal with, making installation easier

Fold-up duct connector flanges for application flexibility

Quiet inducer operation

Inducer rotates for easy conversion of venting options

Fully supported blower assembly for easy access and removal of blower

External air filters are used for maximum flexibility in meeting customers' indoor air quality (IAQ) needs.

Venting applications: install as a common vent with other gas-fired appliances or use a lined masonry chimney.

1/4 turn knobs are provided for easy independent door removal.

High-efficiency blower motor for lower electrical power usage and improved AC SEER2 ratings

Insulated blower compartment for thermal and acoustic performance

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Blower-off delay for cooling SEER2 improvement

Easy access to controls to connect power and control wiring

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit current requirement for easy replacement application

All models are convertible to use propane (LP) gas.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety

Five-speed direct drive standard ECM blower motor

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling

Hi-tech tubular aluminized steel primary heat exchanger

Timed on, adjustable off blower capability for maximum comfort

Blower door safety switch

Solid removable bottom panel allows easy conversion for bottom return air applications

Low NOx models have been designed to meet specific code requirements.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions

No electrical knockouts to deal with, making installation easier

Fold-up duct connector flanges for application flexibility

Quiet inducer operation

Inducer rotates for easy conversion of venting options

Fully supported blower assembly for easy access and removal of blower

External air filters are used for maximum flexibility in meeting customers' indoor air quality (IAQ) needs.

Venting applications: install as a common vent with other gas-fired appliances or use a lined masonry chimney.

1/4 turn knobs are provided for easy independent door removal.

High-efficiency blower motor for lower electrical power usage and improved AC SEER2 ratings

Insulated blower compartment for thermal and acoustic performance

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Blower-off delay for cooling SEER2 improvement

Easy access to controls to connect power and control wiring

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit current requirement for easy replacement application

All models are convertible to use propane (LP) gas.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety

Five-speed direct drive standard ECM blower motor

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling

Hi-tech tubular aluminized steel primary heat exchanger

Timed on, adjustable off blower capability for maximum comfort

Blower door safety switch

Solid removable bottom panel allows easy conversion for bottom return air applications

Low NOx models have been designed to meet specific code requirements.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions

No electrical knockouts to deal with, making installation easier

Fold-up duct connector flanges for application flexibility

Quiet inducer operation

Inducer rotates for easy conversion of venting options

Fully supported blower assembly for easy access and removal of blower

External air filters are used for maximum flexibility in meeting customers' indoor air quality (IAQ) needs.

Venting applications: install as a common vent with other gas-fired appliances or use a lined masonry chimney.

1/4 turn knobs are provided for easy independent door removal.

High-efficiency blower motor for lower electrical power usage and improved AC SEER2 ratings

Insulated blower compartment for thermal and acoustic performance

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Blower-off delay for cooling SEER2 improvement

Easy access to controls to connect power and control wiring

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit current requirement for easy replacement application

All models are convertible to use propane (LP) gas.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety

Five-speed direct drive standard ECM blower motor

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling

Hi-tech tubular aluminized steel primary heat exchanger

Timed on, adjustable off blower capability for maximum comfort

Blower door safety switch

Solid removable bottom panel allows easy conversion for bottom return air applications

Low NOx models have been designed to meet specific code requirements.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions

No electrical knockouts to deal with, making installation easier

Fold-up duct connector flanges for application flexibility

Quiet inducer operation

Inducer rotates for easy conversion of venting options

Fully supported blower assembly for easy access and removal of blower

External air filters are used for maximum flexibility in meeting customers' indoor air quality (IAQ) needs.

Venting applications: install as a common vent with other gas-fired appliances or use a lined masonry chimney.

1/4 turn knobs are provided for easy independent door removal.

High-efficiency blower motor for lower electrical power usage and improved AC SEER2 ratings

Insulated blower compartment for thermal and acoustic performance

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary.

Venting kit for downflow (counter-flow) applications on B, C, and D cabinets where side discharge is not possible.

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Full length fold-up duct connector flanges for application flexibility.

Easy access to controls to connect power and control wiring.

No electrical knockouts to deal with, making installation easier.

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Front-facing screws on flame sensor and hot surgace ignitor for ease of service.

Front-facing screws on blower assembly for easy access and removal of blower.

Constant torque blower motor for cooling SEER2 enhancement.

Blower-off delay for cooling SEER2 improvement

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary.

Venting kit for downflow (counter-flow) applications on B, C, and D cabinets where side discharge is not possible.

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Full length fold-up duct connector flanges for application flexibility.

Easy access to controls to connect power and control wiring.

No electrical knockouts to deal with, making installation easier.

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Front-facing screws on flame sensor and hot surgace ignitor for ease of service.

Front-facing screws on blower assembly for easy access and removal of blower.

Constant torque blower motor for cooling SEER2 enhancement.

Blower-off delay for cooling SEER2 improvement

Unique Manufactured Housing Design with a robust, 19 7/8"W, fully-insulated cabinet to fit the standard MH footprint. The MG2R is our flagship high-efficiency, HUD-compliant, gas furnace. AC-Ready 4-Ton ECM Blower with 5-speed taps, with/without a factory-installed 20"H coil box; allowing for a field-installed 20"/26"H coil box to suit your capacity and access needs. Refer to Split System sell sheets for AHRI-rated coil-fit matches. Quick LP Conversion with an easy-access gas valve regulator and manifold, using the factory-provided LP orifices included in the unit-literature kit. Category IV Venting Approval allows for vertical or horizontal direct venting using an approved non-metallic two-pipe system, or a concentric termination kit for application flexibility. Dependable Warranty and Support, handled directly by Style Crests dedicated HVAC Team, offering the most competitive warranty coverage and service in the Manufactured Housing Industry.

Nortek Global (Intertherm) MG2S045F2ABM1

Armstrong Air Conditioning 2-Stage Variable Speed Gas Furnace, 95% AFUE, 120 VAC, 44,000 BTU, 1200 cfm

• Aluminized steel design primary heat exchanger with crimped non welded construction
• AL 29-4C stainless steel secondary heat exchanger, non-welded crimped S-curve primary heat exchanger design for maximum durability
• Aluminized steel in shot burners for smooth ignition, isolated burner enclosure for quiet operation
• Standardized widths for easy coil fit, unitized construction for cabinet integrity
• Heat exchanger compartment is insulated to increase efficiency and reduce sound levels
• Efficient ECM variable speed blower motor
• Motor features soft start and soft stop for quiet operation
• Active and passive dehumidification feature
• Easily removable slide out blower design
• Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation
• 2-speed induced draft motor with stainless steel shaft, steel ball bearings and fan cooled for long life
• Direct vent refers to a combustion air supply intake pipe installed in conjunction with flue gas vent pipe
• Integrated ignition and fan control
• System sentry control retains last 5-fault codes with push butTon memory recall, regardless of power interruption
• Hot surface ignition system uses silicon nitride igniter
• Control circuit is fuse protected
• 2-stage thermostat is recommended when installed with 2-stage cooling unit
• Left or right gas and electric entry
• Certified for direct vent (2-pipe) or non-direct (1-pipe) applications
• 10 years limited parts warranty

,
,

Armstrong Air Conditioning 67W68

The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.

• Integrated coil cabinet for easy air conditioning installation
• Aluminized steel primary heat exchanger
• Stainless steel secondary heat exchanger
• Silicon nitride igniter for quiet and consistent light-off
• 2-piece top design for easy access to vent pipes
• Concentric vent kit available using existing roof jack and standard base
• PVC venting
• Lifetime heat exchanger warranty and 10 years parts warranty

  Thermo Pride CLQS1-100T48N