Say "Hello" to Savings
The BGH96 Furnaces two-stage gas valve switches between high and low fire settings to meet load demands, allowing for more efficient operation than single stage technology. This means enhanced comfort and energy savings for homeowners by converting up to 96% of the fuel purchased for heating.
Complete Heating & Cooling System
Complete your home HVAC system by integrating the Bosch BGH96 Furnace with Boschs IDS Outdoor Unit (BOVA) and Cased Coil (BMAC). Pairing with the Bosch IDS Heat Pump allows for heat pump system operation of up to 18 SEER. Installing a Bosch matched dual fuel system is the best choice to optimize savings, comfort, and efficiency.
Residential Limited Warranty* Replacement parts protection for up to 5 years and 20 years on the primary and secondary heat exchangers*. This offering covers all components incorporated into the unit at the time of manufacture. All other components or parts that are purchased from Bosch and installed in the field have a 1-year parts warranty. *Warranty is upgraded to 10 years on parts and limited lifetime on heat exchangers if the unit is properly registered within 60 days of installation. See warranty document for detailed terms and conditions.
Peace of Mind Comfort
Installing a Bosch matched dual fuel system is the best choice to optimize both savings and comfort. Bosch offers a complete dual fuel system with the Bosch Inverter Ducted Split (IDS) heat pump, Bosch BMAC Cased Coil, Bosch 96% Gas Furnace, and the Bosch Connected Control Thermostat

The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.

• Integrated coil cabinet for easy air conditioning installation
• Aluminized steel primary heat exchanger
• Stainless steel secondary heat exchanger
• Silicon nitride igniter for quiet and consistent light-off
• 2-piece top design for easy access to vent pipes
• Concentric vent kit available using existing roof jack and standard base
• PVC venting
• Lifetime heat exchanger warranty and 10 years parts warranty

  Thermo Pride CMA4-50D36N

The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.

• Integrated coil cabinet for easy air conditioning installation
• Aluminized steel primary heat exchanger
• Stainless steel secondary heat exchanger
• Silicon nitride igniter for quiet and consistent light-off
• 2-piece top design for easy access to vent pipes
• Concentric vent kit available using existing roof jack and standard base
• PVC venting
• Lifetime heat exchanger warranty and 10 years parts warranty

  Thermo Pride GMD2-80N

The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.

• Integrated coil cabinet for easy air conditioning installation
• Aluminized steel primary heat exchanger
• Stainless steel secondary heat exchanger
• Silicon nitride igniter for quiet and consistent light-off
• 2-piece top design for easy access to vent pipes
• Concentric vent kit available using existing roof jack and standard base
• PVC venting
• Lifetime heat exchanger warranty and 10 years parts warranty

  Thermo Pride CMA4-75D36N

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Blower-off delay for cooling SEER2 improvement

Easy access to controls to connect power and control wiring

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit current requirement for easy replacement application

All models are convertible to use propane (LP) gas.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety

Five-speed direct drive standard ECM blower motor

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling

Hi-tech tubular aluminized steel primary heat exchanger

Timed on, adjustable off blower capability for maximum comfort

Blower door safety switch

Solid removable bottom panel allows easy conversion for bottom return air applications

Low NOx models have been designed to meet specific code requirements.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions

No electrical knockouts to deal with, making installation easier

Fold-up duct connector flanges for application flexibility

Quiet inducer operation

Inducer rotates for easy conversion of venting options

Fully supported blower assembly for easy access and removal of blower

External air filters are used for maximum flexibility in meeting customers' indoor air quality (IAQ) needs.

Venting applications: install as a common vent with other gas-fired appliances or use a lined masonry chimney.

1/4 turn knobs are provided for easy independent door removal.

High-efficiency blower motor for lower electrical power usage and improved AC SEER2 ratings

Insulated blower compartment for thermal and acoustic performance

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary.

Venting kit for downflow (counter-flow) applications on B, C, and D cabinets where side discharge is not possible.

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Full length fold-up duct connector flanges for application flexibility.

Easy access to controls to connect power and control wiring.

No electrical knockouts to deal with, making installation easier.

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Front-facing screws on flame sensor and hot surgace ignitor for ease of service.

Front-facing screws on blower assembly for easy access and removal of blower.

Constant torque blower motor for cooling SEER2 enhancement.

Blower-off delay for cooling SEER2 improvement

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Blower-off delay for cooling SEER2 improvement

Easy access to controls to connect power and control wiring

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit current requirement for easy replacement application

All models are convertible to use propane (LP) gas.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety

Five-speed direct drive standard ECM blower motor

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling

Hi-tech tubular aluminized steel primary heat exchanger

Timed on, adjustable off blower capability for maximum comfort

Blower door safety switch

Solid removable bottom panel allows easy conversion for bottom return air applications

Low NOx models have been designed to meet specific code requirements.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions

No electrical knockouts to deal with, making installation easier

Fold-up duct connector flanges for application flexibility

Quiet inducer operation

Inducer rotates for easy conversion of venting options

Fully supported blower assembly for easy access and removal of blower

External air filters are used for maximum flexibility in meeting customers' indoor air quality (IAQ) needs.

Venting applications: install as a common vent with other gas-fired appliances or use a lined masonry chimney.

1/4 turn knobs are provided for easy independent door removal.

High-efficiency blower motor for lower electrical power usage and improved AC SEER2 ratings

Insulated blower compartment for thermal and acoustic performance

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Blower-off delay for cooling SEER2 improvement

Easy access to controls to connect power and control wiring

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit current requirement for easy replacement application

All models are convertible to use propane (LP) gas.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety

Five-speed direct drive standard ECM blower motor

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling

Hi-tech tubular aluminized steel primary heat exchanger

Timed on, adjustable off blower capability for maximum comfort

Blower door safety switch

Solid removable bottom panel allows easy conversion for bottom return air applications

Low NOx models have been designed to meet specific code requirements.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions

No electrical knockouts to deal with, making installation easier

Fold-up duct connector flanges for application flexibility

Quiet inducer operation

Inducer rotates for easy conversion of venting options

Fully supported blower assembly for easy access and removal of blower

External air filters are used for maximum flexibility in meeting customers' indoor air quality (IAQ) needs.

Venting applications: install as a common vent with other gas-fired appliances or use a lined masonry chimney.

1/4 turn knobs are provided for easy independent door removal.

High-efficiency blower motor for lower electrical power usage and improved AC SEER2 ratings

Insulated blower compartment for thermal and acoustic performance

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary.

Venting kit for downflow (counter-flow) applications on B, C, and D cabinets where side discharge is not possible.

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Full length fold-up duct connector flanges for application flexibility.

Easy access to controls to connect power and control wiring.

No electrical knockouts to deal with, making installation easier.

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Front-facing screws on flame sensor and hot surgace ignitor for ease of service.

Front-facing screws on blower assembly for easy access and removal of blower.

Constant torque blower motor for cooling SEER2 enhancement.

Blower-off delay for cooling SEER2 improvement

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary.

Venting kit for downflow (counter-flow) applications on B, C, and D cabinets where side discharge is not possible.

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Full length fold-up duct connector flanges for application flexibility.

Easy access to controls to connect power and control wiring.

No electrical knockouts to deal with, making installation easier.

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Front-facing screws on flame sensor and hot surgace ignitor for ease of service.

Front-facing screws on blower assembly for easy access and removal of blower.

Constant torque blower motor for cooling SEER2 enhancement.

Blower-off delay for cooling SEER2 improvement

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Blower-off delay for cooling SEER2 improvement

Easy access to controls to connect power and control wiring

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit current requirement for easy replacement application

All models are convertible to use propane (LP) gas.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety

Five-speed direct drive standard ECM blower motor

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling

Hi-tech tubular aluminized steel primary heat exchanger

Timed on, adjustable off blower capability for maximum comfort

Blower door safety switch

Solid removable bottom panel allows easy conversion for bottom return air applications

Low NOx models have been designed to meet specific code requirements.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions

No electrical knockouts to deal with, making installation easier

Fold-up duct connector flanges for application flexibility

Quiet inducer operation

Inducer rotates for easy conversion of venting options

Fully supported blower assembly for easy access and removal of blower

External air filters are used for maximum flexibility in meeting customers' indoor air quality (IAQ) needs.

Venting applications: install as a common vent with other gas-fired appliances or use a lined masonry chimney.

1/4 turn knobs are provided for easy independent door removal.

High-efficiency blower motor for lower electrical power usage and improved AC SEER2 ratings

Insulated blower compartment for thermal and acoustic performance