• Includes fixed 1/4" male quick-connects or color-coded lead wires for primary and secondary connections
• Includes metal end bells and butTon for manually resetting the breaker, 1/2-14 NPSM conduit connector and lock nut for mounting

Honeywell AT150F1022

• Includes butTon for manually resetting the circuit breaker and metal end bells
• Includes 1/2 (14) NPSM conduit connector and lock nut for mounting on plate or panel (not included) with 7/8" knockout and feet for surface mount

Honeywell AT150F1030

Honeywell BP900

• 2-way on-off low VAC age valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All model may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec nominal open timing
• Screw terminal block electric connection
• Spring return to close valve action
• No SPST auxiliary end switch
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• Buna-N (NBR) rubber plug
• Manual opener

Honeywell B163-5

• 2-way on-off low VAC age valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All model may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• The valve can be mounted in any position on a vertical line
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec nominal open timing
• Screw terminal block electric connection
• Spring return to close valve action
• No SPST auxiliary end switch
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• Buna-N (NBR) rubber plug
• Brass case, sector gears, stainless steel cover actuator

Honeywell B163-4

• Valves with action of spring return to close
• 4.4 amp running at 120 VAC , 50 VA pilot duty at 24 VAC auxiliary switch

Honeywell B163-7

• 2-way on-off low VAC age valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All model may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec nominal open timing
• Screw terminal block electric connection
• Spring return to close valve action
• No SPST auxiliary end switch
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• Buna-N (NBR) rubber plug

Honeywell B163-6

Honeywell B163-1

Honeywell B163-3

Honeywell B163-2

Honeywell CHWE41013

• Pressure actuated high limit, safety control for steam heating boilers, It breaks an electrical circuit to shut down the burner if steam pressure rises above a safe level
• Contains an SPST Micro switch snap-acting switch
• Sensitive pressure actuated diaphragm expands or contracts with pressure variations, moving a lever mechanism which operates the snap switch
• A screw on top of the case allows setpoint adjustment without removing the cover
• Differential is adjusted by means of a dial located inside the case
• Recommended minimum setpoint is differential setting plus 1-1/2 psi
• Stainless steel diaphragm sensor element
• Makes at setpoint on pressure fall breaks at setpoint plus differential on pressure rise

Honeywell C354