Conveniently place near sinks, washers, water heaters, sump pumpsanywhere leaks could happen. Battery life lasts up to 3 years without incident
• Notification messages can alert you or your family/ friends, wherever you are, while audible (100 dB alarm) alerts sound when you are at home
• Use to detect temperatures that can freeze pipes, and humidity that could damage valuables
• Runs on WiFi - No Extra Hub or hardware purchase required
• Daisy chain extra cable sensors and cover up to 500 feet of space with one leak detector
• Reusable even after detecting an incident
• After an alarm, simply wipe dry the detector and cable sensors and place them back into service
• There is a 5 years warranty for professionally installed devices
• Mounting - Insert the plug from the cable sensor into the cable sensor jack at the end of the previous cable sensor, repeat for additional cable sensors up to a limit of 500 feet of cable sensors
  
  

  HONEYWELL CHWES41013

Totally enclosed micro switch snap acting switches operate on temperature rise to setpoint
• Visible control point scale and external adjustments screw permit easy setting
• Horizontal insertion of the sensing element
• Direct/well immersion of the sensing element
• Remote buLbs. model may be used to sense air temperature in ducts and in outside air sensing applications
• Contacts break on temperature rise
• Screw terminals wiring
• Includes heat-conductive compound
  
  

  Honeywell C290

Honeywell C292

An immersion type liquid-filled sensing element actuates (2) snap switches
• (1) switch operates as a high limit control
• The other switch operates as a low limit and/or circulator control, depending on the model
• Controller may be mounted in any positioning and needs no leveling
• Separate, easy-to-read, calibrated dial and setpoint adjustments for each switch
• Differential adjustment on low limit or circulator switch on select models
• All adjustments accessible inside front cover
• Push-in terminals for quick connecting
• 1-sensing element for easy installation
• (2) SPST snap switches act independently at respective temperature settings
• 3" insulation depth
• 360 VA transformer load ignition electrical ratings
• High limit, low limit and/or circulator controllers used to regulate boiler water temperature in gas- or oil-fired hydronic heating systems
  
  

  Honeywell C322-4A

• Totally enclosed micro switch snap-acting switches operate on temperature rise to setpoint
• Visible control point scale and external adjustments screw permit easy setting
• Horizontal or vertical insertion of the sensing element
• Remote buLbs. model may be used to sense air temperature in ducts and in outside air sensing applications
• Direct or well immersion of the sensing element
• Includes heat-conductive compound, well adapter Honeywell L4006E1067 High Limit Manual Reset Aquastat, 130 - 270 deg F, 10 - 25 deg F Differential
  
  

  Honeywell C290-6

Resideo C335-2

• Immersion-type controllers that combine high limit protection with switching relay control of burner and circulator motors
• High limit opens burner circuit only
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• 1-1/2 - 3" depth less well insulation
• Electrical burner rating: at full load: 7.4 amp at 120 VAC, 3.7 amp at 240 VC; at locked rotor: 44.4 amp at 120 VAC, 22.2 amp at 240 VAC; millivolt: 0.25 amp at 1/4 - 12 VDC
• Electrical circulator rating: at full load: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC; at locked rotor: 44.4 amp at 120 VAC, 22.2 amp at 240 VAC Honeywell L8148J1009/U Aquastat Relay, 120 VAC at 60 Hz, SPST, 120 - 240 deg F High Limit, 8 deg F Fixed Differential
  
  

  Honeywell C312-9

Honeywell C312-8

Totally enclosed micro switch snap acting switches operate on temperature rise to setpoint
• Visible control point scale and external adjustments screw permit easy setting
• Horizontal insertion of the sensing element
• Direct/well immersion of the sensing element
• Remote buLbs. model may be used to sense air temperature in ducts and in outside air sensing applications
• Contacts make on temperature rise
• Screw terminals wiring
  
  

  Honeywell C290-1A

HONEYWELL C322-4

Honeywell C345-2

Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems, including domestic hot water service
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• Include diaphragm powerhead and micro Switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Electrical burner rating: at full load: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC line voltage; at locked rotor: 44.4 amp at 120 VAC, 22.7 amp at 240 VAC line voltage
• Electrical circulator rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor
• 1-1/2" depth insulation
  
  

  Honeywell C317-5