Nu-Calgon Emkarate 4316-46 Refrigeration Lubricant, 1 Gallon Can, Mild, The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with base fluids that are specifically formulated to deliver optimum performance with minimal additive levels. The requirements of today's refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC's and HCFC's as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.,
,

Nu-Calgon 4314-66

The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with base fluids that are specifically formulated to deliver optimum performance with minimal additive levels. The requirements of today's refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC's and HCFC's as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.

• Fully formulated polyol ester lubricant
• OEM-approved, including Copeland approved RL32-3MAF
• Compatible with mineral oils, alkylbenzenes and PAG's
• Metal can

,
,

Nu-Calgon 4316-46

RectorSeal 94392 Premium Thread Cutting Oil, 1 qt Bottle, Amber, RectorSeal premium thread cutting oil is designed to reduce friction, be an effective coolant and anti-weld agent, and act as an extreme pressure lubricant during thread cutting operations. Dark cutting oil reduces friction and acts as an effective coolant and anti-weld agent during hand thread cutting operations and when using low RPM machines.,
,

Nu-Calgon 4319-24

BVA RPOE170 Polyolester Refrigeration Oil, 5 Gallon, Clear to Yellow

• Negligible solubility in water

Virginia F49

The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with base fluids that are specifically formulated to deliver optimum performance with minimal additive levels.Sid Harvey Item #:4314-46: Replaces Part #:'s : B81-406,
,

Copeland Parts 998E02201

Features:

Factory Tested

Probe Type Low Water Cutoff

Swing-away burner door

Top access cleanout cover

Plug-in wiring harness

High efficiency oil burner

Solenoid valve

PSC motor

Solid state ignitor

Rear flue outlet, Top flue available with optional kit

Cast iron sections

Insulated heavy-gauge steel jacket

Tankless heater option

williamson -thermoflo osb-3-p-s3

ECR International SBO310521700103 Oil Fired Cast Iron Steam Boiler 147K BTU Input 125K BTU Output, 396 Square Feet, 85% AFUE (Less Burner)

• Dependable Cast Iron Heat Exchanger
• Honeywell Pressure Control, Boiler Water Level Gauge Glass, and Steam Pressure Gauge
• Hydrolevel Electronic Low Water Cut Off
• Atmospheric Chimney Vent Boiler
• Textured paint Jacket with compact footprint
• Cast Iron swing door and large flueways allow for easy cleaning and servicing.
• Features a Beckett Burner in a Box Kit that is quick and easy to mount and has a plug-in harness. Makes moving the boiler down a stairway easier.
• Optional Tankless Domestic Hot Water Coil Kits
• The Flue Connection is Convertible (Rear/Top).
• Makes this boiler much easier to adapt to an existing chimney.
• Steam trim is shipped loose allowing the installer optional locations for the condensate return piping, pressure relief valve and boiler drain.
• 10 Year Non-prorated Limited Warranty (Residential)
  ,
  
  
  
  

  Crown Boiler KSB200ZOTP1SSU0

Anderson Fittings 5818x8 Oil Tank Valve, 3/8 x 1/2", Flare x MPT

Sid Harvey Item #:495-1: Replaces Part #:'s : 2K001,
,

Utica Boiler Parts 5611508

ECR International EWC410031240103 Oil Fired Cast Iron Water Boiler 140K BTU 86%
,
,

Dunkirk EWC410031240103

Dunkirk ExB407530240203 3-Pass Oil Fired Cast Iron Boiler Water Package Boiler 10K5 BTU 87% AFUE Beckett Burner/ECM Taco

• Boiler Control Module: Hydrolevel Fuel Smart HydroStat Control - combination Low Water Cut Off with boiler temperature reset and circulator control.
• User Display Interface: Digital display with easy to set dial-type limit settings.
• Heat Exchanger: High efficiency, cast iron, 3-pass design with reversible swing door and target wall.
• Efficiency baffles/liner by model.
• Combustion: Oil burner with protective cover, Flexible oil line.
• Electrical: Wiring harness with Molex connectors.
• Burner electrical disconnect.
• Other: Temperature/pressure guage, 3/4 ASME relief valve, drain valve.
• Textured painted steel jacket.,
  ,
  
  
  
  

  Dunkirk EXB407530240303

The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with base fluids that are specifically formulated to deliver optimum performance with minimal additive levels.

• Fully formulated polyol ester lubricant
• OEM approved, including Copeland approved RL32-3MAF
• Compatible with mineral oils, alkylbenzenes and PAG's

Sid Harvey Item #:4314-66: Replaces Part #:'s : 37118,
,

Nu-Calgon 4314-46