Bell & Gossett B138-LF F3 Brass Dual Unit Valve 1/2" NPT 30 PSI Relief x 12 PSI Reducing

Bell & Gossett B138-LF

Amtrol Parts B135-41 Diaphragm Type Expansion Tank 4.4 Gallon 1/2" MPT 30 Lbs

• Accepts expanded water as system temperature rises to reduce pressure build-up
• Helps reduce energy consumption and reduces system wear
• Suitable in propylene glycol applications with mixtures up to 50%
• Heavy-duty butyl/EPDM diaphragm
• Steel system connection
• Projection welded air valve
• Made in USA,
  
  ,
  

  Amtrol Parts B135-41

Amtrol Parts Amtrol Parts B135-40 Diaphragm Type Expansion Tank 2 Gallon 1/2" MPT 15 Lbs

• Accepts expanded water as system temperature rises to reduce pressure build-up
• Helps reduce energy consumption and reduces system wear
• Suitable in propylene glycol applications with mixtures up to 50%
• Heavy-duty butyl/EPDM diaphragm
• Steel system connection
• Projection welded air valve
• 1 Gallon maximum acceptance volume
• Made in USA
• 13" H x 8" Diameter

Sid Harvey Item #:B135-40: Replaces Part #:'s : 3207,

,

Amtrol Parts B135-40

Watts Regulators series 1450F dual controls regulator and relief Valve are for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, an attached iron body, diaphragm relief valve, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Series 1450F has high capacity performance and simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems.

• Combination fill valve and safety pressure relief valve
• Tight seating check valve
• Purge lever for manual purging
• High capacity
• Stainless steel strainer to protect the valve disc from fouling
• 15 psi set and 30 psi relief valve setting

Sid Harvey Item #:B144-1: Replaces Part #:'s : 2K402,
,

Watts Water B144-1

Dual Float and Switch Assembly 15 psi

• 1-piece unit that facilitates installation and ensures the most up-to-date construction
• Complete float and dual switch assembly

Sid Harvey Item #:B121-1: Replaces Part #:'s : 2K416,
,

Watts Water B121-1

Watts Regulators series 1450F dual controls regulator and relief Valve are for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, an attached iron body, diaphragm relief valve, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Series 1450F has high capacity performance and simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems.

• Combination fill valve and safety pressure relief valve
• Tight seating check valve
• Purge lever for manual purging
• High capacity
• Stainless steel strainer to protect the valve disc from fouling
• 100 psi working , 15 psi set and 30 psi relief valve setting

Sid Harvey Item #:B144-2: Replaces Part #:'s : R54-740,
,

Watts Water B144-2

Mcdonnell & Miller 47-2 Mechanical Water Feeder, 3/4" NPT Threaded, 120/240 VAC

• Continuous maintenance of minimum safe water level, independent of electrical service
• Proportional feed action
• Quick hook-up fittings provided
• Quick change replaceable cartridge valve and strainer
• Model 47 can be field upgraded with a No #2 switch to add low water cut-off function

Sid Harvey Item #:B110-1: Replaces Part #:'s : 13591,

McDonnell & Miller B110-1

Watts Regulator series 374A boiler pressure relief valves are used in hot water boiler applications to protect against excessive pressure on all types of hot water heating boiler equipment. It consists of an iron body construction with forged bronze inlet connections, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 374A resists corrosive water conditions, sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control.

Watts Water B145-9

Watts Regulators series 740 boiler pressure relief valves are used in hot water space heating boiler applications to protect against excessive pressure on all types of hot water space heating boiler equipment. It consists of a iron body construction with expanded outlet drain connections for hot water space heating boilers, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 740 offers large discharge capacity, resists corrosive water conditions, resists sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control.

• Iron body with expanded outlets for hot water space heating boilers
• Seat located above drain, water can't be trapped and sediment can't foul seat
• Non-mechanical seat-to-disc alignment will not stick or freeze
• Water seal of high temperature resisting material isolates spring working parts from water during relief

Sid Harvey Item #:B145-5: Replaces Part #:'s : 35699,

,

Watts Water B145-5

Watts Regulators series 740 boiler pressure relief valves are used in hot water space heating boiler applications to protect against excessive pressure on all types of hot water space heating boiler equipment. It consists of a iron body construction with expanded outlet drain connections for hot water space heating boilers, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 740 offers large discharge capacity, resists corrosive water conditions, resists sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control.

• Iron body with expanded outlets for hot water space heating boilers
• Seat located above drain, water can't be trapped and sediment can't foul seat
• Non-mechanical seat-to-disc alignment will not stick or freeze
• Each hot water space heating boiler shall be equipped with a pressure relief valve set to relieve below the maximum boiler working pressure
• Water seal of high temperature resisting material isolates spring working parts from water during relief

Sid Harvey Item #:B145-6: Replaces Part #:'s : 24603,
,

Watts Water B145-6

Mcdonnell & Miller 310447 Blow-Down Ball Valve, 3/4", NPT

• Full ported ball action valve
• PTFE seats provide bind free, leak tight ball movement
• Easy open handle keeps hands away from hot water and steam
• Gasket and mounting screws included
• For hot water and steam boilers

Sid Harvey Item #:B122-2: Replaces Part #:'s : 13552,
,

McDonnell & Miller B122-2

Taco air scoop's special design and internal baffles of Taco air scoops slow water velocity to separate the air from solution. Thanks to this design, Taco air scoops efficiently remove air to provide noiseless, air-free hydronic heating, cooling or combination systems. They also provide an economic way to integrate air elimination by the connection of either a plain steel or diaphragm expansion tank.

• 1-piece cast iron construction
• Never requires any servicing
• Engineered baffle separates air from water
• Each air scoop has a vent connection on top for the installation of a 1/8" Taco 400-3 or 416-1 Hy-Vent and 1/2" bottom tapping for a diaphragm expansion tank
• The 1-1/2 - 4" air scoops also have an additional top tapping for the connection of a plain steel expansion tank
• Water or water/glycol media

,
,

Taco B153-14