Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FAS180HAAA2AUA

FEATURES:
Smart Diagnostics

Self configuring (ease of installation)

Easier troubleshooting, providing faster service and repair

Energy Tracking capability with the Ion Wall Control. (Energy Tracking has the ability to monitor and estimate the energy consumption of your Ion system.)

Compatibility with wall control depends on software version. Check the installation instructions for minimum requirements. Environmentally Responsible Refrigerant
Technology

R-410A refrigerant chlorine-free, non-ozone depleting

Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant. Bi-flow hard-shutoff with mechanical fittings

International Comfort Products FCMB4B48L0CA

FEATURES:
Smart Diagnostics

Self configuring (ease of installation)

Easier troubleshooting, providing faster service and repair

Energy Tracking capability with the Ion Wall Control. (Energy Tracking has the ability to monitor and estimate the energy consumption of your Ion system.)

Compatibility with wall control depends on software version. Check the installation instructions for minimum requirements. Environmentally Responsible Refrigerant
Technology

R-410A refrigerant chlorine-free, non-ozone depleting

Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant. Bi-flow hard-shutoff with mechanical fittings

International Comfort Products FCMB4B60L0DA

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FAX091H2AA0AUA

FEATURES:
Smart Diagnostics

Self configuring (ease of installation)

Easier troubleshooting, providing faster service and repair

Energy Tracking capability with the Ion Wall Control. (Energy Tracking has the ability to monitor and estimate the energy consumption of your Ion system.)

Compatibility with wall control depends on software version. Check the installation instructions for minimum requirements. Environmentally Responsible Refrigerant
Technology

R-410A refrigerant chlorine-free, non-ozone depleting

Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant. Bi-flow hard-shutoff with mechanical fittings

International Comfort Products FCMA5B60L0DA

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FAX091L2AA0AUA

Fujitsu FH4821TPSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

• 48K BTU 4 Ton
• 115/1 VAC
• 21" Wide
• PSC Motor
• Multi-Position,
  ,
  
  
  
  

  Fujitsu FH4221TPSJSN