Air Handler 2.5 Ton 1-Stage PSC Motor Front Return R410A 24" W x 36" H x 21" L

Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Front or Bottom Return with Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Rugged Steel Cabinet Construction: Designed for added strength and versatility

Most Compact Unit Design Available: All standard air handler models are only 36" [915mm] in height

Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect

Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193

Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation if excess refrigerant is detected

FHFSPS3024SJZTNAN00

Item#:

FHFSPS3024SJZTNAN00

Manufacturer Item:

FHFSPS3024SJZTNAN00

Manufacturer:

FUJITSU

FHFSPS3024SJZTNAN00_Spec

Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Rugged Steel Cabinet Construction: Designed for added strength and versatility

Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height

Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation if excess refrigerant is detected

FHFSTT2421SJZTNAB10

Item#:

FHFSTT2421SJZTNAB10

Manufacturer Item:

FHFSTT2421SJZTNAB10

Manufacturer:

FUJITSU

FHFSTT2421SJZTNAB10_Spec

Air Handler 3 Ton 2-Stage Constant Torque R410A 21" W x 50-1/2" x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper Stub braze connections

Air handlers are 230/1 Volts

FUJITSU FHSMTT3621SAZTNAN00

Item#:

FHSMTT3621SAZTNAN00

Manufacturer Item:

FHSMTT3621SAZTNAN00

Manufacturer:

FUJITSU

FHSMTT3621SAZTNAN00_Spec

Air Handler 3 Ton Multi-Position Constant Torque TXV 208/230 17-1/2" W x 42-1/2" H x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper Stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHRNTT3617SJZTNA

Item#:

FHRNTT3617SJZTNA

Manufacturer Item:

FHRNTT3617SJZTNA

Manufacturer:

FUJITSU

FHRNTT3617SJZTNA_Spec

Air Handler Commercial Heat Pump 10 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

Multiposition design for horizontal or vertical installation without modification

Two sloped condensate pans on each unit for horizontal or vertical applications

Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality

High-static design meets a wide range of applications than competitive package air handler lines

Economizer accessory provides ventilations air and free cooling

Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers

Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes

Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes

High efficiency copper tube / aluminum coils

Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element

Easy maintenance removal of single panel allows access to virtually all components

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available

24volt terminal block for control wiring connection.

Hot water coil, steam coil, and electric heat accessories are available.

FHX120H2AA0AUA

Item#:

FHX120H2AA0AUA

Manufacturer Item:

FHX120H2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHX120H2AA0AUA_Spec

Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Rugged Steel Cabinet Construction: Designed for added strength and versatility

Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height

Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation if excess refrigerant is detected

FHFSTT2421SJZTNAB05

Item#:

FHFSTT2421SJZTNAB05

Manufacturer Item:

FHFSTT2421SJZTNAB05

Manufacturer:

FUJITSU

FHFSTT2421SJZTNAB05_Spec

Air Handler 3 Ton Multi Position 120/1 PSC Motor

Front or Bottom Return with aluminum tube and fin coil

Flow Check Piston for cooling or heat pump operation

Wall-hanging brackets

Built in Filter Rack

AHRI Certified

UL Certified

Molex Plug Connections for field installed heater kits

Dual Voltage Direct Drive Blower with multi-speed motor

Thermoplastic Drain Pan with bottom primary and secondary connections

Optional Decorative Grill for front return applications

Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

FUJITSU FHRNTT3617SAZTNA

Item#:

FHRNTT3617SAZTNA

Manufacturer Item:

FHRNTT3617SAZTNA

Manufacturer:

FUJITSU

FHRNTT3617SAZTNA_Spec

Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Rugged Steel Cabinet Construction: Designed for added strength and versatility

Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height

Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation if excess refrigerant is detected

FHFSTT2421SJZTNAB08

Item#:

FHFSTT2421SJZTNAB08

Manufacturer Item:

FHFSTT2421SJZTNAB08

Manufacturer:

FUJITSU

FHFSTT2421SJZTNAB08_Spec

Air Handler Commercial Heat Pump 6 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L