|◀ 4933 - 4944 of 6095 ▶|
View:
  • Features Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application.
  • Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

    York JME16C2SN1

  • Item#:
    JME18D2SN1
    Manufacturer Item:
    JME18D2SN1
    Manufacturer:
    JC RESIDENTIAL AND LIGHT COMME
    ICM Controls ICM275C Adjustable Fan Blower Control Board, 18 - 30 VAC
    • Heavy-duty heat relay
    • Integral short cycle protection
    • Micro-processor based fan blower control
    • Purges ducts of residual air
    Sid Harvey Item #:ICM275C: Replaces Part #:'s : CES0110019,
    ,



    ICM Controls ICM272C

    Item#:
    ICM275C
    Manufacturer Item:
    ICM275C
    Manufacturer:
    ICM INTERNATIONAL
  • Features Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application.
  • Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

    York JME12C2SN1

  • Item#:
    JME16C2SN1
    Manufacturer Item:
    JME16C2SN1
    Manufacturer:
    JC RESIDENTIAL AND LIGHT COMME
    ICM Controls ICM277 Control Board, 18 - 30 VAC , 20 amp Normally Open/10 amp Normally Closed
    • Micro-processor-based fan blower
    • Direct replacement for Goodman 800442010359/B1370735S/PCBFM131S
    ,
    ,



    icm controls icm277c

    Item#:
    ICM277C
    Manufacturer Item:
    ICM277
    Manufacturer:
    ICM INTERNATIONAL
    ICM Controls ICM289 Furnace Control Board, 98 - 132 VAC at 60 Hz Line
    • Low cost form, fit and functional replacement board for Lennox BCC1, BCC2 and BCC3 circuit boards
    • Controls inducer fan motor, blower fan and monitors limit switches
    • Micro-processor based design
    • Functions with all 24 VAC thermostats
    Sid Harvey Item #:ICM289: Replaces Part #:'s : BBC1 | BBC2 | BBC3,
    ,



    ICM Controls ICM288

    Item#:
    ICM289
    Manufacturer Item:
    ICM289
    Manufacturer:
    ICM INTERNATIONAL
    ICM Controls ICM288 Furnace Control Board, 98 - 132 VAC at 60 Hz, 7-1/2Sid Harvey Item #:ICM288: Replaces Part #:'s : 62-24084-82 | 62-2408482 | 622408482,
    ,



    ICM Controls ICM286

    Item#:
    ICM288
    Manufacturer Item:
    62-24084-82
    Manufacturer:
    ICM INTERNATIONAL
    ICM Controls ICM286 Furnace Control Board Replacement for Goodman PCBBF112(S), B1809926(S), 0130F00005(S),
    ,



    ICM Controls ICM282B

    Item#:
    ICM286
    Manufacturer Item:
    ICM286
    Manufacturer:
    ICM INTERNATIONAL
    ICM Controls ICM283 Hot Surface Universal Gas Ignition Control Module for Gas-Fired Furnaces, Boilers and Other Heating Applications, 120 and 24 VAC
    • Low cost, direct replacement ignition control
    • Single/dual rod sensing capabilities
    • Switch selectable lockout times, ignition trials
    • Works with both Natural and LP gas systems
    • Diagnostic LED to aid in troubleshooting
    Sid Harvey Item #:ICM283: Replaces Part #:'s : H5780,
    ,



    icm controls icm283

    Item#:
    ICM283
    Manufacturer Item:
    ICM283
    Manufacturer:
    ICM INTERNATIONAL
    ICM Controls ICM282 Furnace Control Board, 98 - 132 VAC
    Sid Harvey Item #:ICM282: Replaces Part #:'s : HK42FZ011,
    ,

    icm controls icm282

    Item#:
    ICM282
    Manufacturer Item:
    ICM282A
    Manufacturer:
    ICM INTERNATIONAL
    ICM Controls ICM280 Fan Control Board,
    ,



    ICM Controls ICM275C

    Item#:
    ICM280
    Manufacturer Item:
    ICM280
    Manufacturer:
    ICM INTERNATIONAL
    Features
  • Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation
  • Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application
  • Designed for easy installation and service
  • A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion. A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

    York JHE36C5CD2SS1

  • Item#:
    JHE48D5CG2SS1
    Manufacturer Item:
    JHE48D5CG2SS1
    Manufacturer:
    JC RESIDENTIAL AND LIGHT COMME
    |◀ 4933 - 4944 of 6095 ▶|
    View: