S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Root-Lowell Manufacturing F1-37B Brass Cone Nozzle Cap NOZZLE,CONE CAP,BRASS,
,
,
Root-Lowell Manufacturing F1-37B
Item#:
F1-37B
Manufacturer Item:
950-476
Manufacturer:
ROOT-LOWELL MANUFACTURING CO
Root-Lowell Manufacturing F1-37D Brass Extension
Root-Lowell Manufacturing F1-37D
Item#:
F1-37D
Manufacturer Item:
850-032
Manufacturer:
ROOT-LOWELL MANUFACTURING CO
White Rodgers Cooling Controls F50N02-820 Trane Furnace Board
White Rodgers F50N02-820
Item#:
F50N02-820
Manufacturer Item:
F50N02-820
Manufacturer:
WHITE-RODGERS DIV OF COPELAND
K.O. Dirt Blaster is a high pressure cleaner and degreaser for small condenser coils found in restaurant and food service refrigeration, air conditioning, electrical and mechanical equipment. K.O. Dirt Blaster strips off dirt and cooking grease without a water rinse. It contains a quick drying safety solvent and has a pleasant citrus scent. Its high dielectric strength and non-flammable formula is great for most coil cleaning applications.
RectorSeal F51-18
Taco is a hydro air fan control is an interface between the thermostat and air handler. It also has an isolated end switch to start the boiler and/or pump. When the thermostat calls for heat, the fan control energizes the end switch relay and allows the fan to operate at low speed when the water is above the optional aquastat setting. When the thermostat calls for cooling, the fan control energizes the condenser and operates on high speed.
,
- External indicator lights
- Works with 1 or 2-speed air handlers
- 100% factory tested
- Automatic multi-speed switching
- Snap-in PC board
- Prevents false calls for fan operation
- Simplified wiring
- Universal thermostat compatibility
- Contractor friendly PC board layout
- Increased operating efficiency
- Extended 3 years warranty
- Built-in time delays
- Separate contacts for pump and boiler
- Pump exercise timer
- Additional aquastat connection for freeze protection
,
Taco HAFC-201
Honeywell S87D1004 Direct Spark Ignition Control Module, 24 VAC, 60 Hz, 1-15/16" L x 4-1/16" W x 5-1/4" H
,
- Control ignition sequence and gas control operation
- Generate high voltage potential for main burner ignition
- Lockout after one trial for ignition if main burner fails to ignite
- Reset from thermostat after lockout
- Use modules with any combination gas control designed for direct spark applications and rated 2 amp or less
,
Honeywell G565-36
Item#:
G565-36
Manufacturer Item:
S87D1004
Manufacturer:
HONEYWELL
ICM Controls ICM2805A Furnace Control Board, 120 - 240 VAC at 60 Hz, 4-1/2" L x 6" W x 1-1/2" H
,
- Controls gas valve, inducer draft motor, circulating blower and hot surface igniter
- Microprocessor based precision
- Monitors timing, trial for ignition, flame sensing, lockout, plus pressure, rollout and limit switches
- Twinning compatible with another ICM2805A furnace control
- Diagnostic LEDs to aid in testing/troubleshooting
,
ICM Controls ICM2805
Item#:
ICM2805
Manufacturer Item:
ICM2805
Manufacturer:
ICM INTERNATIONAL
Features
Next generation high-efficiency blower
Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
Two-stage operation
Provides flexibility in application with single and two-stage outdoor equipment.
Next generation insulation and gasket design
Reduces thermal transmission paths and reduces sweating.
Nine speed standard ECM blower motor
Provides increased system compatibility.
Electric heat kit 8HK field-installed series available for easy installation and service application
Designed for easy installation and service
A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight
applications. Front facing components, slide out blower, laser cut knock outs and integrated duct
flanges shorten install time.
Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard
193.
Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.
A2L refrigerant ready
An R-454B refrigerant detection system (RDS) is factory installed.
York JHE60D5CJ2SS1
Item#:
JHE60D5CJ2SS1
Manufacturer Item:
JHE60D5CJ2SS1
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM
York JME12C2SN1
Item#:
JME12C2SN1
Manufacturer Item:
JME12C2SN1
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM
Features
Next generation high-efficiency blower
Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
Two-stage operation
Provides flexibility in application with single and two-stage outdoor equipment.
Next generation insulation and gasket design
Reduces thermal transmission paths and reduces sweating.
Nine speed standard ECM blower motor
Provides increased system compatibility.
Electric heat kit 8HK field-installed series available for easy installation and service application
Designed for easy installation and service
A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight
applications. Front facing components, slide out blower, laser cut knock outs and integrated duct
flanges shorten install time.
Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard
193.
Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.
A2L refrigerant ready
An R-454B refrigerant detection system (RDS) is factory installed.
York JHE36C5CD2SS1
Item#:
JHE36C5CD2SS1
Manufacturer Item:
JHE36C5CD2SS1
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM
Features
MaxAlloy coil
Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability
Next generation even-flow distributor
Designed for balanced refrigerant flow and even coil circuit performance
Next generation high-efficiency blower
Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor
Variable speed operation
Provides flexibility in application as well as upgraded system efficiency
Next generation insulation and gasket design
Reduces thermal transmission paths and reduces sweating
Electric heat kit
8HK field-installed series available for easy installation and service application
Two-stage operation
Provides flexibility in application with single-stage and two-stage outdoor equipme
Item#:
JHC24B5AC2SS1
Manufacturer Item:
JHC24B5AC2SS1
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM
Features
Next generation high-efficiency blower
Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
Two-stage operation
Provides flexibility in application with single and two-stage outdoor equipment.
Next generation insulation and gasket design
Reduces thermal transmission paths and reduces sweating.
Nine speed standard ECM blower motor
Provides increased system compatibility.
Electric heat kit 8HK field-installed series available for easy installation and service application
Designed for easy installation and service
A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight
applications. Front facing components, slide out blower, laser cut knock outs and integrated duct
flanges shorten install time.
Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard
193.
Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.
A2L refrigerant ready
An R-454B refrigerant detection system (RDS) is factory installed.
York JHE60C5CH2SS1
Item#:
JHE60C5CH2SS1
Manufacturer Item:
JHE60C5CH2SS1
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM