Boston Valve USAD0509201 Forged Brass 2-Piece Full Port Drainable Ball Valve, 1/2", Solder

• A stop and waste design
• Zinc plated steel nut and lock washer, brass gland nut, drain cap and end cap
  Boston Valve Metal Products, LTD. was established in the summer of 1998 by it's three founding partners who combined, have over fifty years of experience in the manufacturing and sale of plumbing and related products. BMP currently occupies approximately 16,000 square feet office, manufacturing and warehouse space in a modern industrial park located in northeast Rhode Island, in the rural town of Smithfield. This ideal location, within minutes of three major highways, allows for shipment of product to your door in a most timely fashion. BMP's goal is to ship all orders within 24 to 48 hours of receiving them, so that our customers are able to minimize inventory requirements with the confidence that products are only a truck ride away.,
  ,
  

  Boston Valve USADO509201

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.Southwark 10051030 Oval Snaplock Pipe 5" x 100" Gallonvanized 30 Gauge

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.Southwark 10051030 Oval Snaplock Pipe 5" x 100" Gallonvanized 30 Gauge

Southwark 547

Southwark 547

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.Southwark 10051030 Oval Snaplock Pipe 5" x 100" Gallonvanized 30 Gauge

Southwark 548

Southwark 548

Thermo Products Parts 817100 Baffle

Thermo Products Heating Parts 817100

Carlisle AFG-1402 Mastic Duct Tape Foil Foil-Grip 1402 is a pressure sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for subgrade application on PVC coated duct and is ideal for replacement applications.

Carlisle AFG-1402

Therma Flow Parts PLATE-&-GASKET-V7 Plate & Gasket V7 Boiler

Therma Flow Parts PLATE-&-GASKET-V7

Parker SPORT-11-11 Evaporator Pressure Regulating Valve W/Electric Shut Off 1-3/8" OD

SPORT-11-11

Parker commercial pressure regulator (S)PORT/(S)PORTII valves are designed with stainless steel bonnet bolts, adjusting stems, and pisTon and plug assemblies. The result is a regulator designed to withstand the rigorous application environment a low side regulator must endure. Models are available in combinations of connection sizes, port sizes and features as designated by the model code. Unlike some competitive models of low side regulators that utilize high pressure discharge gas as a pilot source, they are piloted with upstream pressure. This eliminates the requirement for hot gas headers, isolation devices, piping, and the labor associated with the installation of other valves. Flare connections from high pressure pilot lines are also eliminated, minimizing sources for prospective leaks. The valves are an integrated assembly of (4) modules: 1) a body, which contains no moving parts, 2) a capacity cartridge, which contains both pisTon and modulating plug, and defines the port size and onto which the pilot solenoids providing the"S" (shut-off) or"B" (bypass) features are added as required, 4) the bonnet, containing the range spring and adjustment screw, which is set for the value of pressure which the valve is to maintain. The unique modular design allows the regulator to be soldered into the line without disassembly, yet provides full access for disassembly, cleaning and servicing from the top only. Interchangeable capacity cartridges facilitate flow revisions should an undersized or oversized condition be encountered, while pilot adapters can be changed out to add features or even change functions.

• Retrofitting for additional evaporator capacity is simple and requires no pipe line revisions
• The pisTon and plug assembly can handle reduced flow conditions and controlling down to about 15% of the valve's maximum capacity
• 7/8" OD
• Designed entirely with corrosion resistant materials
• New cooler running coil and open frame coil housing
• New dual VAC age 208/240/60 Hz coil
• Conveniently located access fitting
• Pilot operated for close control at desired set-point
• Excellent regulation at light loads
• Interchangeable capacity cartridges
• Low pressure drop
• Few moving parts
• Long-life stainless steel diaphragms (no bellows to fail)
• Pilot electric shut-off
• All service from the top
• Sweat-in-place without disassembly

,
,

Parker SPORT-07-07

Heatcraft Parts 23308101 Coil Face Heater Clip 1/2" OD

23308101

Berry Global 367-17-2 Nashua Foil Mastic Butyl Rubber Sealant Tape 2" x 100' (Silver)

Berry Global 367-17-2

Berry Global 367-17-3 Nashua Foil Mastic Butyl Rubber Sealant Tape 3" x 100' (Silver)

Berry Global 367-17-3