|◀ ◀ 3685 - 3696 of 6090 ▶ ▶|
View:

Evaporator Coi Cased Multi-Positional Cased 3-1/2" Ton W/Power-V Technology 21" R454B

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM5X32M17A

    • Item#:
    EVM5X42M21A
    Manufacturer Item:
    EVM5X42M21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM5X_SPEC

    Evaporator Coi Cased Multi-Positional Cased 3 Ton W/Power-V Technology 17-1/2" R454B

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM5X32M17A

    • Item#:
    EVM5X36M17A
    Manufacturer Item:
    EVM5X36M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Evaporator Coi Cased Multi-Positional Cased 2.5 Ton W/Power-V Technology 17-1/2" R454B

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM5X31M17A

    • Item#:
    EVM5X32M17A
    Manufacturer Item:
    EVM5X32M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM5X_SPEC

    Temperature Sensor R2107

    Bosch Heating Parts 7747007982 Temperature Sensor R2107,

    bosch heating parts 7747007982

    Item#:
    7747007982
    Manufacturer Item:
    7747007982
    Manufacturer:
    BOSCH THERMOTECHNOLOGY CORP

    Oiler Gun W/Hose For 418 & 402 Oiler

    Ridge 72327 Oiler Gun W/Hose For 418 & 402 Oiler

    72327

    Item#:
    72327
    Manufacturer Item:
    72327
    Manufacturer:
    RIDGID TOOL COMPANY
     
    72327_Broc

    Header 2-Zone 1" x 3/4"

  • Eastern Foundry and Fittings Inc. founded in 1995, specializes in the manufacture and distribution of low lead and lead free forged brass full port ball valves, quarter turn brass mini ball valves, brass PEX ball valves, cast brass drains, F1960 and F1807 brass and F1807 polyphenylsulfone pex fittings, and caters exclusively to private brand OEM's, to retail /wholesale distributors serving the residential, commercial, institutional, industrial plumbing and HVAC market segments.
  • All products are fully certified and carry all the relevant NSF, CSA, UL, FM and UPC approvals. Certification services are provided exclusively through NSF, CSA, UL and FM directly. Products meet all regional and national North American code requirements.
  • Over the 20 plus years the company has been in business the company has forged many long-term relationships with many very well-known private brand and distribution partners and has earned a solid reputation for consistently producing high quality and competitively priced products. And for it's ability to manufacture custom made products and bring innovative new solution based valve products to market.
  • The company maintains an ISO 9001:2000 certified manufacturing facility in Ningbo, China and currently has two distribution hubs to service the requirements of the North American market. The company employs over 200 people worldwide.
  • Manufacturing follows a stringent quality control program and performs rigorous testing throughout the manufacturing process, ensuring that all of our products are within specification offering trouble free service for the life of the product.

    Commercial Industrial Supply F01150S

    • Item#:
    EFFBHM-5-2-44
    Manufacturer Item:
    EFFBHM-5-2-44
    Manufacturer:
    EASTERN FOUNDRY & FITTING LLC.

    Titan Max 3 & 4 Pole Aux Switch 1 Normally Open-1 Normally Closed

    Features
  • Meets The ARI 780/790 Standard
  • Accepts Auxiliary Switch
  • Universal metal mounting plate allows for complete ease of replacement
  • Long electrical life; tested to 250,000 cycles
  • Reliable mechanical life; tested to 1,000,000 cycles
  • EE magnet assembly assures optimal performance without sacrificing power consumption
  • Superior copper coil
  • Performance unaffected by mounting position
  • Flexible termination options suitable for various applications
  • Dust-free internal constructions

    Packard P9S

    • Item#:
    TMX1NC/1NO
    Manufacturer Item:
    TMX1NC-1NO
    Manufacturer:
    PACKARD INC
     
    TMX1NC1NO_Broc

    PEX Tube with Oxygen Barrier 5-Layer 1/2" X 300' Coil

    Roth 2352159000 Polyethylene 5-Layer PEX Tube with Oxygen Barrier
    • 1/2" x 300' Coil,
      ,



      Roth 2342224037

    Item#:
    2352159000
    Manufacturer Item:
    2352159000
    Manufacturer:
    PEX TUBE AND FITTINGS
     
    Roth-Plumbing-Catalog_Broc

    Condensate Neutralizer Kit (Tank Style)

    Jjm Boiler Works NBT-23 Blue Polypropylene Tank Condensate Neutralizer Tank, 3/4" PVC Socket/Barb, 0 - 2.4 gph


    JJM Boiler Works JM-2R

    Item#:
    NBT-23
    Manufacturer Item:
    NBT-23
    Manufacturer:
    JJM BOILER WORKS, INC
     
    NBT-23_Broc
    NBT-23_Misc

    Condensate Pump Neutralizer Combo Kit

    JJM Boiler Works NBT-24-P Condensate Pump Neutralizer Combo Kit



    JJM Boiler Works NBT-23

    Item#:
    NBT-24-P
    Manufacturer Item:
    NBT24-P
    Manufacturer:
    JJM BOILER WORKS, INC
     
    NBT-24-P_Broc

    Ignition Module

    Crown Boiler Parts 3505065 Ignition Module
      ,
      ,



      Crown Boiler Parts 3504080

    Item#:
    3505065
    Manufacturer Item:
    350-5065
    Manufacturer:
    CROWN BOILER COMPANY

    TWZ-100 Aquastat

    Crown Boiler Parts 3503025 TWZ-100 Aquastat
      ,
      ,



      Crown Boiler Parts 350076

    Item#:
    3503025
    Manufacturer Item:
    3503025
    Manufacturer:
    CROWN BOILER COMPANY
    |◀ ◀ 3685 - 3696 of 6090 ▶ ▶|
    View: