S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
A non-acid, alkaline-based product for cleaning and brightening air cooled condensers. It is formulated with the best available foaming detergents and chelants to quickly penetrate and dissolve greasy dirt and grime and foam it right out of the coil. The safer alternative to acids.Sid Harvey Item #:4291-08: Replaces Part #:'s : 4770,
Nu-Calgon 4291-08
Therma-Flow Parts 55-5 Tankless Hot Water Coil Thermo-Dynamics Boilers,
Therma-Flow 55-5
Item#:
55-5
Manufacturer Item:
55-5
Manufacturer:
THERMA-FLOW, INC.
Diversified Heat Transfer GOS-5 Residential Tankless Coil for Weil-McLain,
Diversified Heat Transfer 65-S-5
Item#:
65-S-5
Manufacturer Item:
GOS-5
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
8-Way is a complete boiler water treatment (nonchromate, biodegradable) for both steam and hot water systems - Removes sludge, Removes rust scale, Inhibits boiler corrosion, Inhibits steam line corrosion, Prevents oxygen pitting, Inhibits lime scale, Prevents surging and foaming and Controls pH with a color indicator. Does not contain petroleum distillates. Will not damage seals and gaskets.
,
- Non-chromate, biodegradable
- Contains no petroleum distillates
- Color coded cure
,
RectorSeal 68712
Flow Rate
Atomizing nozzles are available in a wide range of flow rates, all
but eliminating the need for specially calibrated nozzles. Between
1.00 GPH and 2.00 GPH, for example, seven different flow rates
are available. Generally, with hot water and warm air heat, the
smallest firing rate that will adequately heat the house on the
coldest day is the proper size to use and the most economical.
Short on-cycles result in low efficiency. Another guideline is to
select the flow rate that provides a reasonable stack temperature
regardless of the connected load. (According to the New England
Fuel Institute, aim for a stack temperature of 400°F or lower on
matched packaged units or 500°F or lower on conversion burners.)
If the boiler or furnace is undersized for the load, it may be
necessary to fire for the load and ignore the efficiency
Spray Angle
Spray angles are available from 30° through 90° in most nozzle
sizes to meet the requirements of a wide variety of burner air
patterns and combustion chambers.
Usually it is desirable to fit the spray angle to the air pattern of the
burner. In todays flame retention burner, it is possible to fire more
than one spray angle with good results. Generally, round or square
combustion chambers should be fired with 70° to 90° nozzles.
Long, narrow chambers usually require 30° to 60° spray angles.
Burner Air Patterns
Burner air patterns are much like nozzle spray patterns in that
they fall into the same general classifications, either hollow or
solid. As you would expect, a burner with a hollow air pattern
generally requires a hollow cone fuel nozzle. A burner with a solid
air pattern will give highest efficiency with a solid cone nozzle,
but the flame will probably be longer.
Spray Angle
Protek Valve 135 psi (5 Pack) 60101-001
Item#:
60101-001
Manufacturer Item:
60101-001
Manufacturer:
DELAVAN SPRAY TECH
Replacement Parts Below:
527-0116-00 Spacer Mounting Assembly
529-0060-24 Molded Power Cable Plug
918-0041-00 Crankcase Heater 240V 40W Wrap Around
918-0041-01 Crankcase Heater 120V 40W Wrap Around
985-0199-00 THERMISTOR KIT 1/2" TUBE DIA FOR EXT DISCHARGE
998-0034-02 SERV ADAPTOR KIT 7/8 STUB SWEAT TO ROTALOCK ADAPTER KIT SUCTION
998-0034-08 Adapter 1-1/4"-12 to 7/8" ID Rotalock to Sweat Adapter Kit Suction
998-0034-15 Service Adapter Kit 1/2" Stub Sweat to Rotalock Adapter Kit Discharge
998-0034-18 Adapter 1"-14 to 1/2" ID Rotalock to Sweat Adapter Kit Discharge
998-0061-19 DIGITAL SOLENOID KIT 24V SOLENOID VALVE AND 24V COIL ONLY
527-0116-00 Spacer Mounting Assembly
529-0060-24 Molded Power Cable Plug
918-0041-00 Crankcase Heater 240V 40W Wrap Around
918-0041-01 Crankcase Heater 120V 40W Wrap Around
985-0199-00 THERMISTOR KIT 1/2" TUBE DIA FOR EXT DISCHARGE
998-0034-02 SERV ADAPTOR KIT 7/8 STUB SWEAT TO ROTALOCK ADAPTER KIT SUCTION
998-0034-08 Adapter 1-1/4"-12 to 7/8" ID Rotalock to Sweat Adapter Kit Suction
998-0034-15 Service Adapter Kit 1/2" Stub Sweat to Rotalock Adapter Kit Discharge
998-0034-18 Adapter 1"-14 to 1/2" ID Rotalock to Sweat Adapter Kit Discharge
998-0061-19 DIGITAL SOLENOID KIT 24V SOLENOID VALVE AND 24V COIL ONLY
Copeland ZPD42K5E-TF5-830
Item#:
ZPD42K5E-TF5-830
Manufacturer Item:
ZPD42K5E-TF5-830
Manufacturer:
COPELAND LP
The Henry Liquid Eye Sight has a unique"see-thru" feature that is more readable than other sight glasses. The dot on the tube is magnified when the tube is full of refrigerant to give a quick, easy indication.
- Shock resistant glass
- Color bar designed for HFC refrigerants
- Made in USA
Henry Technologies SG1206
Item#:
SG1206
Manufacturer Item:
SG1206
Manufacturer:
HENRY TECHNOLOGIES, INC
Copeland 6DS3F11METSK899 Semi-Hermetic Discus Compressor 208/230/460/3 POE Oil
Copeland 6DS3F11METSK899
Item#:
6DS3F11METSK899
Manufacturer Item:
6DS3F11ME-TSK-899
Manufacturer:
COPELAND LP
Diversified Heat Transfer NCG-PR Neoprene Coil Gasket, 1/4 Inch Dia.
Diversified Heat Transfer NCG-PF
Item#:
NCG-PF
Manufacturer Item:
NCG-PR
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Gar-Ber FRI Oil Filter Gauge Diameter Bottom Mounting,
,
,
Gar-Ber FRI
Gar-Ber FRI
Item#:
FRI
Manufacturer Item:
FRI
Manufacturer:
GAR-BER FUEL FILTERS
Resideo L7224U1002 Electronic Aquastat Oil 120 VAC,
,
,
Resideo L7224U1002
Item#:
L7224U1002
Manufacturer Item:
L7224U1002
Manufacturer:
HONEYWELL
Sid Harvey P127-27 Large VAC Bolt for General Filters 2A-700A, Harvey 265,,
Sid Harvey P127-27
Item#:
P127-27
Manufacturer Item:
P127-27
Manufacturer:
MITCO MFG.
