|◀ ◀ 625 - 636 of 6095 ▶ ▶|
View:

Evaporator Coil Uncased Upflow/Downflow A-Coil 2 Ton R410A TXV Installed

  • 11/2 thru 5 Tons
  • Bolton R410A TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • 2piece delta plate for easier removal and cleaning
  • Cabinet widths match flush with ICP gas furnaces
  • Removable front access panel
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Nonsweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, prepainted steel cabinet
  • One or two UV light knockouts provided on cabinet (depending on size)
  • Aluminum main tubing and aluminum fins (copper stubs for field connection. EAM4X only
  • Two condensate drain connections (Additional two for horizontal installation)
  • Multiposition installation  upflow, downflow, or horizontal EAD4X and EAA4X only
  • Vertical installation  upflow or downflow

    International Comfort Products EAA4X24L14A

    • Item#:
    EAA4X24L17A
    Manufacturer Item:
    EAA4X24L17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EAA4X-ICP_Spec

    Evaporator Coil Cased Multi-Position A-Coil 5 Ton R410A TXV Installed

  • 11/2 thru 5 Tons
  • Bolton R410A TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water remova
    l
  • 2piece delta plate for easier removal and cleaning
  • Cabinet widths match flush with ICP gas furnaces
  • Removable front access panel
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Nonsweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, prepainted steel cabinet
  • One or two UV light knockouts provided on cabinet (depending on size)
  • Aluminum main tubing and aluminum fins (copper stubs for field connection.

    International Comfort Products EAM4X48L24

    • Item#:
    EAM4X60L24
    Manufacturer Item:
    EAM4X60L24A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EAM4X-ICP_Spec

    Evaporator Coil Cased Upflow/Counterflow W/Piston 2.5 Ton

  • Microban antimicrobial additive in the drain pan to resist mold and mildew growth.
  • One of the lowest water retention drain pans in the industry to minimize mold and mildew growth.
  • Interlocking door assemblies and snug line seal grommets to minimize air leakage
  • Foil-face insulation for easy cleaning
  • Tubing located at door split for easy coil service or cleaning
  • All drain pans are compatible with UV lights
  • All piston coils are compatible with R22 or R410a

    Armstrong Air Conditioning 1.911381

    • Item#:
    EC1P30BM-1
    Manufacturer Item:
    1.911287
    Manufacturer:
    ALLIED AIR ENTERPRISES
     
    Armstrong-Evaporators_Spec

    Evaporator Coil Uncased Upflow/Downflow A-Coil 2.5 Ton R410A TXV Installed

  • 11/2 thru 5 Tons
  • Bolton R410A TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • 2piece delta plate for easier removal and cleaning
  • Cabinet widths match flush with ICP gas furnaces
  • Removable front access panel
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Nonsweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, prepainted steel cabinet
  • One or two UV light knockouts provided on cabinet (depending on size)
  • Aluminum main tubing and aluminum fins (copper stubs for field connection. EAM4X only
  • Two condensate drain connections (Additional two for horizontal installation)
  • Multiposition installation  upflow, downflow, or horizontal EAD4X and EAA4X only
  • Vertical installation  upflow or downflow

    International Comfort Products EAA4X24L17A

    • Item#:
    EAA4X30L14A
    Manufacturer Item:
    EAA4X30L14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EAA4X-ICP_Spec

    Evaporator Coil Uncased Upflow/Downflow A-Coil 2 Ton

  • 11/2 thru 5 Tons
  • Bolton R410A TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • 2piece delta plate for easier removal and cleaning
  • Cabinet widths match flush with ICP gas furnaces
  • Removable front access panel
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Nonsweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, prepainted steel cabinet
  • One or two UV light knockouts provided on cabinet (depending on size)
  • Aluminum main tubing and aluminum fins (copper stubs for field connection. EAM4X only
  • Two condensate drain connections (Additional two for horizontal installation)
  • Multiposition installation  upflow, downflow, or horizontal EAD4X and EAA4X only
  • Vertical installation  upflow or downflow

    Fujitsu Unitary FCCN6024SZTA

    • Item#:
    EAA4X24L14A
    Manufacturer Item:
    EAA4X24L14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EAA4X-ICP_Spec

    Evaporator Coil Uncased Upflow/Downflow A-Coil 3 Ton 17" R454B

  • Uses R-454B refrigerant which our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-ozone depleting properties of our previous refrigerant.
  • Includes factory-installed refrigerant leak dissipation systems to meet new UL requirements and to show our commitment to safety.
  • Uncased A coil design for efficient heat transfer in a compact size
  • Corrosion-resistant all-aluminum coil
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacteria buildup
  • 10-year parts limited warranty
    • Item#:
    EAA5X36M17A
    Manufacturer Item:
    EAA5X36M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Evaporator Coil Cased 2 Ton W/Power-V Technology Multipoise

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVD5X60M24A

    • Item#:
    EVM4X24M17A
    Manufacturer Item:
    EVM4X24M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM4X

    Evaporator Coil Cased 2 Ton W/Power-V Technology Upflow/Downflow 14" R454B

  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.
  • All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
  • All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

    International Comfort Products EVD5X18M14A

    • Item#:
    EVD5X24M14A
    Manufacturer Item:
    EVD5X24M14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVD5X_SPEC

    Evaporator Coil Cased 2-1/2 Ton W/Power-V Technology Upflow/Downflow

  • Performance  Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • Thermostatic Expansion Valves (TXV)  All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • Durable Condensate Pan  The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort. Condensate Drain Pan Plugs  The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Refrigerant Connections  Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tubeonce the pipe swages are cut offto accommodate braze-less compression fittings.
  • Burst Pressure  Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling-only application.
  • UV Knockout  This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Serviceability  Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools

    International Comfort Products EVD4X30M14A

    • Item#:
    EVD4X30M14A
    Manufacturer Item:
    EVD4X30M14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ESD4X

    Evaporator Coil Cased Multi-Positional 2 Ton W/Power-V Technology 17-1/2" R454B

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM5X24M17A

    • Item#:
    EVM5X25M17A
    Manufacturer Item:
    EVM5X25M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM5X_SPEC

    Evaporator Coil Cased 3.5 Ton W/Power-V Technology Upflow/Downflow 17" R454B

  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.
  • All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
  • All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

    International Comfort Products EVD5X36M17A

    • Item#:
    EVD5X42M17A
    Manufacturer Item:
    EVD5X42M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVD5X_SPEC

    Evaporator Coil Cased Multi-Positional Cased 4 Ton W/Power-V Technology 21" R454B

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM5X43M21A

    • Item#:
    EVM5X48M21A
    Manufacturer Item:
    EVM5X48M21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM5X_SPEC
    |◀ ◀ 625 - 636 of 6095 ▶ ▶|
    View: