S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Weil-McLain CGA5PIDN-HALT Natural Gas Fired Cast Iron Water Boiler 140K BTU 84% AFUE High Altitude
Weil-Mclain CGA5PIDN-HALT
Item#:
CGA5PIDN-HALT
Manufacturer Item:
381-359-104
Manufacturer:
WEIL-MCLAIN
Diversitech PRO-YELLOW Coil Cleaner 1Gallon,
Diversitech PRO-YELLOW
Item#:
PRO-YELLOW
Manufacturer Item:
PRO-YELLOW
Manufacturer:
DIVERSITECH CORP.
Diversitech PRO-BLUE Concentrated FoamingCoil Cleaner, 1 Gallon, Blue, 1 Pro-Blue is a heavy foaming alkaline-based solution designed for condensers, microchannels and mini-splits that penetrates dirt and grease removing deposits resulting in clean and brightened coils. Pro-Blue is biodegradable, NSF approved and available in numerous packaging configurations.,
Diversitech PRO-BLUE
Item#:
PRO-BLUE
Manufacturer Item:
PRO-BLUE
Manufacturer:
DIVERSITECH CORP.
Diversitech Triple-D TRIPLE-D-AER Universal Coil Cleaner, 19 oz Aerosol Triple-D is te ultimate universal coil cleaner that can be used on condensers, evaporators, microchannels, roof-top units and mini-split applications. The triple active synergistic highly effective solution is formulated to remove a board range of soils while degreasing and deodorizing. It is ideal for cleaning most metals including aluminum and copper while extending equipment life and diminishing the potential for refrigerant leaks. Using 75% less than comparable products, it reduces the amount of solution needed to clean. Triple-D is biodegradable and NSF approved.,
Diversitech TRIPLE-D-AER
Item#:
TRIPLE-D-AER
Manufacturer Item:
TRIPLE-D-AER
Manufacturer:
DIVERSITECH CORP.
Weil-McLain WMCGA3PIDNS3 Natural Gas Fired Cast Iron High Efficiency Water Boiler
Weil-Mclain WMCGA3PIDNS3
Item#:
WMCGA3PIDNS3
Manufacturer Item:
381-359-073
Manufacturer:
WEIL-MCLAIN
Weil-McLain WMCGA6PIDNS3 Natural Gas Fired Cast Iron High Efficiency Water Boiler
Weil-Mclain WMCGA6PIDNS3
Sid Harvey B132 EPDM Lathe Cut Gauge Glass Washer, 5/8 Inch Dia, 100/Pack
Sid Harvey B132
Item#:
B132
Manufacturer Item:
B132
Manufacturer:
MITCO MFG.
Sid Harvey B135 Gauge Glass Kit, 2/Pack
Sid Harvey B135
Item#:
B135
Manufacturer Item:
B135
Manufacturer:
MITCO MFG.
Henry Technologies S-9104H Brass Reservoir Pressure Valve, 3/8" SAE Female Flare x SAE Male Flare, 500 psi
- Proven design
- Two different pressure settings
- Premium quality teflon seal
- Stainless steel spring
- A reservoir pressure valve is used in a low pressure oil management system
- It is used to vent pressure in the oil reservoir while still maintaining a positive pressure differential between the Oil Reservoir and the compressor crankcase
- This positive pressure ensures an adequate oil supply to the oil level regulators
- The inlet of the valve should be connected directly to the oil reservoir and the outlet should be piped to suction pressure
Henry Technologies S-9104H
Item#:
S-9104H
Manufacturer Item:
S-9104H
Manufacturer:
HENRY TECHNOLOGIES, INC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty
Aspen CA30A2G-13L-00
Item#:
CA30A2G-13L-00
Manufacturer Item:
CA30A2G-13L-00
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty
Aspen CC24A24-145L-059
Item#:
CC24A24-145L-059
Manufacturer Item:
CC24A24-145L-059
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty
Aspen CC60B34-245L-184
Item#:
CC60B34-245L-184
Manufacturer Item:
CC60B34-245L-184
Manufacturer:
ASPEN MFG. LLC