Sporlan Head Pressure Control Valve

• 5/8" OD
• 180 psi
  ,
  ,
  
  
  
  

  Parker OROA-5-180-7/8

Mitco T535-2 Oil Filter Strap Wrench

Great Neck T535-2

Empire Comfort Parts R2223 Pilot Burner W/Orifice DV-25 DV35 DV225 DV235 Direct Vent Wall Furnaces

R2223

Henry Technologies S-5581 Oil Separator Top Inlet/Top Outlet Connection 3/8" OD 3/8" Flare Return

Henry Technologies S-5580

Riello 3949172 Air Tube Assembly F15 Oil Burner 10-1/2" 2.55 - 5.75 GPH

Riello Parts 3949071

National Refrigeration SOLEST 170 Special POE Oil for Commercial and Industrial Refrigeration and Air

Markal 16170

Bell & Gossett L25201 Lubricating Oil 2.5 oz Tube,

Bell & Gossett 118153

12-quart bottles of Black Gold Vacuum Pump Oil. Black Gold Vacuum Pump Oil is the gold standard in vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed, meaning it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky. In extreme temperatures, the oil will be more resistant to contaminants. We still recommend, however, that the oil be changed after every evacuation for maximum performance and pump efficiency.
The best test to see if your oil is contaminated is through a micron gauge. With a leak-free system, if your DV-22N micron gauge is still not reading a deep vacuum, the oil is too contaminated and should be changed. If the micron gauge pulls down to about 50 microns the oil is good."

• Base: Mineral Oil
• Size: 1 qt.
• 12 in. long
• SAE Grade: 15
• ISO Viscosity Grade: 46
• Flash Point: 444.2 Degrees F
• Specific Gravity: 0.877
• Temp. Range: -29 Degrees to 514 Degrees F
• Viscosity @ 100C: 6.395 cSt
• Viscosity @ 40C: 41.54 cSt
• Viscosity Index: 102
• Application: For Use In Any Vacuum Pump
• Standards: ABB G12106, AGMA Grade 3 Non-EP, ASTM D4304 Type 1 Turbine Oil, Dennison Hyd HF-1, GEK 101941K-GEK46506e-GEK 27070, Solar Turbines ES9-224 II, Mil Spec MIL-L-17672D, US Steel 128

Sid Harvey Item #:DVO-12-12: Replaces Part #:'s : 41226,
,

Janed Enterprises MM7371

Sid Harvey E397-32 2-Pole Quite Switch, 2 amp

Sid Harvey Item #:E397-32: Replaces Part #:'s : 6E+132,
,

Sid Harvey E397-310B

Sid Harvey P115-10 Oil Pump Testing Manifold,
,

Sid Harvey P115-1

Henry Technologies S-5587 Non Serviceable Conventional Oil Separator, 7/8" ODS, 3/8" SAE Return, 1/8" NPT Drain

• The function of a helical oil separator is to remove oil from the discharge gas and return it to the compressor either directly or through an oil management system
• Conventional oil separators can be used in a wide variety of applications, common applications include multi-compressor racks and remote condensing units
• These separators are designed for use with scroll and reciprocating type compressors, they are not recommended for screw or rotary vane compressors
• Conventional oil separators are intended for low pressure oil management systems
• ODS refrigerant connection
• SAE flare oil connections
• Low pressure drop
• No moving parts within oil separation zone
• Magnet on oil float to collect debris
• The main components- shell, end caps and connections are made from carbon steel
• The separation screens are made from brass
• The float assemblies are made from stainless steel, brass and copper

,
,

Henry Technologies S-5188

Henry Technologies S-5585 Oil Separator 5/8" OD

Heatcraft Motors 25316201