Bell & Gossett F13600 Full Face Flange Gasket Set 2" Id

F13600

White Rodgers Cooling Controls F92-0659 Regulated Natural to L.P. Gas Conversion Kit

white rodgers f92-0659

Mcdonnell & Miller FS254 Brass and Aluminum Base General Purpose Liquid Flow Switch, 120/240 VAC, 50/60 Hz, SPDT

Universal design serves the widest variety of applications
• 2 electrical knock-outs allows connection from either end
• Sensitivity adjusting screw makes flow adjustment easy
• Single pole, double throw snap switch
• EPDM O-Ring sealed
• 1, 2, 3 and 6" (4) stainless steel paddles included
• Brass wetted body, paddle arm, pivot pin, stainless steel paddles, aluminum housing base and cover
• 125 VA at 120/240 VAC pilot duty
  
  

  FS254

Mcdonnell & Miller 120611 General Purpose Liquid Flow Switch, SPDT, 160 psi, 120/240 VAC

Universal design serves the widest variety of applications
• Replacement for common flow switches from Johnson/Penn, Potter/Taco, Watts, Hydrolevel and other manufacturers
• Sensitivity adjusting screw makes flow adjustment easy
• EPDM O-Ring seal
• Four stainless steel paddles included 1, 2, 3 and 6"
• 27 GPM maximum flow rate without paddle damage
• 5.8 - 17.6 GPM with flow, 5.1 - 6.53 GPM no flow mode of operation 1>
  
  

  McDonnell & Miller FS251

Field Controls FTS-6 Manual Reset Thermal Safety Switch, 12 amp at 120 VAC and 30 VDC, 6 amp at 240 VAC, 1 amp at 120 VDC, SPST-NC, 180 deg F Open

Efficiently detect flue gas spillage due to a blocked flue, continuous down drafting or inadequate draft condition
• With the safety switch wired in series with the burner circuit, the switch will de-energize the systems burner or burner control once it senses the spillage of hot flue gases
• Silver contact X
  
  

  FTS-6

Zilmet IK211 Instaklean 1-1/4" Magnetic Filter

IK211

Zilmet IK210 Instaklean 1" Magnetic Filter

IK210

Diversitech TrueStart IGN-001 Silicon Carbide Hot Surface Universal Ignitor, 120 VAC, 2-3/4 Inch W x 6-1/2 Inch H x 2-3/4 Inch D

Feature a unique universal electrical plug kit, which includes the most common crimp terminals and connector housings to fit the majority of OEM furnaces
• 3 years limited warranty
• 100% tested and approved, completely reliable
• Provides more thermal shock and chemical resistant exterior that is adaptive with room and elevated temperatures
• Includes (2) wire nuts, (5) adapter brackets, (2) screws, (3) connector housings, (4) terminal pins
  
  

  diversitech ign-001

Sealed Unit Parts JV1 Jones Valve,

Sealed Unit Parts JV1

Honeywell M847D-VENT/U 2-Position Replacement Spring Return Actuator, 24 volt, Power Open/Spring Closed Motor

The M847D is a two position, 24 VAC spring return actuators designed to operate ARD, EARD and ZD zone dampers
• Low voltage, spring return damper actuators
• Equipped with anti-rotation and drive shaft extensions for direct mounting to 7 or 16" diameter coupling style dampers
• Adjustable range stops
  
  

  L408J1009

Tjernlund MAC1E is used in conjunction with the UC1 universal control to interlock one additional 24 VAC, 115 VAC or millivolt controlled appliance. Millivolt appliances require a WHKE kit. Powered by and communicates with the UC1 through a factory wired whip. It activates the inducer/blower through its connections to the UC1, and in turn relies on the UC1 fan prover safety circuit (P1 and P2) to allow its interlocked appliance to operate. Any pre/post-purge settings on the UC1 will be defaulted to the MAC1E.

The MAC1E puts an end to difficult and costly job site wiring nightmares
• Circuit board housed in oversized 18 ga electrical box with multiple knock outs for easy wiring connections
  
  

  MAC1E

MA-Line MAxICAP3R Weather Cover for Maxitrol 325-3 Series Regulators

Inexpensive and effective
• Maintains vent limit protection
• Simple installation
• No tools required
• UV safe
  
  

  MA-NAT316-5