Brand Name
BTU
Voltage
Position
Refrigerant
Height
Depth
Width
|◀ ◀ 73 - 84 of 135 ▶ ▶|
View:

Hydronic Air Handler Variable Speed W/TXV 5 Ton R410A Upflow/Horizontal Drain Pans 52" H x 28" D x 26-1/2" W

Baked-On Powder Coated Hydronic Air Handler with TXV Metering
  • Multi function micro-processor circuit board
  • Blower start relay - eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
  • Manual air vent on hot water coil
  • Blower door shut-off switch
  • Slide out hot water coil for easier service
  • 2-speed fan operation
  • Convertible horizontal drain pan
  • PisTon type metering device (standard)
  • Copper tube heating and cooling coils
  • Compatible with all major brands of split condensing units and heat pumps
  • Primary and secondary condensate drain connections
  • Factory installed filter drier
  • 1" filter easily accessible
  • Without pump

    First Company 60HCXB-HW-R410A-TXV

Item#:
60HCXB-HW-R410A-TXV
Manufacturer Item:
6060H3HW4X
Manufacturer:
FIRST CO.

Hydronic Air Handler 5 Ton R454B

STANDARD Features
  • 3-way airflow (except 60/61HCX)
  • Factory installed horizontal drain pan
  • Completely prewired with 0-25kW electric heat (except 0kW models)
  • Compatible with major brands of split condensing units and heat pumps (Contact factory for correct match with outdoor unit)
  • Piston-type metering device or factory or field installed TXV (non-bleed type) on cooling coil
  • Factory installed filter
  • Attractive baked on finish
  • Copper tube cooling coils
  • Primary and secondary drain connections on cooling coil
  • Fully insulated and painted galvanized steel cabinet
  • Factory installed disconnect switch (over 10kW models)

    First Company 60HCXW3010BVB00AAF

    • Item#:
    60HCXW3010BVB00AAF
    Manufacturer Item:
    6060W3010BVB00AAF
    Manufacturer:
    FIRST CO.

    Evaporator Coil Cased 4 Ton R22/R410A Up-Flow/Down-Flow

    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC48A24-210L-059

    • Item#:
    CC48A24-210L-059
    Manufacturer Item:
    CC48A24-210L-059
    Manufacturer:
    ASPEN MFG. LLC
     
    Aspen-Evaporator_Spec

    Evaporator Coil Cased 3-1/2 Ton R22/R410A Up-Flow/Down-Flow

    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC42A24-210L-059

    • Item#:
    CC42A24-210L-059
    Manufacturer Item:
    CC42A24-210L-059
    Manufacturer:
    ASPEN MFG. LLC
     
    Aspen-Evaporator_Spec

    Evaporator Coil Cased 2-1/2 Ton R22/R410A Up-Flow/Down-Flow

    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC30A24-175L-059

    • Item#:
    CC30A24-175L-059
    Manufacturer Item:
    CC30A24-175L-059
    Manufacturer:
    ASPEN MFG. LLC
     
    Aspen-Evaporator_Spec

    Evaporator Coil Cased 2 Ton R22/R410A Up-Flow/Down-Flow

    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC24A24-145L-059

    • Item#:
    CC24A24-145L-059
    Manufacturer Item:
    CC24A24-145L-059
    Manufacturer:
    ASPEN MFG. LLC
     
    Aspen-Evaporator_Spec

    Evaporator Coil Cased 3 Ton R22/R410A Up-Flow/Down-Flow

    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC36A24-175L-059

    • Item#:
    CC36A24-175L-059
    Manufacturer Item:
    CC36A24-175L-059
    Manufacturer:
    ASPEN MFG. LLC
     
    Aspen-Evaporator_Spec

    Air Handler Heat Pump 7-1/2 Ton 460/3 R410A Horizontal Multi-Position and Vertical 56-1/16 H x 49 W x 28-3/16 L

  • Multiposition design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wide range of applications than competitive package air handler lines
  • Economizer accessory provides ventilations air and free cooling
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers
  • Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes
  • Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes
  • High efficiency copper tube / aluminum coils
  • Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance  removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24volt terminal block for control wiring connection.
  • Hot water coil, steam coil, and electric heat accessories are available.

    International Comfort Products FHS091LAAA2A0A

    • Item#:
    FHS091LAAA2A0A
    Manufacturer Item:
    FHS091LAAA2A0A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHS
    FHS091LAAA2A0A_Spec

    Air Handler Commercial Heat Pump 6 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FHX072H2AA0AUA

    • Item#:
    FHX072H2AA0AUA
    Manufacturer Item:
    FHX072H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX072H2AA0AUA_Spec

    Air Handler Commercial Heat Pump 10 Ton 460/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FHX120L2AA0AUA

    • Item#:
    FHX120L2AA0AUA
    Manufacturer Item:
    FHX120L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX120L2AA0AUA_Spec

    Air Handler Commercial Heat Pump 7-1/2 Ton 460 /3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FHX091L2AA0AUA

    • Item#:
    FHX091L2AA0AUA
    Manufacturer Item:
    FHX091L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHX091L2AA0AUA_Spec

    Air Handler Multi-Position 4 Ton 120 VAC 3 Speed Motor TXV R410A 53" H x 26" D x 22" W

    Advance Distributers BCRMB6136-S01 Pre-Painted Gallonvanized Heavy Gauge Steel Air Handler with PisTon Metering and Slant Coil, 48000BTU, 4 Ton, 20 kw, 115 VAC
    • Rifled copper tubing, patented lance fin design
    • High efficiency 3-speed motors
    • Dynamically balanced blowers for quiet, vibration-free operation
    • Drain pans are molded of corrosion proof engineering polymer
    • Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
    • Filter rack with filter - built into every air handler
    • Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
    • Fan time delay available as kit or factory installed
    • Easily converted to counterflow with kit
    • All coils are individually pressure tested at 450 psi, then pressurized and sealed
    • 8" width x 10" diameter wheel
    • Constant speed, 3-speed blower motor
    • Right hand refrigerant and drain connection
    • Slab number (B6)
    • 0 and 5 kw, hot water standard stripped wire
    • 17" width x 17" depth supply duct opening
    • 14" width x 17-1/4" depth return duct opening
    ,
    ,

    Advance Distributers BCRMC3148-S03

    Item#:
    BCRMC3148-S03
    Manufacturer Item:
    BCRMC3148-S03
    Manufacturer:
    ADVANCED DISTRIBUTOR PRODUCTS
     
    ADP_Broc
    |◀ ◀ 73 - 84 of 135 ▶ ▶|
    View: