|◀ ◀ 673 - 684 of 816 ▶ ▶|
View:

Air Handler Mult-Position 2-Stage 5 Ton 208/230 TXV R410A 59-3/16" x 24-11/16" x 22-1/16"

Features
  • Environmentally Balanced Refrigerant Technology
  • R-410A, chlorine-free, non-ozone depleting refrigerant
  • Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant
  • Energy Efficient Operation
  • Variable Speed Constant Airflow ECM (Electronically Commutating Motor) operates efficiently at all speeds
  • Maximizes efficiency of heating and cooling systems
  • Ultra low power consumption during fan only operation
    Indoor Weather Control
  • Warm, comfortable heating air temperatures
  • Unmatched humidity control, especially with thermostat with relative humidity controls
  • Airflow and Sound Technology
  • Diffuser air discharge section for high airflow efficiency and quiet, smooth operation
  • High duct static capability
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and cabinet air leakage less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Condensate Control and Disposal Technology
  • Minimal standing waterless microbial growth for improved IAQ and reduced condensate line clogging and related condensate leakage
  • Condensate fittings relocated away from turbulent airflow patterns at the blower entrance for improved condensate control performance
  • Overflow feature for slope coil units allows condensate to exit the unit without damage to product under clogged primary and secondary line conditions
  • Tested for condensate disposal at conditions much more severe than those required by AHRI
  • Primary and secondary drain connections to comply with HUD
  • All pans constructed of an injection molded glass-filled polycarbonate
    engineered resin material, with brass drain connections.
  • High density, super thick cabinetry insulation with vapor barrier

    International Comfort Products FTMA4B60L0DA

    • Item#:
    FTMA4B60L0DA
    Manufacturer Item:
    FTMA4B60L0DA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FTMA4B60L0DA_Spec

    A/C Coil Cased Heat Pump 3-1/2-4 Ton >>LIMITED STOCK CLEARANCE ITEM<<

    Item#:
    RE84948C175B2505AP
    Manufacturer Item:
    RE84948C175B2505AP
    Manufacturer:
    ADVANCED DISTRIBUTOR PRODUCTS

    AIR,HANDLER,HYDRO,2T,VAR,SPD

    Multi-function micro-processor circuit board with these standard features:
  • Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
  • Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
  • Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after thermostat is satisfied, for increased efficiency
  • 120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied motorized zone valves
  • Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
  • Manual Air Vent on hot water coil
  • Blower door shut-off switch (except 60/61HCXW (PSC))
  • Slide out hot water coil for easier service
  • Copper tube heating and cooling coils
  • Compatible with all major brands of split condensing units and heat pumps
  • Attractive baked-on powder coated cabinet
  • Primary and secondary condensate drain connections
  • Easily accessible 1 filter
  • Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193

    24HCXW2V10AVB00AAF

    • Item#:
    24HCXW2V10AVB00AAF
    Manufacturer Item:
    6024W2V10AVB00AAF
    Manufacturer:
    FIRST CO.
     
    HCXW-Series-Spec

    AIR,HANDLER,HYDRO,2T,W/TXV 40HX 20WX 20D

    Multi-function micro-processor circuit board with these standard features:
  • Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
  • Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
  • Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after thermostat is satisfied, for increased efficiency
  • 120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied motorized zone valves
  • Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
  • Manual Air Vent on hot water coil
  • Blower door shut-off switch (except 60/61HCXW (PSC))
  • Slide out hot water coil for easier service
  • Copper tube heating and cooling coils
  • Compatible with all major brands of split condensing units and heat pumps
  • Attractive baked-on powder coated cabinet
  • Primary and secondary condensate drain connections
  • Easily accessible 1 filter
  • Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193

    24HCXW2010AVB00AAF

    • Item#:
    24HCXW2010AVB00AAF
    Manufacturer Item:
    6024W2010AVB00AAF
    Manufacturer:
    FIRST CO.
     
    HCXW-Series-Spec

    AIR,HANDLER,HYDRO,2.5T,W/TXV R410A

    Multi-function micro-processor circuit board with these standard features:
  • Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
  • Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
  • Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after thermostat is satisfied, for increased efficiency
  • 120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied motorized zone valves
  • Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
  • Manual Air Vent on hot water coil
  • Blower door shut-off switch (except 60/61HCXW (PSC))
  • Slide out hot water coil for easier service
  • Copper tube heating and cooling coils
  • Compatible with all major brands of split condensing units and heat pumps
  • Attractive baked-on powder coated cabinet
  • Primary and secondary condensate drain connections
  • Easily accessible 1 filter
  • Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193

    First Company 30HCXW2010AVB00AAF

    • Item#:
    30HCXW2010AVB00AAF
    Manufacturer Item:
    6030W2010AVB00AAF
    Manufacturer:
    FIRST CO.
     
    HCXW-Series-Spec

    AIR,HANDLER,HYDRO,3T,TXV R410A

    Multi-function micro-processor circuit board with these standard features:
  • Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
  • Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
  • Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after thermostat is satisfied, for increased efficiency
  • 120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied motorized zone valves
  • Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
  • Manual Air Vent on hot water coil
  • Blower door shut-off switch (except 60/61HCXW (PSC))
  • Slide out hot water coil for easier service
  • Copper tube heating and cooling coils
  • Compatible with all major brands of split condensing units and heat pumps
  • Attractive baked-on powder coated cabinet
  • Primary and secondary condensate drain connections
  • Easily accessible 1 filter
  • Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193

    36HCXW2010AVB00AAF

    • Item#:
    36HCXW2010AVB00AAF
    Manufacturer Item:
    6036W2010AVB00AAF
    Manufacturer:
    FIRST CO.
     
    HCXW-Series-Spec

    Hydronic Air Handler Variable Speed W/TXV 4 Ton R410A Upflow/Horizontal Drain Pans 48" H x 28" D x 26-1/4" W

    Baked-On Powder Coated Hydronic Air Handler with TXV Metering
    • Multi function micro-processor circuit board
    • Blower start relay - eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
    • Manual air vent on hot water coil
    • Blower door shut-off switch
    • Slide out hot water coil for easier service
    • 2-speed fan operation
    • Convertible horizontal drain pan
    • PisTon type metering device (standard)
    • Copper tube heating and cooling coils
    • Compatible with all major brands of split condensing units and heat pumps
    • Primary and secondary condensate drain connections
    • Factory installed filter drier
    • 1" filter easily accessible
    • Without pump

      First Company 48HCXB-HW-TXV410

    Item#:
    48HCXB-HW-TXV410
    Manufacturer Item:
    48HCXB-HW-TXV410
    Manufacturer:
    FIRST CO.

    Hydronic Air Handler Variable Speed W/TXV 5 Ton R410A Upflow/Horizontal Drain Pans 52" H x 28" D x 26-1/2" W

    Baked-On Powder Coated Hydronic Air Handler with TXV Metering
    • Multi function micro-processor circuit board
    • Blower start relay - eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
    • Manual air vent on hot water coil
    • Blower door shut-off switch
    • Slide out hot water coil for easier service
    • 2-speed fan operation
    • Convertible horizontal drain pan
    • PisTon type metering device (standard)
    • Copper tube heating and cooling coils
    • Compatible with all major brands of split condensing units and heat pumps
    • Primary and secondary condensate drain connections
    • Factory installed filter drier
    • 1" filter easily accessible
    • Without pump

      First Company 60HCXB-HW-R410A-TXV

    Item#:
    60HCXB-HW-R410A-TXV
    Manufacturer Item:
    6060H3HW4X
    Manufacturer:
    FIRST CO.

    Hydronic Air Handler 5 Ton R454B

    STANDARD Features
  • 3-way airflow (except 60/61HCX)
  • Factory installed horizontal drain pan
  • Completely prewired with 0-25kW electric heat (except 0kW models)
  • Compatible with major brands of split condensing units and heat pumps (Contact factory for correct match with outdoor unit)
  • Piston-type metering device or factory or field installed TXV (non-bleed type) on cooling coil
  • Factory installed filter
  • Attractive baked on finish
  • Copper tube cooling coils
  • Primary and secondary drain connections on cooling coil
  • Fully insulated and painted galvanized steel cabinet
  • Factory installed disconnect switch (over 10kW models)

    First Company 60HCXW3010BVB00AAF

    • Item#:
    60HCXW3010BVB00AAF
    Manufacturer Item:
    6060W3010BVB00AAF
    Manufacturer:
    FIRST CO.

    Packaged Heat Pump, Side Discharge 5 Ton 15 SEER Inverter

    Standard Features
  • R-410A Chlorine-Free Refrigerant
  • Intelligent Oil Return Technology
  • Inverter Driven Rotary Compressor
  • Crankcase Heater Standard Multiple System Protection:
  • High pressure switch and low pressure transducer
  • Compressor liquid return protection
  • Compressor high or low compression ratio protection
  • Compressor high temperature protection
  • High / low voltage protection and over current protection
  • IPM and electronic control board high temperature protection
  • Outdoor coil is capable of withstanding 1000 hour salt spray test according to ASTM B117 standard
  • AHRI certified; ETL listed

    Bosch BRCA-60HWD1N1-M15

    • Item#:
    BRCA-60HWD1N1-M15
    Manufacturer Item:
    8-733-957-162
    Manufacturer:
    BOSCH THERMOTECHNOLOGY CORP
     
    BRCA-60HWD1N1-M15_Spec

    Air Condition Condenser 15 Ton 180K BTU 230/3 VAC 3-Stage, Low Ambient

  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS183HTA0A00A

    • Item#:
    CAS183HTA0A00A
    Manufacturer Item:
    CAS183HTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CAS0-ICP-Warranty_Misc
    CAS0-ICP_Install
    CAS0-ICP_Spec

    Air Condition Condenser 15 Ton 180K BTU 460/3 VAC

  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS181LAA0A0AA

    • Item#:
    CAS181LAA0A0AA
    Manufacturer Item:
    CAS181LAA0A0AA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CAS0-ICP-Warranty_Misc
    CAS0-ICP_Install
    CAS0-ICP_Spec
    |◀ ◀ 673 - 684 of 816 ▶ ▶|
    View: