|◀ 577 - 588 of 876 ▶|
View:
  • Standard Features
  • Energy-efficient inverter technology
  • Multiple indoor fan speeds
  • I feel setting - uses sensor in handheld remote, not wall unit. Ambient temp sensed at location of handheld remote. Not applicable to Multi-Position Air Handlers.
  • °F & °C convertible
  • Auto restart
  • Auto defrost
  • Quiet mode (Wall mounts only)
  • 24-hour timer
  • Basepan heater
  • Compressor intelligent pre-heating
  • Blue fin coil coating

    Westinghouse WHM24SZA21S

  • Item#:
    WHM24SZA21S
    Manufacturer Item:
    WHM24SZA21S
    Manufacturer:
    FUJITSU
    Nortek Global Evaporator Coil Uncased 3 Ton

    Nortek Global (Intertherm) 921482

    Item#:
    921482
    Manufacturer Item:
    921482
    Manufacturer:
    NORTEK GLOBAL-(PHILCO PLUS)
  • Multiposition design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wide range of applications than competitive package air handler lines
  • Economizer accessory provides ventilations air and free cooling
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers
  • Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes
  • Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes
  • High efficiency copper tube / aluminum coils
  • Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance  removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24volt terminal block for control wiring connection.
  • Hot water coil, steam coil, and electric heat accessories are available.

    International Comfort Products FHS091LAAA2A0A

  • Item#:
    FHS091LAAA2A0A
    Manufacturer Item:
    FHS091LAAA2A0A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    What is a Mini-Split?
  • Halcyon systems eliminate the need for a basement or attic-located evaporator unit and bulky ductwork by using thin copper tubing that pumps refrigerant directly to discreet wall mounted or concealed units inside. Even more remarkable, this same unit works in reverse in winter, absorbing heat from the outside air and moving it indoors to heat your home. The result? Efficient cooling and heating for yearround, whole-house comfort in most climates
  • Available in numerous mix-and-match capacities and configurations, there's a Halcyon mini-split system for even the most difficult to heat and cool areas
  • How Does a Mini-Split Work? Like your refrigerator, heat pumps use electricity to pump refrigerant and transfer heat from one space to another. When we transfer heat from within our home to the outdoors, we call it "air conditioning". Conversely, when we transfer heat from the outdoors to within the home, we call it a "heat-pump".

    Fujitsu AOUA72ULBV5

  • Item#:
    AOUA72ULBV5
    Manufacturer Item:
    AOUA72ULBV5
    Manufacturer:
    FUJITSU
  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FHX072H2AA0AUA

  • Item#:
    FHX072H2AA0AUA
    Manufacturer Item:
    FHX072H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FHX120L2AA0AUA

  • Item#:
    FHX120L2AA0AUA
    Manufacturer Item:
    FHX120L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FHX091L2AA0AUA

  • Item#:
    FHX091L2AA0AUA
    Manufacturer Item:
    FHX091L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    REFRIGERATION CIRCUIT
  • Copeland Scroll compressors on select models
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • External high and low refrigerant service ports
  • Copper tube / aluminum fin coil PERFORMANCE
  • Communicating, self- configuring operation when used with Observer Wall Control (TSTAT0201CW)
  • Outdoor temperature sensor factory installed
  • Compressor sound blanket standard
  • Isolation compressor grommets EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Easy access service valves on all models
  • Innovative control box design
  • High and low pressure switches
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant BUILT TO LAST
  • High gloss, baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style

    International Comfort Products TSH448GKA

  • Item#:
    TSH448GKA
    Manufacturer Item:
    TSH448GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC60B34-210L-184

  • Item#:
    CC60B34-210L-184
    Manufacturer Item:
    CC60B34-210L-184
    Manufacturer:
    ASPEN MFG. LLC
    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC36A24-175L-184

  • Item#:
    CC36A24-175L-184
    Manufacturer Item:
    CC36A24-175L-184
    Manufacturer:
    ASPEN MFG. LLC
    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC36A24-140L-184

  • Item#:
    CC36A24-140L-184
    Manufacturer Item:
    CC36A24-140L-184
    Manufacturer:
    ASPEN MFG. LLC
    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC36A24-210L-184

  • Item#:
    CC36A24-210L-184
    Manufacturer Item:
    CC36A24-210L-184
    Manufacturer:
    ASPEN MFG. LLC
    |◀ 577 - 588 of 876 ▶|
    View: