S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
troubleshooting and simplified control box arrangement
International Comfort Products CAS151HAA0A00A
Item#:
CAS151HAA0A00A
Manufacturer Item:
CAS151HAA0A00A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Copeland compressors on all models
FilterDrier supplied with every unit for field installation
Copper tube / aluminum fin coil
EASY TO INSTALL AND SERVICE
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R410A refrigerant
BUILT TO LAST
Bakedon powder coat finish over galvanized steel
Postpainted (black) coil fins
SermaGard coated cabinet screws
Coated inlet grille with 2 spacing standard, alternate models available with grille spacing for
extra protection
5 year limited compressor, coil, and parts warranties
EASY TO INSTALL AND SERVICE
BUILT TO LAST
International Comfort Products N4A348GHB
Item#:
N4A348GHB
Manufacturer Item:
N4A348GHB
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Easy-to-Install and Service
Environmentally balanced R410A refrigerant
Scroll compressor standard on all models
Copper tube/aluminum fin condenser coil
Aluminum tube/aluminum fin evaporator coil
Dehumidification mode (airflow reduction) on all models
Dense wire grille on all models
Pre-painted steel cabinet
Induced-draft combustion and venting
Direct spark ignition
High efficiency ECM indoor blower motor on all models
Stainless steel tubular heat exchanger
Vertical condenser fan discharge
Full perimeter steel base rails
High and low pressure switches provide added reliability for
the compressor
Three-year No Hassle Replacement limited warranty
Lifetime heat exchanger limited warranty with timely
registration
Five-year parts limited warranty
With timely registration, an additional five-year parts
limited warranty
* For residential applications only. See warranty certificate for complete details
and restrictions, including warranty coverage for other applications.
Installs easily on a rooftop or at ground level
Easy threepanel accessibility for maintenance
and installation
Easily converts to down discharge applications
Combination gas heating, heat pump heating
and electric coolin
International Comfort Products PDD460115K000K
Item#:
PDD460115K000K
Manufacturer Item:
PDD460115K000K
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Easy-to-Install and Service
Environmentally balanced R410A refrigerant
Scroll compressor standard on all models
Copper tube/aluminum fin condenser coil
Aluminum tube/aluminum fin evaporator coil
Dehumidification mode (airflow reduction) on all models
Dense wire grille on all models
Pre-painted steel cabinet
Induced-draft combustion and venting
Direct spark ignition
High efficiency ECM indoor blower motor on all models
Stainless steel tubular heat exchanger
Vertical condenser fan discharge
Full perimeter steel base rails
High and low pressure switches provide added reliability for
the compressor
Three-year No Hassle Replacement limited warranty
Lifetime heat exchanger limited warranty with timely
registration
Five-year parts limited warranty
With timely registration, an additional five-year parts
limited warranty
* For residential applications only. See warranty certificate for complete details
and restrictions, including warranty coverage for other applications.
Installs easily on a rooftop or at ground level
Easy threepanel accessibility for maintenance
and installation
Easily converts to down discharge applications
Combination gas heating, heat pump heating
and electric coolin
International Comfort Products PDD424060K000K
Item#:
PDD424060K000K
Manufacturer Item:
PDD424060K000K
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Friedrich Connect App
Connect in minutes
Set a seven-day custom schedule that fits your lifestyle
Power units off and on, increase or decrease a unit's set point temperature, change system cool, fan, heat, and auto settings and fan speeds
With our advanced grouping program, you can control multiple units to work independently or as a single system. You can even invite other users to manage one or more of your units
Quietmaster Technology
Steel inner wall and extra dense insulation blocks outdoor noise
Vibration isolating design and components reduce operating noise
Precision engineering delivers maximum airflow and air dispersion at low sound levels
Motor mount with dual resilient rings preventing metal to metal contact that can cause noise and vibration
Solid steel wheel blower housing: provides maximum sound reduction
Extra-thick rubber grommets: Absorb motion and sound
High-efficiency compressor: Mounted on large, vibration-absorbing grommets
Friedrich Air Conditioning WCT12A30A
Item#:
WCT12A30A
Manufacturer Item:
WCT12A30A
Manufacturer:
FRIEDRICH AIR CONDITIONING CO.
Friedrich Air Conditioning KCQ08A10A Thru-The Wall Unit 8K BTU 120 VAC (No Sleeve)
Friedrich Air Conditioning KCQ08A10A
Item#:
KCQ08A10A
Manufacturer Item:
KCQ08A10A
Manufacturer:
FRIEDRICH AIR CONDITIONING CO.
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty.
Aspen CC48A24-210L-059
Item#:
CC48A24-210L-059
Manufacturer Item:
CC48A24-210L-059
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty.
Aspen CC42A24-210L-059
Item#:
CC42A24-210L-059
Manufacturer Item:
CC42A24-210L-059
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty.
Aspen CC30A24-175L-059
Item#:
CC30A24-175L-059
Manufacturer Item:
CC30A24-175L-059
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty.
Aspen CC24A24-145L-059
Item#:
CC24A24-145L-059
Manufacturer Item:
CC24A24-145L-059
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty.
Aspen CC36A24-175L-059
Item#:
CC36A24-175L-059
Manufacturer Item:
CC36A24-175L-059
Manufacturer:
ASPEN MFG. LLC
International Comfort Products DLCURAH36ABK
Item#:
DLCURAH36ABK
Manufacturer Item:
DLCURAH36ABK
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS