Features

MaxAlloy coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability

Next generation even-flow distributor Designed for balanced refrigerant flow and even coil circuit performance

Next generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor

Variable speed operation Provides flexibility in application as well as upgraded system efficiency

Next generation insulation and gasket design Reduces thermal transmission paths and reduces sweating

Electric heat kit 8HK field-installed series available for easy installation and service application

Two-stage operation Provides flexibility in application with single-stage and two-stage outdoor equipme

Features

Next generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.

Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.

Next generation insulation and gasket design Reduces thermal transmission paths and reduces sweating.

Nine speed standard ECM blower motor Provides increased system compatibility.

Electric heat kit 8HK field-installed series available for easy installation and service application Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.

Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.

Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

Features

Next generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.

Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.

Next generation insulation and gasket design Reduces thermal transmission paths and reduces sweating.

Nine speed standard ECM blower motor Provides increased system compatibility.

Electric heat kit 8HK field-installed series available for easy installation and service application Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.

Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.

Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

Features

Next generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.

Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.

Next generation insulation and gasket design Reduces thermal transmission paths and reduces sweating.

Nine speed standard ECM blower motor Provides increased system compatibility.

Electric heat kit 8HK field-installed series available for easy installation and service application Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.

Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.

Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

Features

Next generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.

Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.

Next generation insulation and gasket design Reduces thermal transmission paths and reduces sweating.

Nine speed standard ECM blower motor Provides increased system compatibility.

Electric heat kit 8HK field-installed series available for easy installation and service application Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.

Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.

Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

Features

MaxAlloy coil Long-life aluminum coils built to deliver lasting performance, efficiency, and reliability

Next generation even-flow distributor Designed for balanced refrigerant flow and even coil circuit performance

Next generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a variable speed ECM motor

Variable speed operation Provides flexibility in application as well as upgraded system efficiency

Next generation insulation and gasket design Reduces thermal transmission paths and reduces sweating

Electric heat kit 8HK field-installed series available for easy installation and service application

Two-stage operation Provides flexibility in application with single-stage and two-stage outdoor equipme

Features

Next generation high-efficiency blower Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.

Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.

Next generation insulation and gasket design Reduces thermal transmission paths and reduces sweating.

Nine speed standard ECM blower motor Provides increased system compatibility.

Electric heat kit 8HK field-installed series available for easy installation and service application Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.

Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.

Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

STANDARD Features

Modes: Cool, Heat, Dry, Fan, Auto

Factory installed leak detection system

Conventional Lineset

Dual Voltage (115V/230V)

Constant Air Motor/Blower

Quiet indoor operation

Anti-corrosive fin coating

International Comfort Products D5FUAAH36XAK

STANDARD Features

Modes: Cool, Heat, Dry, Fan, Auto

Factory installed leak detection system

Conventional Lineset

Dual Voltage (115V/230V)

Constant Air Motor/Blower

Quiet indoor operation

Anti-corrosive fin coating

International Comfort Products D5FUAAH24XAK

STANDARD Features

Modes: Cool, Heat, Dry, Fan, Auto

Factory installed leak detection system

Conventional Lineset

Dual Voltage (115V/230V)

Constant Air Motor/Blower

Quiet indoor operation

Anti-corrosive fin coating

International Comfort Products D5FUAAH30XAK

Features/Benefits
One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance. R-454B is the latest choice of refrigerant to help meet the 2025 GWP requirement. This unit is designed and tested with R-454B and contains a dissipation system. Easy Installation Factory-assembled package is a compact, fully self-contained, combination gas heating/electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/ cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications. Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging. Convertible duct configuration Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes two horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode. Efficient operation High-efficiency design offers SEER2 (Seasonal Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel Utilization Efficiency) ratings of 81.0%. Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units. Low NOx units meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement. Durable, dependable components Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment. Turbo-tubular heat exchangers are constructed of stainless steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air. In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer. ECM Motor is standard on all models. Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field-installed accessory. Thermostat controls Time Guard® II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field-installed anti-short cycle kit is recommended. Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with non-oz.one depleting and low global warming potential R-454B refrigerant charge. Refrigerant service connections make checking operating pressures easier. Factory-installed leak detection dissipation system for added safety. High Pressure Switch provides added reliability for the compressor.

International Comfort Products Commercial PGB424060K000B

Features/Benefits
One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance. R-454B is the latest choice of refrigerant to help meet the 2025 GWP requirement. This unit is designed and tested with R-454B and contains a dissipation system. Easy Installation Factory-assembled package is a compact, fully self-contained, combination gas heating/electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/ cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications. Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging. Convertible duct configuration Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes two horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode. Efficient operation High-efficiency design offers SEER2 (Seasonal Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel Utilization Efficiency) ratings of 81.0%. Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units. Low NOx units meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement. Durable, dependable components Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment. Turbo-tubular heat exchangers are constructed of stainless steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air. In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer. ECM Motor is standard on all models. Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field-installed accessory. Thermostat controls Time Guard® II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field-installed anti-short cycle kit is recommended. Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with non-oz.one depleting and low global warming potential R-454B refrigerant charge. Refrigerant service connections make checking operating pressures easier. Factory-installed leak detection dissipation system for added safety. High Pressure Switch provides added reliability for the compressor.

International Comfort Products Commercial PGB442090K000B