Refrigeration Research 1918 Liquid Receiver 5" x 10" 6 Pounds,
,

1918

1918

Refrigeration Research 1921 Liquid Receiver Tank Assembly 4" x 10" 4 LBS,
,

1921

1921

Refrigeration Research 1911 Liquid Receiver 6" x 12" 10 Pounds 3/8" Flare x 3/8" Flare,
,

Refrigeration Research 1911

Refrigeration Research 1911

Refrigeration Research 3738 Suction Accumulator 7/8" Vertical,
,

Refrigeration Research 3738

Refrigeration Research 3738

Refrigeration Research 3706 Suction Accumulator 1-3/8" Vertical,
,

3706

3706

Refrigeration Research 3703 Suction Accumulator 3/4" Vertical,
,

3703

3703

Refrigeration Research 3702 Suction Accumulator 5/8" Vertical,
,

3702

3702

Refrigeration Research 3212 Liquid Receiver Tank Assembly 6" x 8" 16 LBS,

,

Refrigeration Research 3212

Refrigeration Research 3212

Air conditioning, heat pump, truck refrigeration and many other applications require intermittent operation of the refrigeration compressor. Especially in remote applications, the suction line may trap or hold quantities of liquid which are suddenly dumped into the compressor as it starts up. This is frequently the cause of broken valves, pisTons, broken or bent connecting rods, blown gaskets and bearing washout. Proper installation of the Refrigeration Research suction accumulator in the suction line, just before the compressor, eliminates damage. If correctly sized, relatively large quantities of liquid refrigerant may return through the suction line and the suction accumulator prevents damage to the compressor. Liquid is temporarily held in the suction accumulator and metered back to the compressor along with any oil, at a controlled rate, through the metering orifice. Therefore, damage to the compressor is prevented and the compressor immediately and quietly goes to work.

,
,

Refrigeration Research 3700-01

Refrigeration Research 3700-01

Refrigeration Research 5315 Refrigeration Receiver, 6 lb Capacity, 3/8" SAE Inlet x 3/8" SAE Valve Outlet, 10" L x 5" Diameter

• Refrigeration research receivers have been made continuously for over 50 years
• They are used widely by original equipment manufacturers throughout the industry
• They are backed by a reputation for quality and service
• These receivers with valves and fittings attached are hydrogen brazed for cleanliness and pressure tested for reliability
• 430 deg F fusible plug is installed on all receivers except #2030, #2039, and #9028
• All valves are supplied with steel stem caps with copper gaskets and brass flare nuts and caps, all receivers are powder coated for excellent corrosion resistance
• Pressure tested for 500 psi maximum working pressure

,
,

5315 6 LB RECEIVER

5315 6 LB RECEIVER

Henry Technologies S-5585 Oil Separator 5/8" OD

S-5585

S-5585

White Rodgers Cooling Controls AOFD is designed specifically for refrigerant systems that use POE oil.The AOFD protects compressors by removing moisture and trapping contaminants.Oil Filter Drier, 3/8", Male Flare

• Designed to clean and dry POE oil
• 3/8" male flare connections for easy replacement
• 3 micron filtration for optimum oil cleaning
• Large filter surface area to provide maximum filtration
• Contains desiccant for moisture removal
• Designed to operate at a very low pressure drop
• Dual access valves for pressure drop monitoring

,

AOFD553

AOFD553