A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• These ball valves employ the latest robotic welding technology
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

,
,

586WAS-10ST

586WAS-10ST

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:586WAS-8ST: Replaces Part #:'s : ABV4A | ABV4 |,
,

586WAS-8ST

586WAS-8ST

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:591WAS-11ST: Replaces Part #:'s : ABV9A | ABV9 |,

591WAS-11ST

591WAS-11ST

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:586WAS-12ST:,
,

587WA-12ST

587WA-12ST

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:586WAS-6ST: Replaces Part #:'s : ABV3A | ABV3 |
,
,

586WAS-6ST

586WAS-6ST

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• These ball valves employ the latest robotic welding technology
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:586W-8ST: Replaces Part #:'s : 900204 | ABV4 | ABV4A
,

586W-8ST

586W-8ST

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:592WAS-13ST: Replaces Part #:'s : ABV11A | ABV11 |,
,

592WAS-13ST

592WAS-13ST

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• These ball valves employ the latest robotic welding technology
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:586W-10ST: Replaces Part #:'s : ABV5 | ABV5-062106 | V34202 | 900205 | ABV5A,
,

586W-10ST

586W-10ST

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:587WAS-14ST: Replaces Part #:'s : A 17864
,

587WAS-14ST

587WAS-14ST

White Rodgers Cooling Controls Soild Core Liquid Line Drier 3/8" SAE

• Rated for 600 PSI
  
  • R410A Usage
    
    • Full Flow Fittings for Low Pressure Drop
      
      • Protect Refrigeration Systems from Liquid and Solid Contaminants
        
        • Moisture and Acid Removal
          
          
          
          

          ADK163

          
          

          ADK163

White Rodgers Cooling Controls EK 053S VV Epoxy Powder Coated Steel Contractor Liquid Line Filter Drier, 3/8" Male x Female

• Extended solid copper connections
• Dual access valves for faster and easier system diagnosis
• Incorporates all the internal features of the premium EK
• Desiccant blend - optimized for high water capacity and acid capacity

,

EK083MF STD

EK083MF STD

White Rodgers Cooling Controls Epoxy Powder Coated Suction Line Filter Drier, 7/8" OD

• Dual access valves for easy pressure readings
• Activated carbon blend for soluble contaminant and wax
• Solid copper connections
• Charcoal blend

Sid Harvey Item #:ASK307S-VV-HH: Replaces Part #:'s : C-307-S-T-HH,